Huawei ECC800-Pro User Manual page 343

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Context
Figure 8-34 Network diagram
Procedure
Step 1 Set communications parameters on the device.
Table 8-48 Description of communications parameters to be set on a device
Parameter
Baud rate
Communications
address
Step 2 Add the device to the ECC800-Pro WebUI.
1.
2.
Issue 02 (2020-09-07)
Log in to the ECC800-Pro WebUI as an administrator.
Add the device.
Table 8-49 Parameter description for adding a device
Path Parameter
Choose Device
System attribute
Settings >
Device Type
Device
Management
and click Add
Connect To
Device. The
parameters
for adding
Copyright © Huawei Technologies Co., Ltd.
Recommended Value
This section uses 9600 as an example. Set this
parameter based on site requirements.
NOTE
For certain devices, this parameter does not need to be set.
This section uses 1 as an example. Set this parameter
based on site requirements.
Setting
Select the device attribute to be accessed
from the drop-down list box.
Select the device type to be accessed from
the drop-down list box.
Select ECC800 from the drop-down list
box.
8 FAQ
332