B.1.D Connections And Data Ports Of The Ebike - GE eBike Service Manual

B.1.d Connections and Data Ports of the eBike
3
2
1b
1a
4
Underside of ergometer baseplate
Figure B-2: Connections and Data Ports of the eBike
3
2
1b
1a
4
eBike L / EL connection panel
Figure B-3: Connections and data ports of systems eBike L and eBike EL
1a PORT 1: Digital RS232 interface (9-pin Sub-D) for data communication with PC and EKG
unit and output for remote start of the EKG unit.
1b PORT 3: Digital RS232 interface (5-pin DIN connector) for data communication with PC
and EKG unit.
2 PORT 2: Additional digital RS232 interface, e.g., for software updates
3 ANALOG: Analog I/O port (8-pin DIN connector) for analog control and analog data
communication.
4 SERVICE not used.
optional: NIBP module
5 Connector for jack plug of the microphone cable.
6 Connector for cuff tubing.
Note:
For pin configurations, refer to Appendix A: Interfaces.
- 12 -
B: Mechanical Design
eBike L / EL cuff connection
eBike, eBike L, eBike EL
5
6
Underside of control terminal
2018112-003 Rev J
6
5