Mounting Instructions - Sony DG110BM Instruction Manual

2. Mounting Instructions

. Be sure to chuck the stem of the probe for mounting. Make sure that the set screws are
out of contact with the probe as mounted.
. Fix the cable in a suitable position to prevent possible cable breakage.
Never handle the cable by forcibly pulling or bending it.
(Inside bend radius 40 mm or more)
. Use of a nominal 2.5 spring washer is recommended to prevent loosening of the feeler.
However, the spring washer does not need to be used for flat feelers.
2
(E)
DG110BM/DG110BE