Siemens Synco 700 Series Basic Documentation page 9

S-mode
Group addresses
Data points
Abbreviations
Building Technologies
HVAC Products
S-mode is characterized by the assignment of (logical) group addresses to
individual data points to create the communications bindings for the exchange of
process values. Devices bearing the same group address exchange process
values with each other.
The group addresses can be assigned to the group objects (S-mode data points)
with the ETS engineering and commissioning tool (ETS = Engineering Tool
Software).
For the various HVAC, lighting and security equipment and for integration into
higher-level building automation and control systems, selected data points of the
Synco devices can also communicate in S-mode.
"Data points" are also referred to as "communication objects".
Description
Ac Area coupler (see section 1.4)
DPSU Decentral Power Supply Unit (see section 2.2.1)
E-Mode Easy-Mode, LTE-mode is one of several "Easy Modes"
ETS Engineering Tool Software
HVAC Heating, Ventilation and Air Conditioning
IP Internet Protocol
Lc Line coupler (see section 1.4)
LTE-Mode Logical Tag Extended Mode, the Easy Mode used by Synco
KNX Communications standard (wired) TP1 (Twisted Pair)
PSU Power supply unit, (see section 2.2.3)
S-mode System mode, configuration / commissioning with ETS only
TP1 Twisted Pair 1, data transfer medium: bus
Basic documentation: Communication via the KNX bus
KNX (Konnex) and Synco
9/120
CE1P3127en
30.08.2007