Hitachi HIDIC EH-150 Applications Manual page 2

WARNING
To ensure that the equipment described by this manual. As well as all equipment connected to and used with it,
operate satisfactorily and safely, all applicable local and national codes that apply to installing and operating the
equipment must be followed. Since codes can vary geographically and can change with time, it is the user's
responsibility to determine which standard and codes apply, and to comply with them.
FAILURE TO COMPLY WITH APPLICABLE CODES AND STANDARDS CAN RESULT IN DAMAGE TO
EQUIPMENT AND OR SERIOUS INJURY TO PERSONNEL.
INSTALL EMERGENCY POWER STOP SWITCH WHICH OPERATES INDEPENDENTLY OF THE
PROGRAMMABLE CONTROLLER TO PROTECT THE EQUIPMENT AND OR PERSONNEL IN CASE OF
THE CONTROLLER MALFUNCTION.
Personnel who are to install and operate the equipment should carefully study this manual and any others referred
to by it prior to installation and / or operation of the equipment. Hitachi, Ltd. constantly strives to improve its
products, and the equipment and the manual(s) that describe it may be different from those already in your
possession.
If you have any questions regarding the installation and operation of the equipment, or if more information is
desired, contact your local Authorized Distributor or Hitachi, Ltd.
IMPORTANT
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF
NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE
INTERFERENCE TO RADIO COMMUNICATIONS. AS TEMPORARILY PERMITTED BY REGULATION,
IT HAS NOT BEEN TESTED FOR COMPLIANCE WITH THE LIMITS FOR CLASS A COMPUTING
DEVICES PURSUANT TO SUBPART J OF PART 15 OF FCC RULES, WHICH ARE DESIGNED TO
PROVIDE REASONABLE PROTECTION AGAINST SUCH INTERFERENCE.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE INTERFERENCE
IN WHICH CASE THE USER, AT HIS OWN EXPENSE, WILL BE REQUIRED TO TAKE WHATEVER
MEASURES MAY BE REQUIRED TO CORRECT THE INTERFERENCE.