Advertisement
Data via Bluetooth:
Please be aware of the fact that only a text based interface showing raw data is available at
the moment. Please check
smart phone apps coming soon.
1. Please go to App Store (iPhone)/ Google Play (Android) and install DSPS (Dialog
Serial Port Service) application from "JUMA Technology".
iPhone(https://itunes.apple.com/us/app/dsps/id953430079?mt=8
Android
(https://play.google.com/store/apps/details?id=com.dialog_semiconductor.dsps
2. Turn Bluetooth 'ON' on the Android/Apple device and open DSPS
3. Search /scan for the device.
4. When detected the blue LED on the Grid-EYE board lights up.
5. The device will be detected on the application – select Grid-EYE device to see data
come through.
Use as Arduino Shield:
As the Grid-EYE and the Bluetooth Module are working with 3.3V, only Arduino Boards with
3.3V supply voltage are supported (e.g. Arduino Due)
1. Open
www.eu.industrial.panasonic.com/grideye-evalkit
Arduino board.
2. Plug-in the Grid-EYE Sensor board to a 3.3V Arduino mother board.
3. Remove Jumpers J7, J9, J10 and J12 at the Grid-EYE board.
4. Connect USB interfaces and power-up the Arduino and GridEYE boards.
5. Open Device Manager to check the COM port.
6. Open LabVIEW application with appropriate COM port for the GridEYE board.
8. Click 'Open COM' to view the data. Temperature values can be observed on the
LabVIEW (8 x 8) matrix window. Colours for the heat map can be set between -20°C
and +100°C. The second tab is showing an interpolation of the raw signal.
7. Open the DSPS application and view sensor data via Bluetooth.
Panasonic Automotive & Industrial Systems Europe GmbH
www.eu.industrial.panasonic.com/grideye-evalkit
for updates and
and download software for
)
3
Quick Start Guide
Advertisement
