Using The Ignite-Ux Interface; The Basic Tab - HP 9000 Manual

• You can choose a pre-set configuration in the "Repeat Install" selection
list to repeat a previously installed configuration and execute it within
Ignite-UX, without further intervention.

Using the Ignite-UX Interface.

After you choose to install a system, you will see the following screen.

The Basic Tab

Figure 5-8
NOTE If you see the following message:
Settings from a previous installation session were found at
startup.
current session?
Chapter 5
Do you wish to retain these settings for the
Installing from the Ignite-UX Server
Configuring the Installation
91