Nokia 7368 Product Manual page 94

Intelligent services access manager ont
Hide thumbs Also See for 7368:
Table of Contents

Advertisement

Configure a G-240W-J indoor ONT
(1 of 2)
(2 of 2)
2
3
4
5
6
7
8
94
Port Mode
All Ports to Bridge Mode
Port 1 - 4
IPv4 Address
Subnet Mask
DHCP Enable
DHCP Start IP Address
Field
DHCP End IP Address
DHCP Lease Time
Primary DNS
Secondary DNS
Static DHCP Entry
MAC Address
IPv4 Address
Select the mode for each port.
Click Save.
Enter the DHCP configuration information.
Click Save.
Enter the Static DHCP information.
Click Add.
You can also use this panel to delete a Static DHCP MAC address or IPv4 address.
STOP. This procedure is complete.
3FE-48009-AAAA-TCZZA
7368 ISAM ONT G-240W-J Product Guide
Select this checkbox to set all ports to Bridge mode
Drop-down port mode for each port: Route mode or Bridge mode
IP Address of the ONT
Subnet mask of the ONT
Select this checkbox to enable DHCP
Starting DHCP IP address
Description
Ending DHCP IP address
DHCP lease time (in min)
Primary DNS identifier
Secondary DNS identifier
MAC address for the static DHCP
IPv4 address for the static DHCP
Issue: 01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7368 isam ont g-240w-j

Table of Contents