Siemens iQ700 Installation Manual page 13

Information:
For some appliances the step-by-step mode is also
called "SAP mode" or "manual mode".
If the step-by-step mode does not work please
check:
- Your appliance is in the range of the Wi-Fi network.
- Your smartphone/tablet is connected to your
home Wi-Fi network.
- Your smartphone/tablet and appliance are
connected to the same home Wi-Fi network.
Step 3: Connecting the extractor hood to
the Home Connect app
Follow the instructions in Step 3 only if the app tells you to.
The following steps set out how to perform this operation
on the appliance itself.
4 | Press and hold the b symbol on your extractor hood until the
and indicators start to flash.
„
D
1
5 | Follow the instructions in the app.
D D
stops flashing on the display's control panel. The login
D
process is now complete.
Information:
If the connection could not be established make
sure your smartphone/tablet is within range of your
Wi-Fi network.
13 EN