Connect To Power; Pair Up With The Subwoofer; Automatic Pairing; Manual Pairing - Philips 7000 Series User Manual

USB
AUX

Connect to Power

• Before connecting the AC power cord,
ensure you have completed all other
connections.
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the
underside of the unit.
• Connect the mains cable to the AC~
Socket of the unit and then into a mains
socket.
• Connect the mains cable to the AC~Socket
of the subwoofer and then into a mains
socket.
• Power cord quantity and plug type vary by
regions.
HDMI OUT OPTICAL IN AUX IN AC IN
(ARC)

Pair up with the subwoofer

Automatic Pairing

Plug the Soundbar and the subwoofer into the
mains sockets and then press on the unit or
remote control to switch the unit to On mode.
The subwoofer and Soundbar will automatically
pair.
Tips
Do not press Pair on the rear of the
subwoofer, except for manual pairing.

Manual Pairing

If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1. Press and hold the
the Soundbar simultaneously, and then press
and hold Pair on the subwoofer.
The AUX/USB indicator on the Soundbar
and the Pair indicator on subwoofer will blink
slowly. The subwoofer will be paired
successfully in about 2 seconds.
2. The AUX/USB Indicator goes off,the pairing
LED indicator of subwoofer grows constant
when successful.
3. If manual pairing failed and the Pair indicator
still keeps blinking, repeat step 1.
Tips
• The subwoofer should be within 6 m of the Soundbar
in an open area (the closer the better).
• Remove any objects between the subwoofer and the
Soundbar.
• If the wireless connection fails again, check if there is a
conflict or strong interference (e. g. interference from
an electronic device) around the location.Remove these
conflicts or strong interferences and repeat the above
procedures.
(Source & Vol-)
on
&