Advertisement
4. CHECKING THE HARDWARE STATUS
5. RAID status [D Model only]
The RAID status is displayed.
RAID status
No.
1
Normal
2
3
4
5
Degraded
6
7
Fail
8
Unknown –
6. Refresh button
If you click this button, the latest hardware status is acquired and the information in
the window is refreshed.
7. OK button
Click this button to close the Hardware status window.
Figure 4-6 shows an example of the Hardware status window (D model) when a hardware
error is detected.
Table 4-5 RAID Status and Displayed Information
Displayed information
Detailed
information
[Optimal]
–
[Optimal (Media Error)]
[Degrade]
–
[Degrade (Media Error)]
[Degrade (Rebuild: xx%)]
Rebuild
[Degrade (Rebuild: xx%,
Media Error)]
–
[Fail]
[Unknown]
Figure 4-6 Hardware Status Window (Error Case)
Media error occurs.
xx: Progress of the rebuild
xx: Progress of the rebuild
Media error occurs.
The system has stopped. This
message may not be displayed.
4-10
Note
process
process
Advertisement
