Download Print this page

Huawei ACBox2000-21-D-A User Manual page 30

Table of Contents

ACBox2000-21-D-A

User Manual (Pan-Europe Edition)

Procedure

Step 1 Remove an appropriate length of the insulation layer from the ground cable using a wire

stripper.

Figure 5-4 Peeling a cable

Step 2 Insert the exposed core wire into the crimping area of the OT terminal and crimp it using

hydraulic pliers.

Step 3 Remove the locking cap from the GND waterproof cable connector (waterproof connector for

short) at the bottom of the ACBox2000 and remove the plug from the locking cap.

Step 4 Route the ground cable into the locking cap and then the GND waterproof connector.

Step 5 Remove the bolt at the ground point.

Step 6 Use the bolt to secure the ground cable crimped with the OT terminal and tighten the bolt to a

torque of 8 N· m using a socket wrench.

Issue 01 (2016-12-15)

Huawei Proprietary and Confidential

5 Electrical Connections

Table of Contents