Table of Contents
Advertisement
7. Electromagnetic Environment
7.1. Guidance and Manufacturer's Declaration – Electromagnetic Emissions
- The S-PATCH is intended for use in the electromagnetic environment specified below.
The customer or the user of the S-PATCH should assure that it is used in such an
environment.
Immunity test
RF Emissions
CISPR 11
RF Emissions
CISPR 11
7.2. Guidance and Manufacturer's Declaration – Electromagnetic Immunity
The S-PATCH is intended for use in the electromagnetic environment specified below.
-
The customer or the user of the S-PATCH should assure that it is used in such an
environment.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Samsung Confidential
Compliance
Group 1
Class B
IEC 60601
Test level
±8kV Contact
±2,4,8,15 kV air
Electromagnetic environment - Guidance
The S-PATCH uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment
The S-PATCH is suitable for use in ail establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes
Compliance level
±8kV Contact
±2,4,8,15 kV air
Electromagnetic environment -
Guidance
Floors should be wood, concrete
or ceramic tile. If floors are
covered with synthetic material,
the relative humidity should be
at least 30%.
[27]
Advertisement
Table of Contents
