Optional) Connecting Cables To The Ups - Huawei STS-6000K-H1 Installation Manual

STS-6000K-H1 Smart Transformer Station (Vietnam,
Duc Long Gai Lai)
Installation Guide
Figure 7-18 Connecting an RS485 communications cable
Step 5 Connect a single-phase AC power cable. Insulate the unused cable terminals and bind them in
the cable holder.
Figure 7-19 Connecting a single-phase AC power cable
Step 6 Use firestop putty to seal the cable hole in the container.
----End

7.7 (Optional) Connecting Cables to the UPS

You have obtained the UPS and its auxiliary materials. Check that the quantity and model of
the following materials are correct based on the packing list.
Issue 02 (2020-02-21) Copyright © Huawei Technologies Co., Ltd.
7 Connecting Cables
57