Chapter 5: Operation
compressors requires thorough knowledge of the equipment,
the application and proper starting procedures. For the safe
operation of this compressor, do not attempt to start the unit
Before starting a new, relocated or reapplied compressor, or
after a major overhaul, ensure that the Pre-startup checklist
items have been completed. This checklist is designed to
ENSURE ALL GAS IS REMOVED BEFORE PERFORMING
ENSURE ALL GAS IS PROPERLY REMOVED BEFORE OPERATING.
The startup, commissioning and operation of HSR
without being knowledgeable.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (9)
assist the technician for proper start up.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145 (f) (9)
H O T S U R F A C E
DO NOT TOUCH THE COMPRESSOR WHEN IN USE.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (6)
R O T A T I N G C O M P O N E N T
DO NOT TOUCH MOVING PARTS WHEN IN USE.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (6)
E X P L O S I V E
MAINTENANCE.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (7)
A S P H Y X I A T I O N
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (7)
H301/302 HSR Compressors | Rev. 2.2 | 53