Setting The Sentron Mindsphere Application With 7Kn Powercenter 3000 - Siemens SENTRON 7KN POWERCENTER 3000 Manual

Functions
5.5 Communication with MindSphere
5.5.1.1

Setting the SENTRON MindSphere application with 7KN POWERCENTER 3000

The current setup of 7KN Powercenter 3000 (system structure and device parameterization)
is saved in a file (*.json) via the web user interface "Settings → Cloud → MindSphere →
Export project data for SENTRON MindSphere Application".
This file (*.json) is used by SENTRON powermind to automatically generate the IoT data
model and select the device dashboards. The device selection made by the user and the
MindSphere onboarding key are stored in a response file (*.json).
This response file (*.json) is provided to 7KN Powercenter 3000 via "Settings → Cloud →
MindSphere → Import cloud data".
Note
Automatic onboarding
After the file has been imported, this data is interpreted, an encrypted communication with
MindSphere is established and authentication is performed. The data transfer is then started
(see Onboarding with 7KN POWERCENTER 3000 (Page 65)).
This process must be actively completed by the user via "Start data transfer", see Starting
MindSphere data transfer (Page 67).
This procedure must be repeated if setup changes are required.
Setup changes may be required due to changes in the 7KN Powercenter setup or due to an
increased demand for information from SENTRON powermind.
62
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03