Toro 2024 Operator's Manual page 46

Figure 40
1. Screw
4. Lower the pedestrian safety bar and secure it in place
(Figure 41).
Figure 41
1. Pedestrian safety bar (lowered position shown)
5. Push down on the rear platform latch securing the
operator platform, and swing it out to the desired
position, ensuring that it locks in place
Note: The operator platform has 4 positions: travel
(swung all the way into the machine), full-out, and 2
intermediate positions.
2. Cover
(Figure 42).
1. Rear platform latch
Deploying the Zap-Alert System
The Zap-Alert system is an electric strike sensing device on
the machine that triggers a strobe light and audible alarm in
the event that the drill bit, reamer, or stake breaks into an
energized power line. In the event of an electric strike, the
machine will become energized, setting off the alarm. The
operator's platform is electrically isolated from the rest of
the machine to protect you.
46
Figure 42