Siemens SITOP UPS1600 Manual page 120

Engineering and remote access
3.6 Web server
● Log off automatically after 15 minutes
Define whether a user should be automatically logged off after closing the web server.
● Update interval
Define the interval in which the actual values are sent to the web server.
Procedure for changing the administrator password
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Communication interface > Web server".
3. Select entry "Settings".
4. Make the required settings and carry out the appropriate actions in the editor area.
5. Load the data to the device.
User administration
Here, you can change the administrator password and set up the system so that guests can
access the system - and up to 14 additional user accounts with different authorization levels.
Procedure for changing the administrator password
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Communication interface > Web server".
3. Select entry "User administration".
4. In the editor area, under "Administrator" enter the current administrator password.
5. In the editor area, under "Password" enter a new password.
6. Repeat the new password.
7. Load the data to the device.
Procedure for setting up a guest access
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Communication interface > Web server".
3. Select entry "User administration".
4. In the editor area under "Add new user" enter the password and select the individual
access rights for a new user.
120
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76