Commissioning the cooling circuit
5.3 Filling the internal deionized water circuit
Status signals of the cooling unit
The following status signals are sent from the cooling unit to the converter:
Status signal
Cooling unit ready
•
•
Cooling unit is operating correctly.
•
•
•
•
Group alarm
•
•
Group fault
•
•
130
Low = cooling unit not ready
High = cooling unit ready to switch on. You
can start the converter.
The cooling unit operates correctly after
switch-on.
A pump is running.
The water pressure and the water level match
the specifications.
The coolant temperature lies within the cor-
rect range.
High = no alarm active
Low = at least one alarm message is active
High = no-fault active
Low = at least one fault is active
Function name
DI0
DI1
DI3
DI3
Cabinet Modules liquid cooled
Manual, 10/2015, A5E37067587A
TM31 terminal
-X520:1
-X520:2
-X520:3
-X520:4