Troubleshooting - Philips CT3508/ASUSA0P2 User Manual

Troubleshooting

Remove and reinstall the
The phone does not
battery (see page 6). Then
switch on
charge the phone until the
battery icon has stopped
flashing. Finally, unplug from
the charger and try to switch
the mobile on.
The display shows Somebody tried to use your
phone but didn't know the
BLOCKED when
PIN code nor the unblocking
you switch on
code (PUK). Contact your
service provider.
The network connection is
The and
lost. Either you are in a radio
symbols are not
displayed shadow (in a tunnel or
between tall buildings) or you
are
coverage area. Try from
another place or contact your
network
assistance/information about
the network.
Troubleshooting
outside the network
operator for
The display responds more
The display doesn't
slowly at very low temperatures.
respond (or the
display responds This is normal and does not
affect the operation of the
slowly) to key
phone. Take the phone to a
presses
warmer place and try again.
In other cases please contact
your phone supplier.
Press and hold
Your phone doesn't
switch off the phone, check
return to the idle
screen that the SIM card and the
battery are installed correctly,
and switch it on again.
This feature is network and
Your phone doesn't
display the phone subscription dependent. If the
network doesn't send the
numbers of incoming
caller's number, the phone will
calls
display
your operator for detailed
information on this subject.
Some networks don't allow
You can't send text
message exchanges with other
messages
networks.
operator
information on this subject.
c
, or
Call 1 instead. Contact
Contact your
for detailed
87