Toshiba 4400 Series Installation And Operation Manual page 19

Battery cabinets

Hide thumbs Also See for 4400 Series:

Table of Contents

Carefully inspect the UPS for shipping damage. Units shipped within North America and NAFTA are

shrink wrapped.

1. Remove shrink wrap.

2. Unbolt the rails from

both the unit and the

shipping pallet.

3. Place the rails on the

front of the pallet.

4. Attach the rails as shown to the front of

the pallet.

Use the four 1/2 x 3" bolts to secure the

rails to the shipping pallet.

6. Place the tie brackets in the slots at the

upper and lower ends of the ramps.

SLOWLY roll the unit down the ramp.

FIGURE 6.1 – UNSHIPPING 15-30KVA BATTERY CABINET

4400 Series UPS Battery Cabinet Installation and Operation Manual – 69445-005

Table of Contents