Hitachi X200 Series Connection Manual page 44

6.6 WJ200 series
Device
Coil
Holding register
*1 For word addresses, only specify addresses with "1" as the last digit.
• Holding register 0900h is an address for writing to nonvolatile memory. By storing "1" in
• You can only set the Read Area Size for the system area in the External Device. Please refer to
• Refer to the precautions on manual notation for icons in the table.
GP-Pro EX Device/PLC Connection Manual
Bit Address
00001 - 00058
-
0900h, writing to nonvolatile memory is enabled.
the GP Pro-EX Reference Manual for Read Area Size.
Cf. GP Pro-EX Reference Manual "LS Area (Direct Access Method Area)"
"Manual Symbols and Terminology"
This address can be specified as system data area.
Word Address
00001 - 00041
40001 - 4252D
44
Inverter MODBUS RTU Driver
32bits Notes
*1