Specifications; Attachments/Accessories - Toro Greensmaster TriFlex 3420 Operator's Manual

Cutting Unit Power Disconnect
Connectors
Before installing, removing, or working on the cutting
units, disconnect the cutting units from the power
supply by separating the cutting unit power disconnect
connectors (Figure 20), located at the base of the
rollover bar on the left side of the traction unit. Plug
the connectors together before operating the machine.
Figure 20
1. Cutting unit power disconnect connector
CAUTION
If you do not disconnect the power to the
cutting units, someone could accidentally
start the cutting unit, causing serious injury
to hands and feet.
Always separate the cutting unit power
disconnect connectors before working on the
cutting units.

Specifications

Note:
Specifications and design are subject to
change without notice.
Width of cut
Wheel tread
Wheel base
Overall length (w/baskets)
Overall width
Overall height
Weight
g016588
151 cm (59.5 inches)
128 cm (50.5 inches)
119 cm (46.9 inches)
249 cm (98.0 inches)
179 cm (70.6 inches)
205 cm (80.8 inches)
Refer to the machine serial
tag (Figure 1).

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro
genuine parts. When it comes to reliability, Toro
delivers replacement parts designed to the exact
engineering specification of our equipment. For peace
of mind, insist on Toro genuine parts.
24