Hitachi EC701HP Operation Manual page 57

Section 3 - Installation (ATSC EC701HP Transmitter)
3- Insert and fasten the power drawer in the rack.
4- Insert and fasten the digital exciter B.
5- Insert and fasten the digital exciter A.
6- Insert and fasten the Ethernet* switch
7- Check the presence and physical integrity of all the drawers' power feeding and communication
points.
SWITCH ETHERNET*
EXCITER A
(MOD GV 4992)
EXCITER B
(MOD GV 4992)
POWER AMPLIFIER
(MOD GV 40087)
*Ethernet is a trademark of the Xerox Corporation.
Manual Rev. 0.0 - March 2018
Figure 3-16
Positioning of the drawers
3-20