Panasonic LP-GS Series Serial Communication Command Manual page 103

Name Omit
Laser power
correction to Y
separator
Scan speed
correction to Y
separator
Total data length
* Setting request data are variable length.
Reference
• Only when the request data contains the object number with the value after the decimal point, the object number of the
response data contains the value after the decimal point.
⿎ Example of command settings
Condition: Code type = Data matrix
Object No. = 1, X-position = 15, Y-position = -20, Rotation angle = 0, Code type = 20,
Module height = 1, Module width = 1, Mode = 0, Symbol size (vertical) = 24,
Symbol size (horizontal) = 24, Human readable text = 0, Code marking direction = 0,
Module marking order = 2
• Setting
Transmission data
• Readout
Transmission data
Response data
Data
length Data contents
[byte]
Max. 3* "000"–"999" [%]
Max. 3* "001"–"999" [%]
Max. 83 It is the length including the separator ",".
[STX] BRF S
[STX] BRF R
[STX] BRF A
ME-LPGS-SR-5
• These settings are applied to the
separator placed between 1D and
2D.
• The correction ratio is calculated
using the value set at the laser
settings as 100%.
1,15,-20,0,20,1,1,0,24,24,0,0,2
1 [CR]
0001,+015.000,-020.000,+000.000,20, 1 .000, 1 .000,0,
24,24,0,0,2
Remarks
[CR]
[CR]
103