Using The Panel Edit Matrix - Yamaha AN1x Owner's Manual

Using The Panel
Edit Matrix
The AN1x's panel matrix of Edit menus gives
you quick and easy access to hundreds of
parameter settings. All you have to do is set the
[EDIT ROTARY] switch to one of the six menus
and press the parameter value [UP/DOWN]
switch located beneath the name of the
parameter you want to edit.
Select a menu (1 - 6)
Mode Ctrl Matrix
Port
Poly LFO Rst Set No Param
Vari EF/EQ Vari EF
Tempo Split Pnt Param Data Dry:Wet
Track Common Track
Trigger LoopType Length Key Track Track No
Common
Arp /SEQ Type/No KbdMode Hold SceneSw
Knob Pattern
Event 1-8 / 9 -16 Step Hold Bank No
System MIDI
Mstr Tune Kbd Trans Kbd Vel Tx Ch Rx Ch
Press this area to increment settings (hold to scroll)
Press this area to decrement settings (hold to scroll)
Press once to display information in LCD
Press the [UP/DOWN] switch once to display the name of
the parameter and current value setting in the LCD. Press
the upper or lower area of the switch repeatedly to
increment or decrement through the settings, or hold the
upper or lower area of the switch to scroll through the
settings.
VOICE
Layer Unison
Depth Separate SCENE SETUP
Source Pan Detune
VOICE
Dly/Rev EF EF Name
COMMON
Param Data Bypass Cursor Char
Track Job VOICE
Param Scene Sw Rec Copy Undo FREE EG
VOICE
MIDI Arpeggio Play EF
Ptn Tx Ch Subdivide Swing Velocity GateTime ARPEGGIO /SEQ
SEQ
SEQ
EDIT /SETUP
Base Unit Length LoopType Ctrl No Store
Ctrl UTILITY
DeviceNo Local BulkDump Device Ctrl No SETUP
Mode Ctrl Matrix
Poly Port LFO Rst Set No
Vari EF/ EQ
Tempo Split Pnt Param Data
Track Common
Trigger LoopType Length Key Track
Common
Arp /SEQ Type/No KbdMode Hold
Knob Pattern
Event 1-8 / 9 -16 Step Hold Bank
System MIDI
Mstr Tune Kbd Trans Kbd Vel Tx Ch
2 Step Sequencer Menu
1 Voice Menus
The four Voice menus are primarily dedicated to parameters
which affect the tone generator.
VOICE SCENE SETUP Includes Scene Mode and Control
Matrix parameters plus Layer-related parameters for the
voice.
VOICE COMMON Includes Tempo, Split Point, Effect and
voice naming parameters which are common to both Scenes,
and Variation Effect Dry:Wet balance parameter which can
be set for each Scene.
VOICE FREE EG Includes Trigger and Length setting, Track
and Parameter select, plus recording and other parameters
related to the Free EG function.
VOICE ARPEGGIO/SEQ Includes common and specific
parameters related to the Arpeggiator and Step Sequencer.
For a description of each parameter and available settings, see the REFERENCE
section, page 72. For information about the Arpeggiator, see page 33.
2 Step Sequencer Menu
The SEQ EDIT/SETUP menu includes Knob event and
sequence editing-related parameters, as well as Pattern Bank
and Number select, and other parameters related to the Step
Sequencer.
For a description of each parameter and available settings, see the REFERENCE
section, page 89. For information about the Step Sequencer, see page 37.
3 Utility Menu
The UTILITY SETUP menu includes "global" parameters,
including System tuning and keyboard transpose and velocity
parameters, MIDI channel transmit, receive and other
settings, and Control function assignment-related parameters.
For a description of each parameter and available settings, see the REFERENCE
section, page 92. For more information about the Control function, see page
50.
28
Layer Unison VOICE
SCENE SETUP
Param Source Depth Pan Separate Detune
VOICE
Vari EF Dly/ Rev EF EF Name
Dry:Wet Param Data Bypass Cursor Char COMMON
Track Track Job VOICE
FREE EG
Track No Param Scene Sw Rec Copy Undo
VOICE
MIDI Arpeggio Play EF
SceneSw Ptn Tx Ch Subdivide Swing Velocity GateTime ARPEGGIO /SEQ
SEQ SEQ
EDIT / SETUP
No Base Unit Length LoopType Ctrl No Store
UTILITY
Ctrl
Rx Ch DeviceNo Local BulkDump Device Ctrl No SETUP
3 Utility Menu
1 Voice Menus