HP 9000 Manual page 73

Dtc device file access utilities and telnet port identification

Hide thumbs Also See for 9000:

Serious Messages

(200) ERROR: Unable to obtain data from network: system error <system_error>: <system_message>

CAUSE: There was no data to receive from the network due to the system error given.

NOTE: This message is followed by messages (296), (297), (298), and (299).

NOTE: System error 232 - A transport reset was received from the remote terminal server.

System error 238 - A transport connection timeout was received from the remote terminal server.

ACTION: Determine if the terminal server and device are operational and enable

the printer or restart the application if they are.

(201) ERROR: Binary negotiation failed on opening connection

CAUSE: The binary negotiation was not completed successfully on opening a

connection to the device on the remote terminal server.

NOTE: This message is followed by message (296), (297), and (299).

ACTION: Determine if the terminal server and device can accept binary data

and restart the application if they can.

(202) ERROR: Invalid initial status request received

CAUSE: The initial status request to the device on the remote terminal server failed.

NOTE: This message is followed by message (296), (297), and (299).

ACTION: Determine if the terminal server and device are operational and restart

the application if they are.

ocd

Appendix B: ocd Logging Messages

ocd

B-7