9-30
Command Diagnostic Messages
C0125 Error when reading encoder data => optional encoder
Cause
Measuring system cable defective
Measuring system defective
Encoder interface card defective
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Supported by Firmware Variant:
During
the
transition
communication phase 3 (C0100) an error during the reading of the
encoder data from the data memory of the optional encoder was
detected.
Note:
Measuring systems with their own data memory are DSF/HSF
and resolvers, as well as measuring systems with EnDat
interface (Heidenhain company) and HIPERFACE interface
(Stegmann company).
Remedy
Check measuring system cable
Replace measuring system
Replace encoder interface card
C0125 - Attributes
Display:
C0125
Mess. no.:
C0125 (hex)
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
check
from
communication
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
Rexroth IndraDrive
phase 2
to