Yamaha Digital Sound Projector YSP-3050 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Speaker System
  5. YSP-3050 - Digital Sound Projector Home Theater...
  6. Owner's manual

Yamaha Digital Sound Projector YSP-3050 Owner's Manual

Yamaha digital sound projector owner's manual
Hide thumbs Also See for Digital Sound Projector YSP-3050:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
U
YSP-3050
Digital Sound Projector
TM
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Yamaha Digital Sound Projector YSP-3050

Summary of Contents for Yamaha Digital Sound Projector YSP-3050

  • Page 1 YSP-3050 Digital Sound Projector OWNER’S MANUAL...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ■ Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated...
  • Page 3 – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
  • Page 4 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

  • Page 5: Table Of Contents

    INTRODUCTION Overview... 2 Features ... 3 Using this manual ... 5 Supplied accessories ... 6 Controls and functions ... 7 Front panel ... 7 Front panel display ... 8 Rear panel ... 9 Remote control... 10 PREPARATION Installation... 13 Before installing this unit... 13 Installing this unit ...

  • Page 6: Overview

    Yamaha YSP-3050 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome wiring go hand-in-hand with the enjoyment of multi-channel surround sound.

  • Page 7: Features

    ◆ XM Satellite Radio information displaying capability iPod™ Controlling Capability ◆ DOCK terminal to connect a Yamaha iPod universal dock (such as the YDS-10, sold separately), which supports iPod (Click and Wheel), iPod nano, and iPod mini ◆...
  • Page 8 ” logo and “IntelliBeam” are trademarks of Yamaha Corporation. The “ ” logo and “Cinema DSP” are registered trademarks of Yamaha Corporation. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

  • Page 9: Using This Manual

    Notes • This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner’s manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified. •...

  • Page 10: Supplied Accessories

    Supplied accessories Check that you have received all of the following parts. Remote control (×1) STANDBY/ON POWER POWER DOCK AUX1 AUX2 AUX3 INPUT1 MACRO PRESET/TUNE SEARCH MEMORY FM/XM AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM STEREO MY BEAM MY SUR.

  • Page 11: Controls And Functions

    Front panel AUX 3 INTELLIBEAM MIC 1 AUX 3 input jack Connect your portable audio player (see page 22). 2 INTELLIBEAM MIC jack Connect the supplied IntelliBeam microphone for AUTO SETUP (see page 30). 3 Remote control sensor Receives infrared signals from the remote control. 4 Front panel display Shows information about the operational status of this unit.

  • Page 12: Front Panel Display

    Controls and functions Front panel display 1 HDMI indicator Lights up when the signal of the selected input source is input at the HDMI IN jack(s). 2 TUNER indicators FM: Light up when this unit is receiving an FM broadcast (see pages 43 to 45).

  • Page 13: Rear Panel

    1 ANTENNA jack Connect the FM antenna (see page 23). 2 DOCK terminal Connect the Yamaha iPod universal dock (such as YDS- 10, sold separately) (see page 53). 3 AUX 1 AUDIO INPUT jacks Connect an external component via an analog connection (see page 20).

  • Page 14: Remote Control

    Controls and functions Remote control This section describes the functions of the remote control used to control this unit. Some buttons marked with an asterisk (*) share the common functions between the YSP and TV/AV operation modes (S). You can also control other components using the remote control once you set the appropriate remote control codes.
  • Page 15 F DVD player/VCR control buttons Control your DVD player or VCR (see pages 95 and 97). G My Beam microphone Collects the test tones from this unit when using the My Beam auto-adjust function (see page 63). H TV POWER Turns on or off the power of your TV (see page 95).
  • Page 16 Controls and functions This section describes the functions of the remote control used to control FM, XM Satellite Radio, or iPod when the TV/AV mode is selected with the operation mode selector (7). STANDBY/ON POWER POWER AUX1 AUX2 INPUT1 MACRO PRESET/TUNE SEARCH MEMORY...

  • Page 17: Installation

    This section describes a suitable installation location to install this unit using a metal wall bracket, a rack or a stand. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first.

  • Page 18: Installation Examples

    Installation ■ Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position as possible.

  • Page 19: Using A Metal Wall Bracket

    ■ Using a metal wall bracket You can use the optional metal wall bracket to mount this unit on the wall in your listening room. Metal wall bracket This unit YSP-3050 24- 7x22 SPM-K30 (Option) Refer to the instructions supplied with the metal bracket for details on how to attach the metal bracket to the wall or how to attach this unit to the metal bracket.

  • Page 20: Connections

    Connections This unit is equipped with the following types of audio/video input/output jacks/terminal: For audio input • 2 optical digital input jacks • 2 coaxial digital input jacks • 2 sets of analog input jacks • 1 universal dock terminal For video input •...

  • Page 21: Before Connecting Components

    Before connecting components ■ Cables used for connections Audio/Video HDMI cable Audio Audio pin cable (supplied) (White) (Red) Optical cable (supplied) Digital audio pin cable (supplied) (Orange) 3.5 mm stereo mini plug cable Subwoofer pin cable Video OSD video pin cable (supplied)/ Video pin cable (Yellow) Component video pin cable (Green)

  • Page 22: Case 1: Connections Using Hdmi Cables

    Connections Case 1: Connections using HDMI cables This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 19 to 21.

  • Page 23: Case 2: Connecting A Dvd Player/Recorder And Tuner (Digital Satellite, Cable Tv Or Digital Airwave)

    Case 2: Connecting a DVD player/recorder and tuner (digital satellite, cable TV or digital airwave) For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL INPUT jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO INPUT jacks on this unit in addition to the coaxial digital audio connection.

  • Page 24: Case 3: Connecting Other Connection Methods

    Connections Case 3: Connecting other connection methods If your component supports optical digital connections, connect the optical digital output jack on your component (e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL INPUT jack on this unit. If your component does not support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL DIGITAL INPUT jack on this unit.

  • Page 25: Connecting A Tv Without An Hdmi Cable

    Connecting a TV without an HDMI cable For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO INPUT jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL INPUT jack on this unit.

  • Page 26: Connecting A Portable Audio Player

    Connections Connecting a portable audio player Connect the analog audio output jack on your portable audio player to the AUX 3 input jack on the front panel of this unit. Front panel of this unit AUX 3 Analog audio output Portable audio player Audio 3.5 mm stereo mini plug cable...

  • Page 27: Connecting The Fm Antenna

    Connecting the FM antenna Connect the supplied FM antenna to the FM ANTENNA jack on this unit. FM indoor antenna (supplied) About the IR IN jack The IR IN jack does not support normal external component connection. This is a control expansion terminal for commercial use only.

  • Page 28: Getting Started

    GETTING STARTED Installing batteries in the remote control Press Press and hold the mark on the battery cover and then open the cover. Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Make sure you insert the batteries according to the polarity markings (+/–).

  • Page 29: Turning On This Unit Or Setting It To The Standby Mode

    Turning on this unit or setting it to the standby mode INPUT VOLUME STANDBY/ON STANDBY/ON POWER POWER DOCK AUX1 AUX2 AUX3 INPUT1 MACRO PRESET/TUNE SEARCH MEMORY FM/XM Press STANDBY/ON to turn on the power of this unit. The volume level appears in the front panel display, and the current input source and beam mode are displayed.

  • Page 30: Using Set Menu

    USING SET MENU Displaying the OSD (on-screen display) This section describes how to display the OSD (on-screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the comfort of your own home.

  • Page 31: The Flow Chart Of Set Menu

    The flow chart of SET MENU The following diagram illustrates the overall flow of the setup procedure. Run LANGUAGE SETUP. See “Changing OSD language” on page 28. Run AUTO SETUP (IntelliBeam). See “AUTO SETUP (IntelliBeam)” on page 29. Look for a remedy. See “Error messages for AUTO SETUP”...

  • Page 32: Changing Osd Language

    CHANGING OSD LANGUAGE This feature allows you to select the language of your choice that appears in SET MENU of this unit. Set the operation mode selector to YSP. TV/AV Press MENU. The SET MENU screen appears on your TV. SET MENU ;MEMORY ;AUTO SETUP...

  • Page 33: Auto Setup (Intellibeam)

    AUTO SETUP (IntelliBeam) This unit creates a sound field by reflecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.

  • Page 34: Installing The Intellibeam Microphone

    AUTO SETUP (IntelliBeam) Installing the IntelliBeam microphone The supplied IntelliBeam microphone collects and analyzes the sound that this unit produces in your actual listening environment. Follow the procedure below to connect the IntelliBeam microphone to this unit and make sure that the IntelliBeam microphone is placed in a proper location and that there are no large obstacles between the IntelliBeam microphone and the walls in your listening room.

  • Page 35: Using Auto Setup (Intellibeam)

    Center line IntelliBeam microphone ■ Assembling the supplied cardboard microphone stand You will find three separate parts (one circular part and two longitudinal parts) of the cardboard microphone stand originally put together. Disassemble the three parts of the cardboard microphone stand originally put together. Insert one of the longitudinal part into the crevice of the other longitudinal part.

  • Page 36: Press Menu

    AUTO SETUP (IntelliBeam) Notes • Make sure that your listening room is as quiet as possible while this unit is performing the AUTO SETUP procedure. • To achieve the best results possible, evacuate yourself from your listening room until the AUTO SETUP procedure is completed so that you may not obstruct the path of sound beams.
  • Page 37 Press to select BEAM+SOUND OPTIMZ, BEAM OPTIMZ only, or SOUND OPTIMZ only and then press ENTER. The following screen appears on your TV. ENTER AUTO SETUP PREPARATION & CHECK Please connect the MIC. Please place the MIC at least 1.8m/6ft away from the YSP unit.
  • Page 38 AUTO SETUP (IntelliBeam) Check that the following screen is displayed on your TV. The results of the AUTO SETUP procedure are displayed on your TV. Example 1 SHOW RESULT MEASUREMENT COMPLETE BEAM MODE :5 BEAM SUBWOOFER :NOT APPLICABLE [ENTER]:Save set-up. [RETURN]:Do not save set-up.

  • Page 39: Error Messages For Auto Setup

    If the problem persists, contact the nearest authorized Yamaha service center for assistance. An internal system error occurred. Repeat the AUTO SETUP procedure.

  • Page 40: Using The System Memory

    USING THE SYSTEM MEMORY Convenient usage of the system memory You can save the current settings adjusted in SET MENU in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment.

  • Page 41: Loading Settings

    Press to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. The following screen appears on your TV. ENTER ENTER 2)MEMORY SAVE MEMORY1 Save Now ? Push [ENTER] to Save Press ENTER again. The new parameters are saved as MEMORY1, MEMORY2, or MEMORY3. Once the parameters are saved, the display returns to the SET MENU screen.
  • Page 42 Using the system memory Press to select LOAD and press ENTER. The following screen appears on your TV. ENTER 1)MEMORY LOAD MEMORY1 MEMORY2 MEMORY3 [ ]/[ ]:Select [ENTER]:Enter Press to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. The following screen appears on your TV. ENTER 1)MEMORY LOAD MEMORY1 Load Now ?

  • Page 43: Playback

    Selecting the input source You can play back sound from the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one of the input selector buttons (TV/STB, DVD, AUX1, AUX2, AUX3, XM, or FM) on the remote control.

  • Page 44: Playing Back Sources

    Playback Press FM/XM to listening to FM (see “FM tuning” on page 42) or XM Satellite Radio (see “XM™ Satellite Radio tuning” on page 47). FM/XM Press AUX1 (or AUX2) to play back a component connected to the AUX 1 (or AUX 2) jack on the rear panel of this unit.

  • Page 45: Adjusting The Volume

    Adjusting the volume INPUT VOLUME STANDBY/ON VOLUME TV VOL MUTE TV INPUT TV MUTE Press VOLUME +/– to increase or decrease the volume level. The numeric value of the volume level appears in the front panel display. Control range: MIN (minimum), 01 to 99, MAX (maximum) VOLUME Front panel...

  • Page 46: Fm Tuning

    FM TUNING There are two tuning methods: automatic and manual. Automatic tuning is effective when the radio signal is strong and there is no interference. If the radio signal is weak, tune into the FM station manually. You can also use the automatic and manual preset tuning features to store up to 40 stations in total (A1 to E8: 5 preset station groups with 8 preset station numbers each).

  • Page 47: Automatic Tuning

    Automatic tuning Automatic tuning is effective when the radio station signals are strong and there is no interference. Set the operation mode selector to TV/AV. TV/AV Press FM/XM repeatedly to select FM as the input source. “FM” appears in the front panel display. FM/XM •...

  • Page 48: Automatic Preset Tuning

    FM tuning Press SEARCH repeatedly until the AUTO indicator disappears from the front panel display. SEARCH No colon (:) If a colon (:) appears in the front panel display, tuning is not available. Press PRESET/TUNE to turn the colon (:) off. Press ENTRY ) to tune into the desired station manually.

  • Page 49: Manual Preset Tuning

    Manual preset tuning You can also store up to 40 stations (A1 to E8: 5 preset station groups with 8 preset station numbers each) manually. Set the operation mode selector to TV/AV. TV/AV Tune into the desired FM station. See page 43 for tuning instructions. Press MEMORY.

  • Page 50: Selecting A Preset Station

    FM tuning Selecting a preset station You can tune into the preset stations simply by selecting the preset station groups and numbers. Set the operation mode selector to TV/AV. TV/AV Press FM/XM repeatedly to select FM as the input source. “FM”...

  • Page 51: Xm™ Satellite Radio Tuning

    XM™ Satellite Radio tuning ■ About XM Satellite Radio XM Satellite Radio offers an extraordinary variety of commercial-free music, plus the best in sports, news, talk, and entertainment. XM is broadcast in superior digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan.

  • Page 52: Activating Xm™ Satellite Radio

    XM™ Satellite Radio tuning Activating XM™ Satellite Radio Once you have installed XM Mini-Tuner Home Dock, inserted XM Mini-Tuner, connected Home Dock to your XM READY home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming.
  • Page 53 Search for a desired channel by using one of the four XM Satellite Radio search modes: • To select a channel from all channels, see “All Channel Search mode” on this page. • To select a channel by channel category, see “Category Search mode”...
  • Page 54 XM™ Satellite Radio tuning ■ Preset Search mode Prior to selecting a preset channel in the Preset Search mode, you must preset the XM channels. For details, see “Presetting the XM™ Satellite Radio channels” on page 51. Press SEARCH repeatedly to select “PRESET SEARCH”.

  • Page 55: Presetting The Xm™ Satellite Radio Channels

    Presetting the XM™ Satellite Radio channels You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 5 preset channel groups with 8 preset channel numbers each). You can then recall the preset channels easily by selecting the preset group and number as described in “Preset Search mode”...

  • Page 56: Displaying The Xm™ Satellite Radio Information

    XM™ Satellite Radio tuning Displaying the XM™ Satellite Radio information You can display the XM Satellite Radio information (channel number/channel name, channel category, and artist name/song or program title) for the currently selected channel in the front panel display or in the OSD. Note If a status or error message appears in the front panel display or in the OSD, see the “XM Satellite Radio”...

  • Page 57: Using Ipod

    This unit has the DOCK terminal on the rear panel that allows you to connect the Yamaha iPod universal dock (such as YDS-10, sold separately). Station your iPod in the Yamaha iPod universal dock, and use the supplied remote control to operate your iPod.
  • Page 58 • For a complete list of status messages that appear in the front panel display and in the OSD, see the “iPod” section in “Troubleshooting” on page 100. • While your iPod is stationed in the Yamaha iPod universal dock connected to the DOCK terminal of this unit, your iPod battery is automatically charged as long as this unit is turned on.
  • Page 59 • You can view the photos or video crips stored on your iPod in the OSD (some models only). Notes • The YAMAHA logo appears in the iPod screen in this mode. • Undisplayable characters are shown as underscores “_” in the front panel display and OSD.

  • Page 60: Enjoying Surround Sound

    ENJOYING SURROUND SOUND You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. Notes • When ANGLE TO WALL OR CORNER is set in MANUAL SETUP (see page 76), 5 Beam and 3 Beam cannot be selected. •...

  • Page 61: Stereo Plus 3 Beam

    Stereo plus 3 Beam Outputs normal sound from the front left and right channels and sound beams from the center and surround left and right channels. This mode is ideal for watching live recordings on a DVD. Vocals and instrumental sounds can be heard close to the center of the listening position while sound reflections from the venue itself can be heard on your right and left, giving you the feeling that you are...
  • Page 62 Enjoying surround sound ■ Decoder indicators Depending on the input source and the selected surround mode, the decoder indicators in the front panel display light up as follows: Status When PCM signals are being input When DTS digital signals are being input When DTS Neo:6 is selected as the surround mode...

  • Page 63: Enjoying 2-Channel Sources In Surround Sound

    Enjoying 2-channel sources in surround sound This unit can decode 2-channel sources for 5.1-channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode. The surround modes are available only when the CINEMA DSP programs are turned off (see page 67) or when the movie program is selected as the CINEMA DSP program (see page 66).

  • Page 64: Enjoying Tv In Surround Sound

    Enjoying surround sound Enjoying TV in surround sound You can enjoy analog audio signals output from your TV in real surround sound. Before performing the steps below, set the volume of this unit to 30. If necessary, adjust the volume level in step 5 below. INPUT1 MACRO PRESET/TUNE...

  • Page 65: Adjusting Surround Mode Parameters

    Adjusting surround mode parameters You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. MUSIC MOVIE SPORTS SUR. DECODE ENHANCER ENTRY MENU TV/AV CAT/ ENTER DISPLAY RETURN Repeat steps 1 and 2 in “Enjoying 2-channel sources in surround sound”...

  • Page 66: Enjoying Stereo Sound

    ENJOYING STEREO SOUND You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control. Notes • When you play back Dolby Digital audio signals in the 2-channel or 5-channel stereo playback, the dynamic range becomes compressed.

  • Page 67: Playing Back Sound Clearly (My Beam)

    Playing back sound clearly (My Beam) You can improve listenability in a noisy environment by changing the beam mode to My Beam, which outputs sound beams directly toward the listening position in a single channel. In addition, My Beam is also ideal when you do not want the sound beams to be reflected on the walls in your listening room or when you do not want to disturb other people while enjoying music or movies at night.

  • Page 68: Using Manual-Adjust Function

    Playing back sound clearly (My Beam) Using manual-adjust function You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. Set the operation mode selector to YSP.

  • Page 69: Using Sound Field Programs

    The acoustics in your room could be changed to those of a concert hall, a dance floor, or a listening room of virtually any size at all. This ability to create sound fields at will is exactly what Yamaha has done with...

  • Page 70: Cinema Dsp Programs

    Using sound field programs CINEMA DSP programs You can select from three different CINEMA DSP programs (MUSIC, MOVIE, and SPORTS) depending on the type of source you want to enjoy. The CINEMA DSP indicator lights up in the front panel display when one of the CINEMA DSP programs is selected.

  • Page 71: Turning Off Cinema Dsp Programs

    ■ Turning off CINEMA DSP programs Turn off the CINEMA DSP programs if you want to enjoy the original sound without the CINEMA DSP program effect. Set the operation mode selector to YSP. TV/AV Press OFF to turn off the CINEMA DSP programs.

  • Page 72: Using The Music Enhancer

    USING THE MUSIC ENHANCER You can use the Music Enhancer of this unit to improve the sound nearest to the original depth and width of compression artifacts such as the MP3 format. MUSIC MOVIE SPORTS SUR. DECODE ENHANCER MENU ENTRY TV/AV CAT/ ENTER...

  • Page 73: Using The Volume Mode (Night Listening Enhancer/Tv Volume Equal Mode)

    (Night listening enhancer/TV volume equal mode) The night listening enhancers are designed to improve listenability at lower volumes or at night. In addition, you can limit the volume level of the TV so that it will not vary suddenly to a great extent whenever the contents being broadcast change (i.e.

  • Page 74: Using The Sleep Timer

    USING THE SLEEP TIMER Use this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playing back a source. PRESET/TUNE SEARCH MEMORY...

  • Page 75: Canceling The Sleep Timer

    ■ Canceling the sleep timer Set the operation mode selector to YSP. TV/AV Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display. SLEEP Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator disappears from the front panel display, indicating that the sleep timer is deactivated.

  • Page 76: Displaying The Input Source Information

    DISPLAYING THE INPUT SOURCE INFORMATION Displaying the input source information You can display the format and sampling frequency of the current input signal in the front panel display. SUR. DECODE ENHANCER ENTRY MENU CAT/ ENTER DISPLAY RETURN VOLUME TV VOL MUTE TV INPUT TV MUTE...

  • Page 77: Using The Hdmi Control Feature

    Using the HDMI control feature You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI control-compatible TV (except some models) are connected via HDMI. • Turning on or off the power (synchronized operation with the TV) •...

  • Page 78: Manual Setup

    MANUAL SETUP To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for sound signals, sound beams, digital input, and the OSD. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment. •...

  • Page 79: Using Manual Setup

    Using MANUAL SETUP Use the remote control to access and adjust each parameter. MUSIC MOVIE SPORTS SUR. DECODE ENHANCER ENTRY MENU TV/AV CAT/ ENTER DISPLAY RETURN VOLUME TV VOL You can adjust the SET MENU parameters while the unit is reproducing sound.

  • Page 80: Beam Menu

    MANUAL SETUP BEAM MENU Use to manually adjust the various parameters related to the sound beam output. SET MENU → MANUAL SETUP → BEAM MENU 2)BEAM MENU A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION [ ]/[ ]:Up/Down [ENTER]:Enter You can adjust the sound beam output level of each channel in “Adjusting the audio balance”...
  • Page 81 • Select ANGLE TO WALL OR CORNER if this unit is installed in the corner of your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit. Listening position from the unit Room width...
  • Page 82 MANUAL SETUP BEAM TRAVEL LENGTH (Beam travel length) A certain amount of delay must be applied to the sound from each channel so that all sounds can arrive at the listening position at the same time. This menu sets the distance that sound beams travel after being output and reflected off the wall until they arrive at the listening position and adjusts the delay applied to the respective...
  • Page 83 TREBLE GAIN (Treble gain) Use to adjust the high-frequency output level of each channel. If the reflection points of the front left and right or surround left and right sound beams are on curtain or other acoustically absorbent surfaces, you can achieve more effective surround sound by increasing the treble level for those sound beams.

  • Page 84: Sound Menu

    MANUAL SETUP SOUND MENU Use to manually adjust the various parameters related to the sound output. SET MENU → MANUAL SETUP → SOUND MENU 1)SOUND MENU A)TONE CONTROL B)SUBWOOFER SET C)MUTE LEVEL D)AUDIO DELAY E)ROOM EQ F)DD/DTS Dynamic Range G)TruBass [ ]/[ ]:Up/Down [ENTER]:Enter ■...
  • Page 85 ■ AUDIO DELAY (Audio delay) Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors. Choices: 0 to 160 msec D)AUDIO DELAY AUDIO DELAY;;;;;0msec [ ]/[ ]:Select [ENTER]:Return ■...

  • Page 86: Input Menu

    MANUAL SETUP INPUT MENU Use to manually adjust the various parameters related to the audio and video input. SET MENU → MANUAL SETUP → INPUT MENU 3)INPUT MENU A)INPUT ASSIGNMENT B)INPUT MODE C)INPUT TRIM D)INPUT RENAME E)HDMI SET F)XM ANTENNA LEVEL [ ]/[ ]:Up/Down [ENTER]:Enter ■...
  • Page 87 ■ INPUT TRIM (Input trim) Use to adjust the input level of the input source. C)INPUT TRIM 1/2 TV/STB ANALOG;;;-3.0dB DIGITAL;;-3.0dB DIGITAL;;-3.0dB [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return • Select TV/STB ANALOG to adjust the level of audio and video signals input at the TV/STB AUDIO INPUT jacks of this unit.
  • Page 88 MANUAL SETUP ■ HDMI SET (HDMI settings) Use to change the HDMI audio/video output/input to match the connected component. Choices: SUPPORT AUDIO (Support audio), AUDIO SELECT (Audio select), VIDEO INFO (Video information), UP-SCALING (HDMI up-scaling), ASPECT RATIO (HDMI aspect ratio), HDMI CONTROL (HDMI control) E)HDMI SET a)SUPPORT AUDIO...
  • Page 89 • Select OFF to deactivate the HDMI up-conversion feature • Select THROUGH not to up-scale any analog video signals. • Select 480p (or 576p), 1080i, or 720p to up-scale analog video signals to 480p (or 576p), 1080i, or 720p of resolution. Notes •...

  • Page 90: Display Menu

    MANUAL SETUP DISPLAY MENU Use to manually adjust the various parameters related to the display. SET MENU → MANUAL SETUP → DISPLAY MENU 4)DISPLAY MENU A)F.DISPLAY SET B)OSD SET C)UNIT SET [ ]/[ ]:Up/Down [ENTER]:Enter ■ F.DISPLAY SET (Front panel display settings) Use to adjust the brightness and display settings of the front panel display.

  • Page 91: Adjusting The Audio Balance

    Adjusting the audio balance You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience. Using the test tone You can use the test tone feature to output a test tone from each channel to manually balance the channel levels.

  • Page 92: Using The Audio Output Being Played Back

    Adjusting the audio balance Press TEST when you have completed all your adjustments. TEST Notes • All channel levels cannot be adjusted when the 2-channel or 5- channel stereo playback (see page 62), My Beam (see page 63), or My Surround (see page 57) is selected as the beam mode. •...
  • Page 93 Press to adjust the channel volume. ENTER Control range: –10.0 dB to +10.0 dB Wait for a few seconds without operating this unit when you have completed your adjustment. Notes • All channel levels cannot be adjusted when the 2-channel or 5- channel stereo playback (see page 62), or My Surround (see page 57) is selected as the beam mode.

  • Page 94: Selecting The Input Mode

    Selecting the input mode You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, AUX1, and AUX2. We recommend setting the input mode to AUTO in most cases. DOCK AUX1 AUX2...

  • Page 95: Adjusting The System Parameters

    Adjusting the system parameters This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to adjust and customize the way this unit operates. Note When “F.PANEL KEY” is set to “F.PANEL: OFF” (see page 92), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON on the remote control instead to adjust the system parameters.

  • Page 96: Demo Mode

    Adjusting the system parameters Parameter to be changed and front panel display MEMORY PROTECT You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed. MAX VOLUME You can set the maximum volume level so that this unit will not output sound beyond the limited volume level.
  • Page 97 Parameter to be changed and front panel display FACTORY PRESET You can reset all of the parameters of this unit to the factory presets. This procedure completely resets ALL the parameters in SET MENU. Note After performing the following procedure you must run sound environment.

  • Page 98: Remote Control Features

    Remote control features In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other manufacturers. To control other components, you must set up the remote control with the appropriate remote control codes and set the operation mode selector to TV/AV to change the control area.

  • Page 99: Controlling Other Components

    Controlling other components ■ Operating your TV Set the operation mode selector to TV/AV, and press TV to select TV as the input source. The control area of the remote control changes to the TV operation mode. TV/AV STANDBY/ON POWER POWER DOCK AUX1...
  • Page 100 Remote control features ■ Operating your DVD player/recorder Set the operation mode selector to TV/AV and press DVD to select DVD as the input source. The control area of the remote control changes to the DVD operation mode. TV/AV STANDBY/ON POWER POWER DOCK...
  • Page 101 ■ Operating your VCR Set the operation mode selector to TV/AV and press AUX1 to select VCR as the input source. The control area of the remote control changes to the AUX1 operation mode. This operation is available when your VCR is connected to the AUX1 AUDIO INPUT jacks on this unit.

  • Page 102: Using The Tv Macro

    Remote control features Using the TV macro The TV macro feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a DVD, you would normally turn on the component, select DVD as the input source, and press the play button to start playback.
  • Page 103 ■ Setting macros for the TV without the tuning capability Press and hold CODE SET and press one of the input selector buttons to select the input source you want to set macros for. Proceed to step 2 while holding down CODE SET. TV MUTE While holding down, press...

  • Page 104: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. ■ General...
  • Page 105 Problem No sound from the BASS OUT in SUBWOOFER SET is set to subwoofer. FRONT. The source does not contain low bass signals. Distorted or too little bass CROSS OVER in SUBWOOFER SET is set sound. incorrectly. One of the night listening enhancers is currently selected.
  • Page 106 Troubleshooting ■ Remote control Problem The remote control does not Wrong distance or angle. work and/or function properly. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. Cannot operate external The external component you want to operate components with the remote...
  • Page 107 Select another channel category by pressing CAT/A-E repeatedly. Cause Turn off this unit and reconnect the Yamaha iPod universal dock to the DOCK terminal of this unit. Try resetting your iPod. Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.

  • Page 108: Glossary

    Glossary ■ Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (left, center, and right) and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (low-frequency effect), the system has a total of 5.1-channels (LFE is counted as 0.1-channel).

  • Page 109: Lfe 0.1-Channel

    Glossary ■ LFE 0.1-channel This channel is for the reproduction of low bass signals. The frequency range for this channel is 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduction by the other 5/6 channels in Dolby Digital or DTS 5.1/6.1-channel systems.

  • Page 110: Index

    Index ■ Numerics 3 Beam... 57 5 Beam... 56 ■ A AC power supply cable... 23 Audio pin cable... 17 AUTO SETUP (IntelliBeam) ... 29 ■ B Battery ... 24 BEAM MENU... 76 Beam mode... 56, 62, 63 ■ C Cable clamp ...

  • Page 111: Specifications

    AMP SECTION • Maximum Output Power ... 2 W (1 kHz, 10% THD, 4 Ω) × 21 20 W (100 Hz, 10% THD, 4 Ω) × 2 SPEAKER SECTION • Driver Small dia. speakers ... 4 cm (1-9/16 in) cone magnetic shielding type × 21 Woofers ...

  • Page 112: List Of Remote Control Codes

    DUAL THOMSON DWIN 293, 281 TOSHIBA EMERSON 297, 224, 239, 232 VIDECH FURGUSON 223, 265, 266 WARDS FIRST LINE YAMAHA FISHER 295, 233 FRABA YAMAJI FUJITSU ZENITH FUNAI 277, 278 293, 297, 234, DVD PLAYER 235, 236 GOODMANS 296, 298, 223...
  • Page 113 744, 792, 793 SCIENTIFIC ATLANTA 752, 753, 754, 789 SONY 756, 757 TOCOM UNIVERSAL 769, 772, 773, 774, 775 VIEWSTAR 764, 766, 776, 777, 778, 779, 782 SATELLITE TUNER ECHOSTAR 837, 838, 839 GENERAL INSTRUMENT HITACHI HUGHES 843, 844, 845, 846 MAGNAVOX PANASONIC 826, 829...
  • Page 116 YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY. LTD. LEVEL 1, 99 QUEENSBRIDGE STREET, SOUTHBANK, VIC 3006, AUSTRALIA...
  • Page 117 Supplied accessories used for connections and operations in this guide Audio pin cable (x1) OSD* video pin cable (x1) Optical cable (x1) YSP-3050 Coaxial cable (x1) Digital audio pin cable (x1) IntelliBeam microphone (x1) Cardboard microphone stand (x1) Demonstration DVD (x1) QUICK REFERENCE GUIDE *OSD: On-Screen Display This quick reference guide explains steps to connect a TV and a DVD player/recorder to this unit and achieve...
  • Page 118 Continued from the front Carry out the AUTO SETUP (IntelliBeam) Carry out the AUTO SETUP to adjust the settings that best match your listening environment. The IntelliBeam technology allows you to achieve sound adjustments that best match your listening environment. It is normal for loud test tones to be output during the AUTO SETUP procedure.

This manual is also suitable for:

Ysp-3050bl

Table of Contents