Silvercrest LHL 2000 B1 Operating Instructions Manual page 10

DANGER
Fire risk through contact with materials!
The risk of fire exists if the heating elements come into contact with
flammable materials!
► Do not place the appliance in the vicinity of curtains and other flammable materials.
► Do not allow flammable materials (i.e. draperies) to come into contact with the
appliance.
► Do not cover the appliance.
Before initial use
Remove all packaging materials and all transport securing appliances from the appliance.
NOTICE
► With initial use, for a brief period, a light odour accumulation can occur. This is
normal and completely harmless.
Electrical connection
For safe and faultless operation of the appliance after electrical connection observe the
following advice:
TAKE NOTE
► Before connecting the appliance compare the connection data (voltage and frequency)
on the rating plate with that of your mains power supply. This data must be in agree-
ment so as to avoid damage to the appliance.
► Make sure that the mains power cable is not damaged and is not running over hot
surfaces and/or sharp edges.
► Make sure that the mains power cable is not stretched or knotted.
♦ Insert the plug into a mains power socket.
Operating components
Carry handle
Mains power cable
2
3 Safety switch
4 Operating switch
5 Operating light
6 Temperature regulator
LHL 2000 B1
GB │ IE │ NI │ 7 ■