Curve Diagram - Siemens Sinamics S120 Comissioning Manual

Startdrive commissioning tool
2.4 User interface - trace function
2.4.2

Curve diagram

The curve diagram displays the selected signals of a recording. Binary signals are shown in
the lower diagram as bit track. You can adapt the display of the signals in the signal table
and with the toolbar of the curve diagram.
Setting options and displays in the curve diagram
The following diagram shows the display in Startdrive as example:
Figure 2-10
The Y scale in the diagram applies to the selected (highlighted in gray) signal in the legend.
The legend can be moved with the mouse.
See also
Trace function calls (Page 199)
42
Overview of ChartView
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Commissioning with Startdrive