Toshiba IPedge Manual page 8

Call Park
Call Park Orbits
Park and Page
© 2011 Toshiba Information Systems, Inc. All Rights Reserved. All product, service and company names are trademarks, registered trademarks or
service marks of their respective owners. This document and the information included herein is subject to change without notice.
Call Park gives any station, regardless of type, a method for holding calls.
By parking a call, you are free to make other calls and retrieve the call at a
later time or use the paging system to announce a call to be picked up by
someone else on the system. Any call can be parked. Parking a call to
your phone is known as Local Park, parking a call on someone else's
phone is known as Remote Park, and if a general orbit is used, it is called
Auto Park.
The Call Park feature enables a station user to place a call temporarily in
an orbit so that the call can be retrieved by any user, either from the same
station or from a different station. Personal Park Orbits are available to
any type of telephone, including standard telephones. If a call is parked,
but not retrieved within a preprogrammed time period, it will recall the
parking telephone. The Park Recall timer is a system wide timer setting.
This feature enables station users to park a call (in a General or Personal
Park Orbit), enter a Page Zone or Group access code, and then
announce the orbit number of the waiting call to the Paged party. A pre-
programmed One Touch button can be assigned to telephones to
automatically connect to a predesignated External Paging circuit, a
Telephone Paging group or both.
IPedge / VIPedge Feature Desc. 7/25/12
1-1