Fujitsu PRIMERGY CX25 0 M4 Series Disassembly And Recycling Document page 40

Disassembly and recycling
Removing SXM2 modules
Ê Remove all SXM2 modules:
Removing the SXM2 riser (R)
Figure 42: Removing the riser (R)
Ê Place the SXM2 tray on the left side.
Ê Remove two screws (see circles).
Ê Unplug the riser from the SXM2 base board.
40 Disassembly and Recycling Instructions
Ê Loosen the eight captive
screws on the SXM2 module
by the sequence from 8 to 1.
Ê Carefully remove the SXM2
module from its sockets in a
vertical motion.
CX400 M4