5
Cable Installation
Preparing Terminals
5.1
Preparing DT
Terminals
Preparing OT
Terminals
Preparing Cord
End Terminals
Connecting Cables
5.2
Connection Method
NOTICE
1. Ensure that all circuit breakers, including upstream output circuit breakers, are switched to OFF
before connecting cables.
2. DT and OT terminals must be coated with a heat shrink tubing.
3. After cables are connected, seal the cable inlet and outlet holes using firestop putty.
6
(1) Cable
(2) Heat shrink tubing
(3) DT terminal
(4) Electric hydraulic pliers
(5) Heat gun
(1) Cable
(2) Heat shrink tubing
(3) OT terminal
(4) Electric hydraulic pliers
(5) Heat gun
(1) Cable
(2) Cord end terminal
(3) Crimping tool