Attachment Adjustment
The supply flow rate to an attachment, the operational priority
for combined operation of an attachment and arm roll-in/arm
roll-out can be adjusted on the Attachment Adjust screen.
The attachment adjustment can be done when the work
mode is set to an attachment other than the bucket. Select an
attachment other than the bucket on the work mode screen.
(Refer to "Work Mode".)
Flow Rate Adjustment
1. Press selector knob (2) while displaying Basic Screen (1)
to display Main Menu screen (3).
2. Rotate selector knob (2) to highlight Setting Menu (4).
3. Press selector knob (2) to display Setting Menu screen
(5).
4. Rotate selector knob (2) to highlight Attachment
Adjustment (6).
OPERATOR'S STATION
1-39
1
MDAA-01-001EN
2
MDCD-01-026
3
4
MDAA-01-114EN
5
6
MDAA-01-128EN