Connecting To Uninterruptible Power Supply (Ups) - NEC Express5800/E120d-1 User Manual

Chapter 2 Preparations
2.2.1

Connecting to Uninterruptible Power Supply (UPS)

To connect the power cord of the server to a UPS, use the connector output on the rear of the UPS. For
details, refer to the manual supplied with the UPS.
Example
Option slot
Input connector
(NEMA5-15P)
When the power cord is connected to a UPS, the BIOS settings may need to be changed in order to link the
server with the power supply from the UPS.
To change the settings, select "Server" and then select "Power Control Configuration" and then
"AC-LINK" in BIOS Setup Utility, and change the displayed parameters. Select Power On to perform
automatic operations by using the UPS. For details, refer to Chapter 3 (2.BIOS Setup Utility
Computer interface port (UPS)
Overload protection
reset button
Computer interface port (COM)
Voltage sensitivity setting button
Express5800/E120d-1 User's Guide
2. Installation and Connection
Connector outputs
TVSS device connector
(SETUP)).
93