Setup Overview
1. Determine the installation location
WARNINGN
Please refer to
NOTEN
To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor's
screen area, on the table before laying the monitor face down when installing the monitor stand or mounting
accessories.
2. Install the remote control batteries
The remote control is powered by two 1.5 V AAA batteries.
To install or replace batteries:
CAUTIONN
Please refer to
NOTEN
• The batteries supplied with the remote control may become empty quickly depending on their condition.
Therefore, replace them with new batteries early.
• If you do not intend to use the remote control for a long period of time, remove the batteries.
3. Connect external equipment
• To protect the external equipment, disconnect the power cord of the monitor before making connections.
• Refer to the user's manual of your equipment for further information.
NOTEN
Do not connect or disconnect cables when the monitor's main power or other external equipment's power is turned
on.
"WARNING
7",
"WARNING
1
"CAUTION
8".
8",
"WARNING
9",
"WARNING
2
English - 10
10", and
"WARNING
11".
4
3