Bosch C60 Manual page 85

12.4.1 Sub trigger mode
12.4.2 Distance mode
Bosch Motorsport
Channels for display
To display segment times use the following channels:
Channel
Laptrigger_lapdiff
Laptrigger_lapdiffb
Laptrigger_lapseg_dlast
Laptrigger_lapseg_dbest
Using main trigger (20 ms pulse) at Start-Finish-Line. 3 sub triggers (40 ms pulse) posi-
tioned at 1,000 m, 2,000 m and 3,000 m.
To deactivate sub trigger mode uncheck box.
Define settings for lap timing
(main trigger).
Define settings for sub trigger.
Not applicable with a GPS lap trigger.
Sub Trigger
Sub Trigger
Main Trigger
The sub trigger mode cannot be used with the GPS lap trigger.
Using main trigger (20 ms pulse) at Start-Finish-Line.
Set 'Mode' to 'Distance' and enter desired segment distances.
Segment time is automatically calculated at each segment. Time difference to last lap and
fastest lap is automatically calculated at each segment.
To deactivate distance mode set 'Mode' to 'None'.
Data_Logger_C_60_Manual
Function
Time difference between finished lap and last lap
Time difference between finished lap and best lap
Difference of lap segment time compared to last lap
Difference of lap segment time compared to best lap
Sub Trigger
Lap Trigger | 12
85 / 100