Requesting For Chair Control Rights; Requesting For The Floor; Setting The Continuous Presence; Enabling And Disabling Voice Activation - Huawei RP100-55T User Manual

HUAWEI RP100-55T Room Presence
User Guide



6.3.10 Requesting for Chair Control Rights

More conference control rights are available on the chair site than those available on a
non-chair site.
This function of requesting chair control is available to non-chair sites only and can be
successfully implemented only when no chair site exists in the conference.
Audio-only sites cannot request chair control rights.

6.3.11 Requesting for the Floor

If a non-chair site wants to speak during a conference, the site can request the floor from the
chair site.
The Request Floor operation is available when a chair site exists in the conference. After a
site requests the floor, the request is submitted to the chair site. Then the chair site can
determine whether to give the floor to the site.



6.3.12 Setting the Continuous Presence

The continuous presence function is used to display the videos of two or more sites on the
same monitor simultaneously. The number of sites whose videos are displayed and the layout
of the videos vary according to continuous presence modes.
To set the continuous presence, do the following:
Select a pane. From the drop-down list box in the displayed dialog box, select the site whose
video is to be displayed in the pane. Then select OK.
If a site already exists in the pane selected, the new site will replace the original site.
You can select Delete All to delete all the sites in the continuous presence.

6.3.13 Enabling and Disabling Voice Activation

The voice activation function is used during ongoing discussions in the conference. The site
with the loudest voice is viewed by the other sites in the conference.
You can select the sensitivity based on experience after enabling the voice activation function.
Issue 01 (2013-12-20)
: Indicates that the speaker of the site is not muted. You can press
speaker.
: Indicates that the speaker of the site is muted. You can press
speaker.
If the chair site gives the floor to the site, the site is broadcast and the microphones of all
the other non-chair sites are muted.
If the chair site does not give the floor to the site, the conference status remains
unchanged.
This function is available only when continuous presence resources have been reserved for the
conference.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
6 Conference Control
to mute the
to unmute the
52