Message Retrieval - Toshiba CT User Manual

To assign a voice mail message mailbox number
Note This procedure is required for the initial storage of VM ID code to the Toshiba Voice
1. Press [DN] +
2. Enter the voice mail
ID code and the voice
mailbox [DN], plus
any required pauses
(up to 16 characters).
3. Press
To cancel the mailbox number
Press [DN] +

Message Retrieval

You can program a flashing
messages when it is pressed. Storing the message retrieval sequence in Steps 1~4 below is
required only once. It remains in memory unless cancelled or changed.
To assign the message retrieval sequence
1. Press [DN] +
Strata DK Digital Telephone 5/99
Mail system. Once programmed, these digits remain in memory until changed. To
change the code, repeat this procedure.
. You hear confirmation tone.
Example: for Toshiba voice mail
systems, enter
number.
= mailbox number of the [DN] you
203
pressed in Step 1.
. You hear a confirmation tone. The
LCD confirms the data storage.
+ .
or [PhDN/MW] to automatically retrieve your voice mail
. You hear a confirmation tone.
+ the mailbox
Features
Voice Mail Integration
656 ID CODE SET
91203
DATA PROGRAMED
657 ID CODE SET
73