3.2.4 Home Position (HP) Sensor Removal
1.
Remove the upper housing. (Refer to Section 3.2.1.)
2.
Disconnect the connector cable from the HP sensor connector.
3.
Release the hooks mounting the HP sensor to the paper eject frame using tweezers, then remove the HP
sensor.
;
After reattaching the HP sensor to the paper eject frame, be sure to mount the hooks to the frame
using the specified adhesive. (Refer to Chapter 6.)
Paper Eject Frame
WORK POINT
HP Sensor
Tweezers
Figure 3-6. HP Sensor Removal
Disassembly and Assembly
Connector Cable for the
HP Sensor
3-9