Related Manuals for D-Link DBA-3621P
Summary of Contents for D-Link DBA-3621P
- Page 1 Quick Installation Guide Nuclias Cloud-Managed AC1300 Wave 2 Outdoor Access Point DBA-3621P Additional documentation is also available on the D-Link website...
- Page 2 Contents English...
-
Page 3: Before You Begin
Before You Begin Hardware Overview This installation guide provides instructions LED Indicators for installing the DBA-3621P on your network. Additional documentation is also available on the D-Link support website. • Nuclias Cloud Manual: For additional information and instructions on how to configure the device using Nuclias Cloud. -
Page 4: Interface Connectors
Configuration Table 2: Interface Description Using Nuclias Cloud The DBA-3621P is designed to be managed through the Nuclias Cloud. Refer to the Nuclias Cloud Manual for detailed configuration instructions. To use Nuclias Cloud, your device must be connected to the Internet. -
Page 5: Manual Configuration
Connect the management computer to www.nuclias.com. the default SSID of the DBA-3621P. The SSID will be in the format DBA-3621P-XXXX Enter your D-Link Nuclias username and password, then click Login. -
Page 6: Pole Mounting
Figure 5: Attaching the Mounting Base Figure 7: Attaching the Mounting Plate Secure the mount base to the pole using Align and attach the DBA-3621P to the the U-bolt and the four included nut mounting plate using the four included fasteners. -
Page 7: Connecting The Grounding Wire
Attach connected to an electrical ground. the grounding wire to the DBA-3621P using the included screw. Figure 10: Attaching the Grounding Wire Tighten the grounding wire to the DBA-3621P until it is securely attached. -
Page 8: Federal Communication Commission Interference Statement
Appendix - Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 9: Industry Canada Statement
Professional installation instruction Please be advised that due to the unique function supplied by this product, the device is intended for use with our interactive entertainment software and licensed third-party only. The product will be distributed through controlled distribution channel and installed by trained professional and will not be sold directly to the general public through retail store. - Page 10 (ii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
- Page 11 requirement. External antenna Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of ISED limit and is prohibited. Installation procedure Please refer to user’s manual for the detail.
- Page 12 2. Instructions pour l’installation de ce conducteur à la terre du bâtiment par une PERSONNE QUALIFIÉE. 3. Contactez le distributeur agréé de D-Link pour les accessoires connexes (câble d’interconnexion extérieur, passe-câble, câble, etc.) pour l’achat et l’installation.
- Page 13 Notes...
- Page 14 Notes...
- Page 15 Notes...
- Page 16 Notes...
- Page 18 Ver. 1.00(WW)_90x130 2020/07/20 290726002820A10...