Toro Prior LC1P65FA Service Manual page 42

Ignition / Charge Coil Gap Adjustment
High Voltage Ignition Systems can be Dangerous - Use Caution when Servicing Ignition
Systems
1. Install the coil and lightly tighten the mounting bolts.
2. Rotate engine so the coil is aligned with the magnet portion of the flywheel.
3. Insert the feeler gauge between the flywheel and coil.
4. Adjust the coil gap at both side of the coil.
5. Torque the coil mounting bolts to specification – 7.5 ft-lbs (10 Nm)
.
.01" (0.254 mm)
Ignition / Charge Coil Gap
Ignition Coil Resistance Inspection
Primary Coil
Place Ohm meter leads between the harness connection
A
lead and the exposed metal coil leg.
1.1-1.6 Ω
A - Primary Coil Resistance
Secondary Coil
Place Ohm meter leads between exposed metal coil leg
and the spark plug terminal connection.
B
10.5 KΩ +/- 15%
B - Secondary Coil Resistance
38