Advertisement
NOTE:
Expansion Adapter
with 2 PMC Cards Installed
Front Bezel Screws (2)
Figure 3
10
Procedure
9 If you are using both the PMC bridge and expansion adapters, connect
them together, making sure that the connector and bezels are properly
aligned, as shown in Figure 3. Ensure that the interboard connector seats
properly by applying pressure to the top of the expansion board and to the
bottom of the bridge board at the interboard connector. There are two
screws that secure the front bezel and four screws to secure the backplane
connectors.
If the interboard connector is not tightly seated, PMC cards on the expansion
adapter will not operate.
Installing the Expansion Adapter onto the Bridge Adapter
Connector Screws (4)
Bridge Adapter
Interboard
Connector
Advertisement
