1
2
1
2
1
MANUAL RACK AND PINION ASSEMBLY
(STEERING GEAR CASE)
REMOVAL
1) Remove steering joint cover (1).
2) Loosen steering shaft upper joint bolt (1). Then remove steering
shaft lower joint bolt (2).
3) Remove steering lower joint from steering pinion.
4) Hoist vehicle and remove wheels.
5) Disconnect both tie rod ends (1) from knuckles (2), using puller.
6) Remove steering gear case (1).
1
NOTE:
If it is hard to remove steering gear case, disconnect ex-
haust pipe (1) from exhaust manifold.
MANUAL RACK AND PINION 3B-5