Page 1: Pictorial Index
Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each component adjustment before driving, etc.
Page 2: Table Of Contents
TABLE OF CONTENTS For your information .......8 Instrument cluster Reading this manual.....10 How to search ......11 Pictorial index .......12 Instrument cluster Warning lights and For safety and security indicators......98 Gauges and meters... 104 Multi-information display 1-1. For safe use (with monochrome Before driving.......30 display)......
Page 3 4-4. Refueling wheel and mirrors Opening the fuel Steering wheel ....174 tank cap ......247 Inside rear view mirror ..176 4-5. Toyota Safety Sense Outside rear view Toyota Safety Sense..251 mirrors ......179 PCS (Pre-Crash Safety 3-5. Opening and closing the system) ......
Page 4 TABLE OF CONTENTS 5-7. “SETUP” menu Audio system Using the “SETUP” menu (“Bluetooth ” menu) ..364 Using the “SETUP” menu 5-1. Basic Operations (“TEL” menu)....367 Audio system types....314 ® 5-8. Bluetooth Audio Steering wheel audio ® Operating a Bluetooth switches......317 enabled portable AUX port/USB port.....318...
Page 5 6-3. Using the storage features Maintenance and care List of storage features ..408 • Glove box ......409 7-1. Maintenance and care • Console box ....410 Cleaning and • Overhead console ..410 protecting the • Cup holders/bottle vehicle exterior ....432 holders......411 Cleaning and •...
Page 6 TABLE OF CONTENTS If you have a flat tire When trouble arises (vehicles with emergency tire puncture repair kit) ..566 8-1. Essential information If the engine will not Emergency flashers ...514 start ......... 581 If your vehicle has to If the shift lever cannot be be stopped in an shifted from P ....
Page 7: Index
For vehicles with navigation system or multimedia system, refer to the “Navigation and multimedia system Owner’s manual” for infor- mation regarding the equipment listed below. • Navigation system • Audio/video system • Rear view monitor system Toyota Motor Europe NV/SA, Avenue du Bourget 60 - 1140 Brussels, Belgium www.toyota-europe.com...
Page 8: For Your Information
Accessories, spare parts and modification of your Toyota Both genuine Toyota and a wide variety of other spare parts and accessories for Toyota vehicles are currently available on the market. Should it be deter-...
Page 9: Driving
Scrapping of your Toyota The SRS airbag and seat belt pretensioner devices in your Toyota contain explosive chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cause an accident such as fire. Be...
Page 10: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures.
Page 11: How To Search
How to search Searching by name ■ • Alphabetical index ..P. 640 Searching installation ■ position • Pictorial index....P. 12 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 636 Searching by title ■...
Page 12: Pictorial Index
Pictorial index Pictorial index ■ Exterior (Sedan) Doors ......... . . P. 132 Locking/unlocking .
Page 13 Pictorial index Windshield wipers ....... . . P. 242 Precautions against winter season ..... P. 310 To prevent freezing (windshield wiper de-icer) .
Page 14 Pictorial index ■ Exterior (Wagon) Side doors ........P. 132 Locking/unlocking .
Page 15 Pictorial index Windshield wipers ....... . . P. 242 Precautions against winter season ..... P. 310 To prevent freezing (windshield wiper de-icer) .
Page 16 Pictorial index ■ Instrument panel (Left-hand drive vehicles) Engine switch ....... . P. 209, 212 Starting the engine/changing the modes .
Page 17: Audio System
Pictorial index Multi-information display ..... . . P. 108, 111 Display........P. 108, 111 When the warning messages are displayed .
Page 18 Pictorial index ■ Switches (Left-hand drive vehicles) Power window switches ......P. 182 Door lock switch .
Page 19 Pictorial index Paddle shift switches ......P. 221 Meter control switches ......P. 108, 112 LDA (Lane Departure Alert) switch .
Page 20 Pictorial index ■ Interior (Left-hand drive vehicles) SRS airbags ........P. 39 Floor mats .
Page 21 Pictorial index Inside rear view mirror ......P. 176 Sun visors ........P. 423 Vanity mirrors .
Page 22 Pictorial index ■ Instrument panel (Right-hand drive vehicles) Engine switch ....... . P. 209, 212 Starting the engine/changing the modes .
Page 23 Pictorial index Multi-information display ..... . . P. 108, 111 Display........P. 108, 111 When the warning messages are displayed .
Page 24 Pictorial index ■ Switches (Right-hand drive vehicles) Manual headlight leveling dial ..... P. 235 Outside rear view mirror switches ....P. 179 Stop &...
Page 25 Pictorial index Paddle shift switches ......P. 221 Meter control switches ......P. 108, 112 LDA (Lane Departure Alert) switch .
Page 26 Pictorial index ■ Interior (Right-hand drive vehicles) SRS airbags ........P. 39 Floor mats .
Page 27 Pictorial index Inside rear view mirror ......P. 176 Sun visors ........P. 423 Vanity mirrors .
Page 28 Pictorial index...
Page 29: For Safety And Security
For safety and security 1-1. For safe use Before driving.......30 For safety drive ....32 Seat belts......34 SRS airbags......39 Exhaust gas precautions ..51 1-2. Child safety Airbag manual on-off system .......52 Safety information for children ......54 Child restraint systems ..55 1-3. Theft deterrent system Engine immobilizer system .......78 Double locking system..87...
Page 30: 1-1. For Safe Use
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 31 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 32: For Safety Drive
1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 33 1-1. For safe use WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle. ●...
Page 34: Seat Belts
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 35 1-1. For safe use Adjusting the height of the belt (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
Page 36 ■ Seat belt regulations If seat belt regulations exist in the country where you reside, please contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for seat belt replacement or installation.
Page 37 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 38 Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. ●...
Page 39: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆...
Page 40 1-1. For safe use Airbag system components Front impact sensors Driver airbag Airbag manual on-off switch Driver’s seat belt buckle switch Front passenger airbag Driver’s knee airbag Side impact sensors (front) SRS warning light Seat belt pretensioners and force limiters “PASSENGER AIRBAG”...
Page 41 1-1. For safe use The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. As the airbags deploy, a chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the motion of the occu- pants.
Page 42 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 43 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not lean against the door, the roof side rail or the front, side and rear pil- lars. ● Do not allow anyone to kneel on the passenger seat toward the door or put their head or hands outside the vehicle.
Page 44 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not attach anything to areas such as a door, windshield glass, side door glass, front or rear pillar, roof side rail and assist grip. (Vehicles with emer- gency tire puncture repair kit: Except for the speed limit label →P.
Page 45 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 46 1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Slight abrasions, burns, bruising etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ● A loud noise and white powder will be emitted. ●...
Page 47 1-1. For safe use ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags and SRS curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
Page 48 1-1. For safe use ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
Page 49 When to contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional In the following cases, the vehicle will require inspection and/or repair. Con- tact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, as soon as possible. ●...
Page 50 1-1. For safe use ● The portion of the front pillars, rear pil- lars or roof side rail garnishes (padding) containing the curtain shield airbags inside is scratched, cracked or otherwise damaged.
Page 51: Exhaust Gas Precautions
The exhaust system needs to be checked periodically. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 52: 1-2. Child Safety
1-2. Child safety Airbag manual on-off system This system deactivates the front passenger airbag. Only deactivate the airbag when using a child restraint system on the front passenger seat. “PASSENGER AIRBAG” indica- Vehicles without smart entry & start system This indicator light turns on when the airbag system is ON (only when the engine switch is in the “ON”...
Page 53 “PASSENGER AIRBAG” indicator information If any of the following problems occurs, it is possible that there is a malfunc- tion in the system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 54: Safety Information For Children
1-2. Child safety Safety information for children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. ●...
Page 55: Child Restraint Systems
● The use of a Toyota genuine child restraint system is recom- mended, as it is safer to use in this vehicle. Toyota genuine child restraint systems are made specifically for Toyota vehicles. They can be purchased at a Toyota dealer.
Page 56 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the weight and size of the child, installed on the rear seat. Accord- ing to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 57 1-2. Child safety Child restraint system Install the available child restraint system in vehicle upon confirming the following items. Standards for child restraint systems ■ Use a child restraint system that conforms to ECE R44 1, 2 ECE R129 The following approval mark is displayed on child restraint systems which are conformed.
Page 58 1-2. Child safety Mass group (ECE R44 only) ■ This Mass group table is required when confirming the child restraint system compatibility. Confirm in accordance with the child restraint system compatibility table. (→P. 64, 71). The child restraint system which conforms to the standard of ECE R44 is categorized into 5 groups according to the weight of the child.
Page 59 1-2. Child safety Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attach- P. 64 ment ISOFIX rigid anchor P.
Page 60 1-2. Child safety Installation method Page Sedan Anchor brackets (for top strap) P. 76 Wagon attachment...
Page 61 1-2. Child safety When using a child restraint system When installing a child restraint system to a front passenger ■ seat For the safety of a child, install a child restraint system to a rear seat. When installing a child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.
Page 62 1-2. Child safety WARNING ■ When using a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is on.
Page 63 1-2. Child safety WARNING ■ When using a child restraint system ● Only put a forward-facing child restraint system on the front seat when unavoid- able. When installing a forward-facing child restraint on the front passenger seat, move the seat as far back as pos- sible.
Page 64 1-2. Child safety Child restraint system fixed with a seat belt ◆ Confirming the possible installation seating positions and the Mass Group for the seat belt installation type child restraint systems. Confirm the corresponding [Mass group] from the weight of the child (→P.
Page 65 Systems Out- on-off switch Center board Up to 10 kg “TOYOTA (22 lb.) BABY SAFE PLUS” “TOYOTA MINI” Up to 13 kg (28 lb.) Rearward- facing — 1, 2 9 to 18 kg “TOYOTA DUO+” Forward- (20 to 39 lb.) facing —...
Page 66 1-2. Child safety When securing some types of child restraint systems in rear seat, it may not be possible to properly use the seat belts in positions next to the child restraint without interfering with it or affecting seat belt effec- tiveness.
Page 67 1-2. Child safety ● When installing a junior seat, if the child in your child restraint sys- tem is in a very upright position, adjust the seatback angle to the most comfortable position. And if the seat belt shoulder anchor is ahead of the child seat belt guide, move the seat cushion forward.
Page 68 If your child restraint system does not provide a locking clip, you can purchase the following item from any authorized Toyota dealer or repairer, or another duly qualified and equipped professional: Locking clip for child restraint system (Part No.
Page 69 1-2. Child safety Child restraint system fixed with an ISOFIX rigid anchor ISOFIX rigid anchors (ISOFIX child restraint system) ■ Lower anchors are provided for the outboard rear seats. (Tags displaying the location of the anchors are attached to the seats.)
Page 70 1-2. Child safety Confirming the Mass group and Size class for ECE R44 ISOFIX ■ corresponding child restraint systems Confirm the corresponding [Mass group] from the weight of the child (→P. 58) (Ex. 1) When the weight is 12 kg, [Mass group 0+] (Ex.
Page 71 1-2. Child safety Child restraint systems fastened with ISOFIX (ECE R44) - Com- ■ patibility and Recommended child restraint systems table ISOFIX child restraint systems are divided in different “size class”. According to this “size class”, you will be allowed to use it in the vehicle seating position mentioned in the table below.
Page 72 Mass groups Child Restraint class Systems Passen- Outboard Center ger seat Carrycot — “TOYOTA G 0+, Up to 10 kg BABY SAFE (22 lb.) PLUS with ISO- FIX FIXATION, BASE PLAT- FORM” “TOYOTA MINI” Up to 13 kg “TOYOTA MIDI”...
Page 73 FIXATION, BASE PLATFORM”, lock the support leg where 4th hole is partially visible. ● When using a “TOYOTA MINI” or “TOYOTA MIDI”, adjust the sup- port leg and ISOFIX connectors as follows: Lock the ISOFIX connectors where number 4 can be seen.
Page 74 1-2. Child safety i-Size child restraint systems fastened with ISOFIX (ECE ■ R129) - Compatibility table If your child restraint system is of “i-Size” category, you can install it on the positions mentioned by i-U in the table below. Child restraint system category can be found in the child restraint system manual.
Page 75 1-2. Child safety Installation with ISOFIX rigid anchor (ISOFIX child restraint ■ system) Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. If the head restraint interferes with the child restraint system installation and the head restraint can be removed, remove the head restraint.
Page 76 1-2. Child safety Using an anchor bracket (for top strap) Anchor brackets (for top strap) ■ Anchor brackets are provided for the outboard rear seat. Use anchor brackets when fixing the top strap. Sedan Wagon Top strap Anchor brackets Top strap Anchor brackets Fixing the top strap to the anchor bracket ■...
Page 77 1-2. Child safety Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top strap. Make sure the top strap is securely latched. (→P. 172) When installing the child restraint system with the head restraint being raised, be sure to have the top strap pass underneath the head restraint.
Page 78: 1-3. Theft Deterrent System
1-3. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.
Page 79 1-3. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ●...
Page 80 1-3. Theft deterrent system ■ Certifications for the engine immobilizer system (vehicles without smart entry & start system)
Page 81 1-3. Theft deterrent system...
Page 82 1-3. Theft deterrent system...
Page 83 1-3. Theft deterrent system ■ Certifications for the engine immobilizer system (vehicles with smart entry & start system)
Page 84 1-3. Theft deterrent system...
Page 85 1-3. Theft deterrent system...
Page 86 1-3. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
Page 87: Double Locking System
1-3. Theft deterrent system ∗ Double locking system Unauthorized access to the vehicle is prevented by disabling the door unlocking function from both the interior and exterior of the vehicle. Vehicles employing this system have labels on the window glass of both front doors.
Page 88 1-3. Theft deterrent system WARNING ■ Double locking system precaution Never activate the double locking system when there are people in the vehi- cle because all the doors cannot be opened from inside the vehicle.
Page 89: Alarm
1-3. Theft deterrent system ∗ Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is being set: ● A locked door or trunk/back door is unlocked or opened in any way other than using the entry function (vehicles with smart entry &...
Page 90 1-3. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type alarm system. ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: ● Nobody is in the vehicle. ●...
Page 91 1-3. Theft deterrent system ■ When the battery is disconnected Be sure to cancel the alarm system. If the battery is disconnected before canceling the alarm, the system may be triggered when the battery is reconnected. ■ Alarm-operated door lock ●...
Page 92 1-3. Theft deterrent system Intrusion sensor (if equipped) The intrusion sensor detects intruders or movement in the vehicle. When an intruder or movement is detected, the alarm will be trig- gered. This system is designed to deter and prevent vehicle theft but does not guarantee absolute security against all intrusions.
Page 93 1-3. Theft deterrent system ■ Intrusion sensor detection considerations The sensor may trigger the alarm in the following situations: ● Persons or pets are in the vehicle. ● The vehicle is parked in a place where extreme vibrations or noises occur, such as in a parking garage.
Page 94 1-3. Theft deterrent system ■ Certification...
Page 95 1-3. Theft deterrent system...
Page 96 1-3. Theft deterrent system...
Page 97: Instrument Cluster
Instrument cluster Instrument cluster Warning lights and indicators ......98 Gauges and meters ...104 Multi-information display (with monochrome display) ......108 Multi-information display (with color display)...111 Fuel consumption information.......117...
Page 98: Instrument Cluster Warning Lights And Indicators
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all indicators and warning lights illuminated.
Page 99: Warning Lights
2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in any of the vehicle’s systems. 1, 2 Brake system warning Stop & Start cancel light (→P. 526) indicator (→P. 528) (red) (Diesel engine) Electric power steering Malfunction indicator system warning light lamp (→P.
Page 100 There may be a malfunction in a system if a light does not turn on, or if the lights do not turn off. Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional.
Page 101: Indicators
2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Security indicator (on Turn signal indicator the center panel) (→P. 228) (→P. 78) Headlight high beam Cruise control indicator indicator (→P. 233) (→P.
Page 102 There may be a malfunction in a system if a light does not turn on, or if the lights do not turn off. Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional.
Page 103 Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional...
Page 104: Gauges And Meters
2. Instrument cluster Gauges and meters Vehicles with monochrome display Vehicles with color display The units used on the speedometer may differ depending on the tar- get region.
Page 105 2. Instrument cluster Tachometer Displays the engine speed in revolutions per minute. Multi-information display Presents the driver with a variety of driving-related data. (→P. 108, 111) Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Clock Displays the time.
Page 106 Displays the remaining distance until the engine oil should be changed. If “-” is displayed before distance, it means oil maintenance is overdue. Have the engine oil changed by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 107 ● When “--” is displayed, the system may be malfunctioning. Take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ● The temperature range that can be displayed is from -40°C (-40°F) to 50°C (122°F).
Page 108: Multi-Information Display (With Monochrome Display)
2. Instrument cluster Multi-information display (with mono- chrome display) Display contents The multi-information display presents the driver with a variety of driv- ing-related data. ● Drive information ● Warning messages (→P. 533) ● Eco Driving Indicator Zone Dis- play (→P. 109) Drive information Display items can be switched by pressing the “DISP”...
Page 109 2. Instrument cluster When refueling, turn the engine switch to the “LOCK” position (vehicles without smart entry & start system) or off (vehicles with smart entry & start system). If the vehicle is refueled without turning the engine switch to the “LOCK” position or off, the display may not be updated.
Page 110 2. Instrument cluster ■ When disconnecting and reconnecting battery terminals The following information data will be reset: ● Elapsed time ● Average fuel consumption ● Driving range ● Average vehicle speed ■ Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem to continue using the display.
Page 111: Multi-Information Display (With Color Display)
2. Instrument cluster Multi-information display (with color display) Display contents The multi-information display presents the driver with a variety of vehi- cle data. ● Menu icons Displays the following informa- tion when an icon is selected. (→P. 112) Some of the information may be displayed automatically depending on the situation.
Page 112 2. Instrument cluster Settings display Select to change the meter display settings and the operation set- tings of some vehicle functions. (→P. 114) Operating the meter control switches The multi-information display is operated using the meter control switches. Enter/set Select an item/change pages Return to the previous screen Drive information ●...
Page 113 2. Instrument cluster ● Distance (driving range/after start) Displays the estimated maximum distance that can be driven with the quantity of fuel remaining and the distance driven after the engine was started, respectively • This distance is computed based on your average fuel consump- tion.
Page 114 2. Instrument cluster Settings display The settings of the following items can be changed, refer to P. 625. For functions that can be enabled or disabled, the function switches between on and off each time is pressed. ● (LDA [Lane Departure Alert]) Select to adjust LDA (Lane Departure Alert) sensitivity.
Page 115 2. Instrument cluster • Drive information 1 through 3 Select to select up to 2 items that will be displayed on a Drive informa- tion screen, up to 3 Drive information screens can be set. • Pop-up display Select to set the pop-up displays , which may appear in some situa- tions, on/off.
Page 116 2. Instrument cluster WARNING ■ The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display.
Page 117: Fuel Consumption Information
2. Instrument cluster ∗ Fuel consumption information The fuel consumption information can be displayed on the navi- gation system or multimedia system screen. Display the trip information or past record screen Press the “CAR” button, and then select “Trip information” or “Past record”...
Page 118 2. Instrument cluster Past record Best recorded fuel consumption Previous fuel consumption record Current fuel consumption Reset the past record data Update the past record data “Trip information” screen appears These images are examples only, and may vary slightly from actual conditions.
Page 119: Operation Of Each Component
Operation of each component 3-1. Key information Keys........120 3-2. Opening, closing and locking the doors Side doors......132 Trunk (sedan) ....139 Back door (wagon).....143 Smart entry & start system ......148 3-3. Adjusting the seats Front seats......166 Rear seats ......168 Driving position memory ..170 Head restraints ....172 3-4.
Page 120: 3-1. Key Information
3-1. Key information Keys The keys The following keys are provided with the vehicle. Vehicles without smart entry & start system Keys Operating the wireless remote con- trol function Key number plate Vehicles with smart entry & start system Electronic keys •...
Page 121 3-1. Key information Wireless remote control Vehicles without smart entry & start system Locks all the doors and trunk/ back door (→P. 133) Unlocks the trunk/back door Unlocks all the doors and trunk/ back door (→P. 133) Vehicles with smart entry & start system Locks all the doors and trunk/ back door (→P.
Page 122 ■ If you lose your keys New genuine keys can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional using the other key and the key number stamped on your key number plate. Keep the plate in a safe...
Page 123 3-1. Key information ■ When riding in an aircraft When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any buttons on the key while inside the aircraft cabin. If you are carrying a key in your bag etc., ensure that the buttons are not likely to be pressed accidentally.
Page 124 3-1. Key information ■ Key battery depletion Vehicles without smart entry & start system If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary. (→P. 489) Vehicles with smart entry & start system ●...
Page 125 3-1. Key information ■ Certification for wireless remote control (vehicles without smart entry & start system)
Page 126 3-1. Key information...
Page 127 3-1. Key information...
Page 128 3-1. Key information...
Page 129 3-1. Key information...
Page 130 3-1. Key information...
Page 131 If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit any authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional immediately with all remaining electronic keys that were provided with your vehicle.
Page 132: Side Doors
3-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the smart entry & start system, wireless remote control or door lock switch. Unlocking and locking the doors from the outside ◆ Entry function (vehicles with smart entry & start system) Carry the electronic key to enable this function.
Page 133 3-2. Opening, closing and locking the doors ◆ Wireless remote control Vehicles without smart entry & start system Locks all the doors and trunk/ back door Check that the door is securely locked. Unlocks all the doors and trunk/back door Vehicles with smart entry &...
Page 134 3-2. Opening, closing and locking the doors ■ Operation signals The emergency flashers flash to indicate that the doors and trunk/back door have been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Security feature If a door is not opened within approximately 30 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.
Page 135 3-2. Opening, closing and locking the doors Locking and unlocking the doors from the inside ◆ Door lock switch Locks all the doors Unlocks all the doors Sedan: The trunk is also locked/ unlocked. ◆ Inside lock button Locks the door Unlocks the door The front doors can be opened by pulling the inside handles...
Page 136 3-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the locks are set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down the rear door switches to lock the rear doors.
Page 137 3-2. Opening, closing and locking the doors Setting and canceling the functions (vehicles without naviga- ■ tion system or multimedia system) To switch between setting and canceling, follow the procedure below. Close all the doors, and turn the engine switch to “ON” position (vehicles without smart entry &...
Page 138 3-2. Opening, closing and locking the doors ■ Conditions affecting operation Vehicles without smart entry & start system →P. 123 Vehicles with smart entry & start system →P. 152 ■ Customization Settings (e.g. automatic door locking and unlocking system) can be changed. (Customizable features →P.
Page 139: Trunk (Sedan)
3-2. Opening, closing and locking the doors Trunk (sedan) The trunk can be locked/unlocked and opened/closed by the fol- lowing procedures. Unlocking and locking the trunk ◆ Entry function (vehicles with smart entry & start system) Carry the electronic key to enable this function. Unlocks the trunk The trunk cannot be unlocked for 3 seconds after the trunk is...
Page 140 If you cannot operate the trunk opener If the trunk opener does not operate, there may be a problem with the trunk opener system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
Page 141 3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Before driving ● Make sure that the trunk lid is fully closed. If the trunk lid is not fully closed, it may open unexpectedly while driving and hit near-by objects or luggage in the trunk may be thrown out, causing an accident.
Page 142 ● Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to suddenly shut again after it is opened.
Page 143: Back Door (Wagon)
3-2. Opening, closing and locking the doors Back door (wagon) The back door can be locked/unlocked and opened/closed by the following procedures. Unlocking and locking the back door ◆ Entry function (vehicles with smart entry & start system) Carry the electronic key to enable this function. Unlocks the back door back door...
Page 144 If the back door opener does not operate, there may be a problem with the back door opener system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. The following steps may be used as an emergency measure to ensure that the back door can be opened from the inside.
Page 145 3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Before driving ● Make sure that the back door is fully closed. If the back door is not fully closed, it may open unexpectedly while driving, causing an accident.
Page 146 If a bicycle carrier or similar heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended.
Page 147 Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other Damper stay than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it.
Page 148: Smart Entry & Start System
3-2. Opening, closing and locking the doors ∗ Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ●...
Page 149 3-2. Opening, closing and locking the doors Wagon Antennas outside cabin Antenna outside luggage compartment Antenna inside luggage compartment Antennas inside cabin ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the side Sedan doors The system can be operated when the electronic key is within about 0.7 m (2.3...
Page 150 3-2. Opening, closing and locking the doors ■ Alarms and warning indicators A combination of exterior and interior alarms are used to prevent theft of the vehicle and unforeseeable accidents resulting from erroneous operation. Take appropriate measures according to the warning message shown on the multi-information display.
Page 151 3-2. Opening, closing and locking the doors Alarm Situation Correction procedure When the engine switch is in IGNITION ON or ACCES- Shift the shift lever to P, Interior and exte- SORY mode, the driver’s turn the engine switch rior alarms sound door was closed after the close continuously...
Page 152 3-2. Opening, closing and locking the doors ■ Battery-saving function In the following circumstances, the smart entry & start system is disabled in order to prevent the vehicle and electronic key batteries from discharging. ● When the smart entry & start system has not been used for 5 days or more ●...
Page 153 3-2. Opening, closing and locking the doors ■ Note for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases. • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 154 3-2. Opening, closing and locking the doors ■ When the vehicle is not driven for extended periods To prevent theft of the vehicle, do not leave the electronic key within 2 m (6 ft.) of the vehicle. ■ To operate the system properly Make sure to carry the electronic key when operating the system.
Page 155 3-2. Opening, closing and locking the doors ■ Certification for the smart entry & start system...
Page 156 3-2. Opening, closing and locking the doors...
Page 157 3-2. Opening, closing and locking the doors...
Page 158 3-2. Opening, closing and locking the doors...
Page 159 3-2. Opening, closing and locking the doors...
Page 160 3-2. Opening, closing and locking the doors...
Page 161 3-2. Opening, closing and locking the doors...
Page 162 3-2. Opening, closing and locking the doors...
Page 163 3-2. Opening, closing and locking the doors...
Page 164 3-2. Opening, closing and locking the doors...
Page 165 (→P. 149) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for details, such as the frequency of radio waves and timing of the emitted radio waves.
Page 166: 3-3. Adjusting The Seats
3-3. Adjusting the seats Front seats Adjustment procedure Manual seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side) Lumbar support adjustment switch (if equipped for driver’s side) Power seat Seat position adjustment switch Seatback angle adjustment switch...
Page 167 3-3. Adjusting the seats WARNING ■ When adjusting the seat position ● Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat. ● Do not put your hands under the seat or near the moving parts to avoid injury.
Page 168: Rear Seats
3-3. Adjusting the seats Rear seats The seatbacks of the rear seats can be folded down. Folding down the rear seatbacks Before folding down ■ Stow the seat belt buckles as shown. Lower each of the head restraints while pushing the lock release button.
Page 169 3-3. Adjusting the seats ■ Returning the seatbacks (sedan) Tilt the seatback up until it locks, making sure that you hold the seat belt to prevent it from getting caught between the seat- back and the inner side of the vehicle. Make sure the shoulder belt passes through the guide and that the seat belt is in position before folding down the...
Page 170: Driving Position Memory
3-3. Adjusting the seats ∗ Driving position memory This feature automatically adjusts the driver’s seats to suit your preferences. Driving position memory Your preferred driving position (the position of the driver’s seat) can be memorized and recalled by pressing a button. Two different driving positions can be entered into memory.
Page 171 3-3. Adjusting the seats Recall procedure ■ Vehicles with Multidrive: Check that the shift lever is in P. Vehicles with manual transmission: Check that the parking brake is set. Turn the engine switch to IGNITION ON mode. Press button “1” or “2” for the driving position you want to recall until...
Page 172: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Pull the head restraints up. Down Push the head restraint down while Lock pressing the lock release button. release button ■ Removing the head restraints Front seat Push a flathead screwdriver into the slot.
Page 173 3-3. Adjusting the seats ■ Installing the head restraints Align the head restraint with the installa- tion holes and push it down to the lock position. ■ Adjusting the height of the head restraints (front seats) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Page 174: Steering Wheel
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and press the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 175 3-4. Adjusting the steering wheel and mirrors WARNING ■ Caution while driving Do not adjust the steering wheel. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked.
Page 176: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror (vehicles with auto anti- glare inside rear view mirror) The height of the rear view mirror can be adjusted to suit your driving posture.
Page 177 3-4. Adjusting the steering wheel and mirrors Anti-glare function Manual anti-glare inside rear view mirror Reflected light from the headlights of vehicles behind can be reduced by operating the lever. Normal position Anti-glare position Auto anti-glare inside rear view mirror Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced.
Page 178 3-4. Adjusting the steering wheel and mirrors ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. WARNING Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
Page 179: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, press the switch. Left Right To adjust the mirror, press the switch. Right Down Left...
Page 180 3-4. Adjusting the steering wheel and mirrors Folding the mirrors Manual type Push the mirror back in the direc- tion of the vehicle’s rear. Power type Press the switch to fold the mir- rors. Press it again to extend them to the original position.
Page 181 3-4. Adjusting the steering wheel and mirrors WARNING ■ While driving Observe the following precautions. Failing to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. ● Do not adjust the mirrors. ●...
Page 182: Power Windows
3-5. Opening and closing the windows ∗ Power windows Opening and closing procedures The power windows can be opened and closed using the following switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : To stop the window partway, oper- ate the switch in the opposite direc- tion.
Page 183 3-5. Opening and closing the windows ■ The power windows can be operated when The engine switch is in the “ON” position (vehicles without smart entry & start system) or IGNITION ON mode (vehicles with smart entry & start system). ■...
Page 184 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. WARNING Observe the following precautions.
Page 185: Driving
4-1. Before driving 4-4. Refueling Driving the vehicle .....186 Opening the fuel tank cap ......247 Cargo and luggage ....198 4-5. Toyota Safety Sense Trailer towing .....200 Toyota Safety Sense ..251 4-2. Driving procedures PCS (Pre-Crash Safety Engine (ignition) switch system) ......257 (vehicles without smart entry &...
Page 186: Driving The Vehicle
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving. Starting the engine →P. 209, 212 Driving Multidrive With the brake pedal depressed, shift the shift lever to D or M. (→P. 219) Release the parking brake. (→P. 229) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.
Page 187 4-1. Before driving Parking the vehicle Multidrive With the shift lever in D or M, depress the brake pedal. Shift the shift lever to P. (→P. 219) Set the parking brake. (→P. 229) Turn the engine switch to the “LOCK” position (vehicles without smart entry &...
Page 188 4-1. Before driving Starting off on a steep uphill Multidrive Make sure that the parking brake is set and shift the shift lever to D or M. Gently depress the accelerator pedal. Release the parking brake. Manual transmission With the parking brake set and the clutch pedal fully depressed, shift the shift lever to 1.
Page 189 4-1. Before driving ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is recom- mended: ● For the first 300 km (200 miles): Avoid sudden stops. ● For the first 800 km (500 miles): Do not tow a trailer.
Page 190 4-1. Before driving ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (→P. 607) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■...
Page 191 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the location of the brake and accel- erator pedals to avoid depressing the wrong pedal.
Page 192 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving on slippery road surfaces ● Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle, resulting in an accident. ●...
Page 193 As a result, the discs may wear more quickly than conventional brake discs. Therefore, when replacing the brake pads, Toyota recommends that you also have the thickness of the discs mea- sured. It is dangerous to drive the vehicle when the wear limits of the brake pads and/or those of the brake discs are exceeded.
Page 194 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun. Doing so may result in the following: •...
Page 195 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, if you accidentally move the shift lever or depress the accelera- tor pedal, this could cause an accident or fire due to engine overheating.
Page 196 4-1. Before driving NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain the engine output. ● Vehicles with Multidrive: Do not use the accelerator pedal or depress accelerator and brake pedals at the same time to hold the vehicle on a hill.
Page 197 Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have any authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional check the following.
Page 198: Cargo And Luggage
4-1. Before driving Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. WARNING ■ Things that must not be carried in the trunk/luggage compartment The following things may cause a fire if loaded in the trunk/luggage com- partment.
Page 199 4-1. Before driving WARNING ■ Load and distribution ● Do not overload your vehicle. ● Do not apply loads unevenly. Improper loading may cause deterioration of steering or braking control which may cause death or serious injury.
Page 200: Trailer Towing
Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Ask your local authorized Toyota dealer or repairer, or another duly qualified and equipped professional, for further details before towing, as there are additional legal requirements in some countries.
Page 201 4-1. Before driving Important points regarding trailer loads Total trailer weight and permissible drawbar load ■ Total trailer weight Weight of the trailer itself plus the trailer load should be within the maximum towing capacity. Exceeding this weight is danger- ous.
Page 202 4-1. Before driving WARNING ■ When the gross vehicle mass limit or maximum permissible axle capacity is exceeded Do not exceed the established speed limit for towing a trailer in built-up areas or 100 km/h (62 mph), whichever is lower. Failing to observe this precaution may lead to an accident causing death or serious injury.
Page 203 : 205/60R16 tires : 215/55R17 or 225/45R18 tires : 205/60R16 tires with vehicle height up : 215/55R17 tires with vehicle height up : To distinguish the vehicle type, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 204 : 205/60R16 tires : 215/55R17 or 225/45R18 tires : 205/60R16 tires with vehicle height up : 215/55R17 tires with vehicle height up : To distinguish the vehicle type, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 205 Please take care to comply with your state’s laws when installing trailer lights. ■ Break-in schedule Toyota recommends that vehicles fitted with new power train components should not be used for towing trailers for the first 800 km (500 miles). ■ Maintenance ●...
Page 206 4-1. Before driving Guidance Your vehicle will handle differently when towing a trailer. In order to avoid accident, death or serious injury, keep the following in mind when towing: Checking connections between trailer and lights ■ Stop the vehicle and check the operation of the connection between the trailer and lights after driving for a brief period as well as before setting off.
Page 207 4-1. Before driving Important points regarding stability ■ Vehicle movement resulting from uneven road surfaces and strong crosswinds will affect handling. The vehicle may also be rocked by passing buses or large trucks. Frequently check behind when mov- ing alongside such vehicles. As soon as such vehicle movement occurs, immediately start to decelerate smoothly by slowly applying the brakes.
Page 208 4-1. Before driving WARNING Follow all the instructions described in this section. Failure to do so could cause an accident resulting in death or serious injury. ■ Trailer towing precautions When towing, make sure that none of the weight limits are exceeded. (→P.
Page 209: Engine (Ignition) Switch (Vehicles Without
4-2. Driving procedures Engine (ignition) switch (vehicles without smart entry & start system) Starting the engine Multidrive Push the parking brake switch to check that the parking brake is set. (→P. 229) Parking brake indicator will come on. Check that the shift lever is set in P. Firmly depress the brake pedal.
Page 210 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (→P. 78) Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 211 ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
Page 212: Engine (Ignition) Switch (Vehicles With Smart Entry & Start System)
4-2. Driving procedures Engine (ignition) switch (vehicles with smart entry & start system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Multidrive Push the parking brake switch to check that the parking brake is set.
Page 213 4-2. Driving procedures Manual transmission Push the parking brake switch to check that the parking brake is set. (→P. 229) Parking brake indicator will come on. Check that the shift lever is set in N. Firmly depress the clutch pedal. The engine switch indicator will turn green.
Page 214 4-2. Driving procedures Stopping the engine Multidrive Stop the vehicle. Shift the shift lever to P. Set the parking brake. (→P. 229) Press the engine switch. Release the brake pedal and check that the indicator on the engine switch is off. Manual transmission Stop the vehicle.
Page 215 4-2. Driving procedures Changing engine switch modes Modes can be changed by pressing the engine switch with the brake pedal (vehicles with Multidrive) or clutch pedal (vehicles with manual transmission) released. (The mode changes each time the switch is pressed.) Emergency flashers can be used.
Page 216 →P. 153 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (→P. 78) Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ Steering lock After turning the engine switch off and opening and closing the doors, the steering wheel will be locked due to the steering lock function.
Page 217 ■ When the engine switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped profes- sional, immediately. ■ When the electronic key battery is depleted →P.
Page 218 Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 219: Multidrive
4-2. Driving procedures ∗ Multidrive Shifting the shift lever While the engine switch is in the “ON” position (vehicles with- out smart entry & start system) or IGNITION ON mode (vehi- cles with smart entry & start system), move the shift lever with the brake pedal depressed.
Page 220 4-2. Driving procedures Shift position purpose Shift position Function Parking the vehicle/starting the engine Reversing Neutral Normal driving 7-speed sport sequential shiftmatic mode driving (→P. 222) : To improve fuel consumption and reduce noises, set the shift lever in the D position for normal driving.
Page 221 4-2. Driving procedures Selecting gear steps in the D position (vehicles with paddle shift switches) To drive using temporary gear step selection, operate the “-” paddle shift switch while the shift lever in D. Changing the gear step enables the level of engine braking force to be selected. The gear step can then be selected by operating the “-”...
Page 222 4-2. Driving procedures Changing gear steps in 7-speed sport sequential shiftmatic mode To enter 7-speed sport sequential shiftmatic mode, shift the shift lever to M. Gear steps can be selected by operating the shift lever or the “-” and “+” paddle shift switches (if equipped), allowing you to drive in the gear step of your choice.
Page 223 If the M indicator is not displayed after shifting the shift lever to the M position This may indicate a malfunction in the transmission system. Have your vehi- cle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
Page 224 4-2. Driving procedures ■ G AI-SHIFT The G AI-SHIFT is automatically changed to a suitable gear step while run- ning in sport mode according to the driving operations and running condi- tions. The G AI-SHIFT automatically operates when the driving mode is set to sport mode with the shift lever in the D position.
Page 225: Manual Transmission
4-2. Driving procedures ∗ Manual transmission Shifting the shift lever Fully depress the clutch pedal before operating the shift lever, and then release it slowly. Shifting the shift lever to R Shift the shift lever to the R posi- tion while lifting up the ring sec- tion.
Page 226 4-2. Driving procedures ■ Gear Shift Indicator display The Gear Shift Indicator may not be displayed when your foot is placed on the clutch pedal. ■ Maximum downshifting speeds Observe the following maximum downshifting speeds in the following table to prevent over-revving the engine.
Page 227 4-2. Driving procedures WARNING ■ Gear Shift Indicator display For safety, the driver should not look only at the display. Refer to the display when it is safe to do so while considering actual traffic and road conditions. Failure to do so may lead to an accident. NOTICE ■...
Page 228: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Right turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.
Page 229: Parking Brake
4-2. Driving procedures Parking brake Operating instructions Sets the parking brake During application: The parking brake indicator light will flash Once applied: The parking brake indicator light will on Press and hold the parking brake switch if an emergency occurs and it is necessary to operate the park- ing brake while driving.
Page 230 4-2. Driving procedures ■ Automatic apply function (vehicles with manual transmission) To prevent the parking brake from being left accidentally unapplied, the park- ing brake will be applied automatically under the following conditions: ● The vehicle is stopped. ● The engine switch is turned to the “ACC” position (vehicles without smart entry &...
Page 231 4-2. Driving procedures ■ When the system is overheating The system may become temporarily unavailable in order to prevent over- heating caused by repeated unnecessary switch operation. In this event, leaving the system to cool down for a short time will allow nor- mal operation to resume.
Page 232: Operating The Lights And
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions The front position, tail, license plate and instru- ment panel lights turn The headlights and all lights listed above turn The headlights and all lights listed above turn (If equipped) on and off automatically...
Page 233 4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams.
Page 234 4-3. Operating the lights and wipers AFS (if equipped) AFS (Adaptive Front-lighting System) improves visibility at intersec- tions and on curves by automatically adjusting the lateral angle of the headlights according to vehicle speed and the degree of the tire angle that are controlled by steering input.
Page 235 4-3. Operating the lights and wipers Manual headlight leveling dial (vehicles with halogen headlights) The level of the headlights can be adjusted according to the number of passengers and the loading condition of the vehicle. Raises the level of the head- lights Lowers the level of the head- lights...
Page 236 4-3. Operating the lights and wipers Follow me home system (if equipped) This system allows the headlights to be turned on for 30 seconds when the engine switch is turned to the “LOCK” position (vehicles without a smart entry & start system) or off (vehicles with a smart entry &...
Page 237 4-3. Operating the lights and wipers ■ Daytime running light system To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically whenever the engine is started and the parking brake is released with the headlight switch off or in the “AUTO”...
Page 238 4-3. Operating the lights and wipers ■ Automatic light off system Vehicles without smart entry & start system ● When the light switch is in the “AUTO” position, the headlight and all the lights turn off automatically if the engine switch is turned to the “ACC” or “LOCK”...
Page 239 ■ If the indicator flashes... It may indicate a malfunction in the system. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ Customization Settings (e.g. light sensor sensitivity) can be changed.
Page 240: Fog Light Switch
4-3. Operating the lights and wipers ∗ Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain or fog. Front and rear fog light switch The front and rear fog lights turn off. The front fog lights turn on.
Page 241 4-3. Operating the lights and wipers Rear fog light switch Rear fog light turns off. Rear fog light turns on. Releasing the switch ring returns it to Operating the switch ring again turns the rear fog light off. ■ Fog lights can be used when Vehicles with a front and rear fog light switch Front fog lights: The headlights or front position lights are turned on.
Page 242: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever The wiper operation is selected by moving the lever as follows. Intermittent windshield wipers Intermittent operation Low speed operation High speed operation Temporary operation Increases the intermittent wiper frequency Decreases intermittent...
Page 243 4-3. Operating the lights and wipers Washer/wiper dual operation Wipers operate automatically. If the headlights are on, the headlight cleaners will operate once. And then, the headlight cleaners will operate every five times you pull the lever. (if equipped) Rain-sensing windshield wipers With “AUTO”...
Page 244 4-3. Operating the lights and wipers Washer/wiper dual operation Wipers operate automatically. If the headlights are on, the headlight cleaners will operate once. And then, the headlight cleaners will operate every five times you pull the lever. (if equipped) ■ The windshield wiper and washer can be operated when The engine switch is in the “ON”...
Page 245 ■ When a nozzle becomes blocked In this case, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Do not try to clean it with a pin or other object. The nozzle will be damaged.
Page 246: Rear Window Wiper And Washer
4-3. Operating the lights and wipers ∗ Rear window wiper and washer Operating the wiper lever Turning the end of the lever turns on the rear window wiper and washer. Intermittent operation Normal operation Washer/wiper dual opera- tion Washer/wiper dual opera- tion ■...
Page 247: Tank Cap
■ Use of ethanol blended gasoline in a gasoline engine Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.
Page 248: Refueling
4-4. Refueling WARNING ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● Touch the vehicle or some other metal surface to discharge any static electricity. Sparks resulting from discharging static electricity may cause the fuel vapors to ignite.
Page 249: Opening The Fuel
4-4. Refueling Opening the fuel tank cap Press the fuel filler door opener switch. Turn the fuel tank cap slowly to open, and hang the fuel tank cap on the back of the fuel filler door. ■ When the fuel filler door cannot be opened by pressing the inside switch Pull the lever slowly rearward (not side- ways) as shown in the illustration.
Page 250 ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Failure to do so may cause a fire or other incident which may result in death or serious injury.
Page 251: Toyota Safety Sense
■ Toyota Safety Sense The Toyota Safety Sense is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.
Page 252 Toyota will not disclose the recorded data to a third party except: • With the consent of the vehicle owner or with the consent of the lessee if the vehicle is leased •...
Page 253 4-5. Toyota Safety Sense Front sensor The front sensor is located on the upper side of the windshield. It consists of 2 types of sensors, each of which detects information necessary to operate the drive assist systems. Laser sensors Monocular camera sensor WARNING ■...
Page 254 4-5. Toyota Safety Sense WARNING Laser classification label Laser explanatory label Laser emission data Maximum average power: 45 mW Pulse duration: 33 ns Wave length: 905 nm Divergence (horizontal × vertical): 28° × 12°...
Page 255 If the inner side of the windshield in front of the front sensor is dirty, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 256 When cleaning the inside of the windshield, do not allow glass cleaner to contact the lens. Also, do not touch the lens. If the lens is dirty or damaged, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 257: Pcs (Pre-Crash Safety System)
4-5. Toyota Safety Sense ∗ PCS (Pre-Crash Safety system) The pre-crash safety system uses the front sensor to detect vehicles in front of your vehicle. When the system determines that the possibility of a frontal collision with a vehicle is high, a...
Page 258 4-5. Toyota Safety Sense WARNING ■ Limitations of the pre-crash safety system ● The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-crash safety system instead of normal braking opera- tions under any circumstances.
Page 259 4-5. Toyota Safety Sense WARNING ● While driving, such as when driving through a railway crossing, the system may determine that the possibility of a collision with an object, such as rail- way crossing barrier, is high and operate the pre-crash braking function.
Page 260 4-5. Toyota Safety Sense Changing settings of the pre-crash safety system Enabling/disabling the pre-crash safety system ■ Press the PCS switch for 3 sec- onds or more. The PCS warning light will turn on and a message will be dis-...
Page 261 4-5. Toyota Safety Sense ■ Operational conditions The pre-crash safety system is enabled and determines that the possibility of a frontal collision with a vehicle is high. Each function is operational at the following speeds: ● Pre-crash warning: • Vehicle speed is approximately 15 to 140 km/h (10 to 86 mph).
Page 262 4-5. Toyota Safety Sense ■ Conditions under which the system may operate even if there is no pos- sibility of a collision ● In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate.
Page 263 4-5. Toyota Safety Sense • When passing extremely close to a vehicle or structural object • When there is a vehicle or object by the roadside at the entrance of a curve • When driving on a narrow path surrounded by a structure, such as in a tunnel or on an iron bridge •...
Page 264 4-5. Toyota Safety Sense • When rapidly closing on an electric toll gate barrier, parking area barrier, or other barrier that opens and closes • When using an automatic car wash • When approaching a low hanging object that may contact the vehicle,...
Page 265 4-5. Toyota Safety Sense • When the sensor is misaligned due to a strong impact being applied to the sensor, etc. • When the vehicle is being parked in a place where there is a low hanging object at the height of the front sensor •...
Page 266 4-5. Toyota Safety Sense ■ Situations in which the system may not operate properly ● In some situations such as the following, a vehicle may not be detected by the front sensor, preventing the system from operating properly: • If an oncoming vehicle is approaching your vehicle •...
Page 267 4-5. Toyota Safety Sense • When a vehicle ahead is not directly in front of your vehicle • When driving in inclement weather such as heavy rain, fog, snow or a sand storm • When the vehicle is hit by water, snow, dust, etc. from a vehicle ahead •...
Page 268 4-5. Toyota Safety Sense • If your vehicle is skidding • When the front part of the vehicle is raised or lowered • If the wheels are misaligned • If a wiper blade is blocking the front sensor • The vehicle is wobbling.
Page 269 If the PCS warning light continues to flash or the warning message does not disappear, the system may be malfunctioning. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ■...
Page 270: Lda (Lane Departure Alert)
4-5. Toyota Safety Sense ∗ LDA (Lane Departure Alert) Summary of function While driving on a road that has lane markers, this system recognizes the lane markers using a camera as a sensor to alert the driver when the vehicle deviates from its lane.
Page 271 4-5. Toyota Safety Sense Operating conditions ● When the vehicle speed is approximately 50 km/h (32 mph) or more. ● When the lane width is more than approximately 3 m (9.8 ft.). ● When driving on a straight road or through a curve with a radius of more than approximately 150 m (492 ft.).
Page 272 4-5. Toyota Safety Sense ■ Temporary cancelation of the LDA system functions If any of the following occurs, the LDA system functions will be temporarily canceled. The functions will resume after the necessary operating conditions have returned. ● The turn signal lever is operated.
Page 273 4-5. Toyota Safety Sense ■ Conditions in which the function may not operate correctly In the following situations, the front sensor may be unable to recognize lane markers causing the lane departure warning function to operate incorrectly. However, this does not indicate a malfunction.
Page 274 4-5. Toyota Safety Sense ■ When changing the tires Depending on the tires used, sufficient performance may not be maintainable. ■ Warning messages for the LDA system Warning messages are used to indicate a system malfunction or to inform the driver of the need for caution while driving.
Page 275 Do not modify the headlights or attach stickers to the surface of the lights. ● Do not modify the suspension. If your suspension needs repairs, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ●...
Page 276: Automatic High Beam
4-5. Toyota Safety Sense ∗ Automatic High Beam The Automatic High Beam uses an in-vehicle front sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary.
Page 277 4-5. Toyota Safety Sense High beam automatic turning on or off conditions When all of the following conditions are fulfilled, high beam will be automatically turned on: ● Vehicle speed is above approximately 40 km/h (25 mph). ● The area ahead of the vehicle is dark.
Page 278 4-5. Toyota Safety Sense Turning the high beam on/off manually Switching to low beam ■ Pull the lever to original posi- tion. The Automatic High Beam indi- cator will turn off. Push the lever away from you to activate the Automatic High Beam system again.
Page 279 4-5. Toyota Safety Sense ■ The Automatic High Beam can be operated when The engine switch is in the “ON” position (vehicles without a smart entry & start system) or IGNITION ON mode (vehicles with a smart entry & start sys- tem).
Page 280 4-5. Toyota Safety Sense ● In the situations below, the system may not be able to correctly detect the surrounding brightness levels, and may flash or expose nearby pedestrians to the high beam. Therefore, you should consider turning the high beams on or off manually rather than relying on the Automatic High Beam system.
Page 281 4-5. Toyota Safety Sense ■ If a warning message of the Automatic High Beam is displayed... It may indicate a malfunction in the system. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. WARNING ■...
Page 282: Rsa (Road Sign Assist)
4-5. Toyota Safety Sense RSA (Road Sign Assist) Summary of function RSA recognizes specific road signs using the front sensor and pro- vides information to the driver via the multi-information display. If the system judges that the vehicle is being driven over the speed limit, performing prohibited actions, etc., in relation to the recognized...
Page 283 4-5. Toyota Safety Sense Indication on the multi-information display After the front sensor recognizes a sign, it is displayed on the multi- information display when the vehicle passes the sign. ● When the driving assist system information is selected, a maxi- mum of 3 signs can be dis- played.
Page 284 4-5. Toyota Safety Sense Types of recognized road signs The following types of road signs, including electronic signs and blink- ing signs, are recognized. Type Multi-information display Speed limit begins/ends Rain Speed limit with supplemental mark (Displayed simul- taneously with...
Page 285: Warning Display
4-5. Toyota Safety Sense Warning display In the following situations, the RSA system alerts the driver using a warning display. ● When the vehicle speed exceeds the speed warning threshold applied to the speed limit of the sign displayed on the multi-informa- tion display, the sign color becomes inverted.
Page 286 4-5. Toyota Safety Sense ■ When driving vehicle in country with different speed unit Since RSA recognizes signs based on the set unit of the meter, it is neces- sary to change the set unit of the meter. Adjust the set unit of the meter to the speed unit of signs in the current location.
Page 287: Using The Driving Support Systems
4-6. Using the driving support systems ∗ Cruise control Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal. Cruise control indicator “SET” indicator Cruise control switch Setting the vehicle speed Press the “ON-OFF” button to activate the cruise control.
Page 288 4-6. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increase the speed Decrease the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
Page 289 If the cruise control speed cannot be set or if the cruise control cancels imme- diately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 290: Speed Limiter
4-6. Using the driving support systems ∗ Speed limiter A desired maximum speed can be set using the cruise control switch. The speed limiter prevents vehicle speed from exceeding the set speed. Setting the vehicle speed Press the switch to activate the speed limiter.
Page 291 The set speed is automatically canceled when the cruise control is activated. ■ If the speed limiter indicator turns off It may indicate a malfunction in the system. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 292 4-6. Using the driving support systems WARNING ■ To avoid operating the speed limiter by mistake Keep the speed limiter switch off when not in use. ■ Situations unsuitable for speed limiter Do not use the speed limiter in either of the following situations. Doing so may result in control of the vehicle being lost and could cause a serious or fatal accident.
Page 293: Stop & Start System
4-6. Using the driving support systems ∗ Stop & Start system The Stop & Start system stops and restarts the engine according to the clutch pedal operation for stopping and starting the vehi- cle. Stopping the engine With the clutch pedal fully depressed, stop the vehicle. Then shift the shift lever to N.
Page 294 4-6. Using the driving support systems Disabling the Stop & Start system Press the Stop & Start cancel switch to disable the Stop & Start system. The Stop & Start cancel indicator will come on. Pressing the switch again to re- enable the Stop &...
Page 295 4-6. Using the driving support systems ■ Operating conditions ● The Stop & Start system is operational when all of the following conditions are met: • The clutch pedal is not being depressed. • The shift lever is in N. •...
Page 296 4-6. Using the driving support systems ■ Automatic engine start function ● In the following circumstances, the engine will automatically restart when the engine is stopped by the Stop & Start system. (In order to have the engine stopped by the Stop & Start system again, drive the vehicle once.) •...
Page 297 ● Installation and removal of electrical components and wireless devices may affect the Stop & Start system, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ If the windshield is fogged up while the engine is stopped by the Stop &...
Page 298 4-6. Using the driving support systems Switching the idling stop time with the air conditioning system Changing the setting by multi-information display ■ Monochrome display: Select “STOP & START” on the settings display and press and hold the “DISP” switch. (→P. 108) Select a desired setting and press and hold the “DISP”...
Page 299 4-6. Using the driving support systems ■ The Stop & Start system protection feature Vehicles without a smart entry & start system: When an excessively loud sound is being projected by the audio system, the audio system may be auto- matically cut off in order to reduce battery consumption.
Page 300 4-6. Using the driving support systems Status B: Displays the cumulative time that the engine is stopped by the Stop & Start (Monochrome display) system from the previous reset until the system is reset again. (Color display) The status B display can be reset. Monochrome display: Press and hold the TRIP switch on the steering wheel when the ECO ODO is displayed on the multi-information display.
Page 301 4-6. Using the driving support systems Message Details/Actions • The battery charge amount may be low. → Engine stop is temporarily prohibited to prioritize charging of the battery, but if the engine is operated for a short while, engine stop is allowed. •...
Page 302 4-6. Using the driving support systems Message Details/Actions • The brake booster load decreased. • The vehicle is operated at a high elevation. “For brake → When a predetermined load is gener- system” ated by the brake booster, the system recovers.
Page 303 If any one of the following situations occurs, the Stop & Start system may not operate correctly, thus, please have your vehicle checked by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. ●...
Page 304: Driving Assist Systems
4-6. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supple- mentary and should not be relied upon too heavily when operat- ing the vehicle.
Page 305 4-6. Using the driving support systems ◆ PCS (Pre-Crash Safety system) (if equipped) →P. 257 ◆ Emergency brake signal When the brakes are applied suddenly, the emergency flashers automatically flash to alert the vehicle behind. When the TRC/VSC systems are operating The slip indicator light will flash while the TRC/VSC systems are operating.
Page 306 TRC has been disabled even if the VSC OFF switch has not been pressed TRC and hill-start assist control cannot be operated. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ Sounds and vibrations caused by the ABS, brake assist, TRC, VSC and hill-start assist control systems ●...
Page 307 4-6. Using the driving support systems ■ Reduced effectiveness of EPS The effectiveness of EPS is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. The steering wheel may feel heavy as a result. Should this occur, refrain from excessive steering input or stop the vehicle and turn the engine off.
Page 308 4-6. Using the driving support systems WARNING Any of the following conditions may result in an accident which could cause death or serious injury: ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road).
Page 309 The ABS, TRC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for further information when replacing tires or wheels.
Page 310: 4-7. Driving Tips
4-7. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 311 4-7. Driving tips When driving the vehicle Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road con- ditions. When parking the vehicle Park the vehicle and move the shift lever to P (Multidrive) or R (man- ual transmission) without setting the parking brake.
Page 312 Repairing or replacing snow tires (vehicles with the tire pressure warn- ing system) Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 313: Audio System
Audio system ® 5-1. Basic Operations 5-6. Using Bluetooth devices ® Audio system types ...314 Bluetooth audio/phone..356 Steering wheel audio Using the steering switches......317 wheel switches ....362 ® AUX port/USB port ....318 Registering a Bluetooth device ......363 5-2. Using the audio system 5-7.
Page 314: 5-1. Basic Operations
5-1. Basic Operations ∗ Audio system types Vehicles with multimedia system or navigation system Owners of models equipped with a multimedia system or navigation system should refer to the “Navigation and multimedia system Owner’s manual”. Vehicles without multimedia system or navigation system CD player and AM/FM radio ●...
Page 315 5-1. Basic Operations ● Type B ● Type C...
Page 316 5-1. Basic Operations ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. WARNING ■ Certification for the CD player This product is a class I laser product.
Page 317: Steering Wheel Audio Switches
5-1. Basic Operations Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Page 318: Aux Port/Usb Port
5-1. Basic Operations ∗ AUX port/USB port Connect an iPod, USB memory device or portable audio player to the AUX port/USB port as indicated below. Press the “MODE” button to select “iPod”, “USB” or “AUX”. Connecting using the AUX port/USB port iPod ■...
Page 319: Using The Audio System
5-2. Using the audio system ∗ Optimal use of the audio system The sound quality, volume balance and ASL settings can be adjusted. Displays the “SETUP” menu Changes the following settings • Sound quality and volume balance →P. 320 The sound quality and balance setting can be changed to pro- duce the best sound.
Page 320 5-2. Using the audio system Using the audio control function Changing sound quality modes ■ Press the “SETUP” button. Turn the tune/scroll knob to select “Sound Setting”. Press the knob. Turn the knob as corresponds to the desired mode. “BASS”, “TREBLE”, “FADER”, “BALANCE”, or “ASL” can be selected. Press the knob.
Page 321: Using The Radio
5-3. Using the radio ∗ Radio operation Press the “MODE” button until “AM” or “FM” is displayed. Type A AF/region code/TA mode setup AM/FM mode button Tune/scroll knob: Adjusting the Displays station list frequency or selecting items Seeking the frequency Back button Adjusting the volume or turn- Station selector buttons...
Page 322 5-3. Using the radio Type B AF/region code/TA mode setup AM/FM mode button Tune/scroll knob: Adjusting the Displays station list frequency or selecting items Seeking the frequency Back button Adjusting the volume or turn- Station selector buttons ing the audio system on or off...
Page 323 5-3. Using the radio Type C AF/region code/TA mode setup Scanning for receivable sta- tions Tune/scroll knob: Adjusting the frequency or selecting items/ Seeking the frequency displays station list Adjusting the volume or turn- Station selector buttons ing the audio system on or off AM/FM mode button Setting station presets Search for desired stations by turning the tune/scroll knob or press-...
Page 324 5-3. Using the radio Scanning radio stations (type C only) Scanning the preset radio stations ■ Press and hold the “SCAN” button until you hear a beep. When the desired station is reached, press the button once again. Scanning all radio stations within range ■...
Page 325 5-3. Using the radio RDS (Radio Data System) This feature allows your radio to receive station. Listening to stations of the same network ■ Press the “SETUP” button. Turn the tune/scroll knob to “RADIO” and press the knob. Turn the knob as corresponds to the desired mode: “FM AF” or “Region code”.
Page 326 5-3. Using the radio ■ EON (Enhanced Other Network) system (for traffic announcement func- tion) If the RDS station (with EON data) you are listening to is not broadcasting a traffic information program and the audio system is in the TA (traffic announcement) mode, the radio will be switched automatically to a station broadcasting a traffic information program in the EON AF list when traffic information begins.
Page 327: Cd Player Operation
5-4. Playing an audio CD and MP3/WMA discs ∗ CD player operation Insert a disc, press the “MODE” button to begin listening to a Type A Disc eject Repeat play Tune/scroll knob: Selecting a Playback file or displays text message Displays folder list Selecting a folder Selecting a track, fast-forward-...
Page 328 5-4. Playing an audio CD and MP3/WMA discs Type B Disc eject Playback Tune/scroll knob: Selecting a Selecting a folder file or displays text message Displays folder list Back button Selecting a track, fast-forward- Random playback ing or rewinding Repeat play Adjusting the volume or turn- ing the audio system on or off...
Page 329 5-4. Playing an audio CD and MP3/WMA discs Type C Disc eject Playback Tune/scroll knob: Selecting a Selecting a folder file or displays folder list Searching playback Displays text message Selecting a track, fast-forward- Random playback ing or rewinding Repeat play Adjusting the volume or turn- ing the audio system on or off...
Page 330 5-4. Playing an audio CD and MP3/WMA discs Loading CDs or MP3 and WMA discs Insert a disc. Ejecting CDs or MP3 and WMA discs Press the disc eject button and remove the disc. Using the CD player Selecting a track ■...
Page 331 5-4. Playing an audio CD and MP3/WMA discs Fast-forwarding and rewinding tracks ■ To fast-forward or rewind, press and hold “∧” or “∨” on the “SEEK TRACK” button. Random playback ■ Press [RDM]. To cancel, press [RDM] again. Repeat play ■...
Page 332 5-4. Playing an audio CD and MP3/WMA discs Scanning a folder (type C only) ■ Press and hold the “SCAN” button until you hear a beep. The first 10 seconds of the first file in each folder will be played. When the desired folder is reached, press the button again.
Page 333 If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Message...
Page 334 5-4. Playing an audio CD and MP3/WMA discs ■ If a CD is left inside the CD player or in the ejected position for extended periods The CD may be damaged and may not play properly. ■ Lens cleaners Do not use lens cleaners. Doing so may damage the CD player. ■...
Page 335 5-4. Playing an audio CD and MP3/WMA discs ● Compatible disc formats The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2 CD-ROM XA Mode 2, Form 1 and Form 2 • File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet) MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.
Page 336 5-4. Playing an audio CD and MP3/WMA discs ● Playback • To play MP3 file with steady sound quality, we recommend a fixed bit rate of 128 kbps and a sampling frequency of 44.1 kHz. • CD-R or CD-RW playback may not be possible in some instances, depending on the characteristics of the disc.
Page 337 5-4. Playing an audio CD and MP3/WMA discs NOTICE ■ Discs and adapters that cannot be used Do not use the following types of discs. Also, do not use 8 cm (3 in.) disc adapters, DualDiscs or printable discs. Doing so may damage the player and/or the disc insert/eject function. ●...
Page 338: 5-5. Using An External Device
5-5. Using an external device ∗ Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Press the “MODE” button until “iPod” is displayed. Connecting an iPod →P. 318 Control panel Type A Tune/scroll knob: Selecting an iPod menu mode iPod menu/song or displays Displays song list...
Page 339 5-5. Using an external device Type B Tune/scroll knob: Selecting an iPod menu mode iPod menu/song or displays Displays song list text message Selecting a song, fast-forward- Back button ing or rewinding Shuffle playback Adjusting the volume or turn- Repeat play ing the audio system on or off Playback...
Page 340 5-5. Using an external device Type C Tune/scroll knob: Selecting an Playback iPod menu/song or displays iPod menu mode song list Selecting a song, fast-forward- Displays text message ing or rewinding Shuffle playback or back button Adjusting the volume or turn- Repeat play ing the audio system on or off...
Page 341 5-5. Using an external device Selecting a play mode Press [MENU] to select iPod menu mode. Turning the tune/scroll knob clockwise changes the play mode in the following order: “Playlists”→“Artists”→“Albums”→“Songs”→“Podcasts”→“Genres” →“Composers”→“Audiobooks” Press the knob to select the desired play mode. Play mode list ■...
Page 342 5-5. Using an external device Selecting a list ■ Turn the tune/scroll knob to display the first selection list. Press the knob to select the desired item. Pressing the knob changes to the second selection list. Repeat the same procedure to select the desired item. To return to the previous selection list, press the back button (type A and B) or [BACK] (type C).
Page 343 5-5. Using an external device Switching the display Press the tune/scroll knob (type A and B) or the “TEXT” button (type Track title, Artist name and Album title are shown on the display. To return to the previous display, press the knob or the back button (type A and B), or the “TEXT”...
Page 344 If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Message...
Page 345 5-5. Using an external device ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ● Made for • iPod touch (4th generation) •...
Page 346 5-5. Using an external device WARNING ■ Caution while driving Do not connect iPod or operate the controls. Doing so may cause an accident, resulting in death or serious injury. NOTICE ■ To prevent damage to iPod or its terminal ●...
Page 347: Listening Usb Memory Device
5-5. Using an external device ∗ Listening USB memory device Connecting a USB memory enables you to enjoy music from the vehicle speakers. Press the “MODE” button until “USB” is dis- played. Connecting a USB memory →P. 318 Control panel Type A Tune/scroll knob: Selecting a Playback...
Page 348 5-5. Using an external device Type B Tune/scroll knob: Selecting a Selecting a folder file or displays text message Displays folder list Back button Selecting a file, fast-forward- Random playback ing or rewinding Repeat play Adjusting the volume or turn- ing the audio system on or off Playback...
Page 349 5-5. Using an external device Type C Tune/scroll knob: Selecting a Selecting a folder file or displays folder list Searching playback Displays text message Selecting a file, fast-forward- Random playback or back but- ing or rewinding Adjusting the volume or turn- Repeat play ing the audio system on or off Playback...
Page 350 5-5. Using an external device Selecting a folder Selecting folders one at a time ■ Press “∧” or “∨” on the “FOLDER” button (type A), or [<] or [>] (type B and C) to select the desired folder. Selecting a folder and file from folder list ■...
Page 351 5-5. Using an external device Scanning the files in a folder (type C only) Press the “SCAN” button. The first 10 seconds of each file will be played. When the desired file is reached, press the button again. Fast-forwarding and rewinding files To fast-forward or rewind, press and hold “∧”...
Page 352 If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Message...
Page 353 5-5. Using an external device ● MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 354 5-5. Using an external device ● MP3 and WMA playback • When a device containing MP3 or WMA files is connected, all files in the USB memory are checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we rec- ommend that you do not include any files other than MP3 or WMA files or create any unnecessary folders.
Page 355: Using The Aux Port
5-5. Using an external device ∗ Using the AUX port This port can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. Press the “MODE” but- ton until “AUX” is displayed. Connecting a portable player →P.
Page 356: Bluetooth ® Audio/Phone
® 5-6. Using Bluetooth devices ® ∗ Bluetooth audio/phone ® The following can be performed using Bluetooth wireless com- munication: ◆ ® Bluetooth audio ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication.
Page 357 ® 5-6. Using Bluetooth devices Device registration/connection flow ® 1. Register the Bluetooth device to be used with audio system (→P. 363) ® 2. Connect the registered Bluetooth device to be used (→P. 364, 365) 3. Set automatic connection of the device (→P.
Page 358 ® 5-6. Using Bluetooth devices Audio unit Type A ® Bluetooth connection condi- tion If “BT” is not displayed, the ® Bluetooth audio/phone cannot be used. Displays set up menu Tune/scroll knob Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Press and hold: Displays information that is too long to be dis- played at one time on the display (depending on the type of the...
Page 359 ® 5-6. Using Bluetooth devices Type B ® Bluetooth connection condi- tion If “BT” is not displayed, the ® Bluetooth audio/phone cannot be used. Displays set up menu Tune/scroll knob Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Off-hook switch Turns the hands-free system on/starts a call...
Page 360 ® 5-6. Using Bluetooth devices ® Menu list of the Bluetooth audio/phone To enter a menu, press the tune/scroll knob and navigate menus by using the knob. First menu Second menu Third menu Operation details Registering “Pairing” ® Bluetooth device Listing the registered “List phone”...
Page 361 ® 5-6. Using Bluetooth devices First menu Second menu Third menu Operation details Adding a new num- “Add contacts” Registering a speed “Add SD” dial Deleting a number “Delete call stored in the call his- “Phonebook” history” tory Deleting a number “Delete contacts”...
Page 362: Using The Steering Wheel Switches
® 5-6. Using Bluetooth devices ∗ Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone, or portable digital audio player (portable player). ® Operating Bluetooth phone using the steering wheel switches Volume call volume...
Page 363: Registering A Bluetooth ® Device
® 5-6. Using Bluetooth devices ® Registering a Bluetooth device ® Before using the Bluetooth audio/phone, it is necessary to reg- ® ister a Bluetooth device in the system. Follow the procedure below to register (pair) a device: ® How to register a Bluetooth device Press the “SETUP”...
Page 364: 5-7. "Setup" Menu
5-7. “SETUP” menu Using the “SETUP” menu (“Bluetooth*” ∗ menu) ® Registering a Bluetooth device in the system allows the system to function. The following functions can be used for registered devices: Registering a portable player Select “Pairing” using the tune/scroll knob (→P. 360), and perform the procedure for registering a portable player.
Page 365 5-7. “SETUP” menu Listing the registered portable players Select “List audio” using the tune/scroll knob. (→P. 360) The list of registered portable players will be displayed. ● Connecting the registered portable player to the audio system Select the name of the portable player to be connected using the tune/scroll knob.
Page 366 5-7. “SETUP” menu Displaying the device status Select “Bluetooth info” using the tune/scroll knob. (→P. 360) ● Displaying the device name Select “Device name” using the knob. ● Displaying the device address Select “Device address” using the knob. : Bluetooth is a registered trademark of Bluetooth SIG, Inc. Setting the automatic connection confirmation display to on or off If the “Display setting”...
Page 367: Using The "Setup" Menu ("Tel" Menu)
5-7. “SETUP” menu ∗ Using the “SETUP” menu (“TEL” menu) Adding a new phone number Select “Add contacts” using the tune/scroll knob. (→P. 360) ● Transferring all contacts from the cellular phone Select “Overwrite all” using the knob and press [YES].
Page 368 5-7. “SETUP” menu ● Deleting missed call history Select “Missed Calls” using the tune/scroll knob. Select the desired phone number using the knob and press [YES]. To delete all missed call history data, press [ALL] and then press [YES]. ● Deleting a number from all call histories (Outgoing calls, Incoming calls and Missed calls) Select “All Calls”...
Page 369 5-7. “SETUP” menu Deleting another cellular phone’s phonebook Select “Delete Phonebook” using the tune/scroll knob. (→P. 360) Select the desired phonebook using the knob and press [YES]. Setting call volume Select “Call Volume” using the tune/scroll knob. (→P. 360) Change the call volume. To decrease the volume: Turn the knob counterclockwise.
Page 370: Bluetooth Audio
® 5-8. Bluetooth Audio ® Operating a Bluetooth enabled portable ∗ player Type A Tune/scroll knob: Selecting a Playback/pause track or displays text message Selecting a track, fast-forward- Back button ing or rewinding Random playback Power/volume knob: Adjusting the volume or turning the Repeat play audio system on or off Playback...
Page 371 ® 5-8. Bluetooth Audio Type B Tune/scroll knob: Selecting a Playback track Playback/pause Displays text message Selecting a track, fast-forward- Random playback or back but- ing or rewinding Power/volume knob: Adjusting Repeat play the volume or turning the audio system on or off...
Page 372 ® 5-8. Bluetooth Audio Selecting and scanning an album Selecting an album ■ Press [<] or [>] to select the desired album. Scanning the first track of all the album (type B only) ■ Press and hold the “SCAN” button until you hear a beep. The first 10 seconds of the first track in each album will be played.
Page 373 ® 5-8. Bluetooth Audio Playing and pausing tracks Press Switching the display Press the tune/scroll knob (type A) or the “TEXT” button (type B). Track title and Artist name are displayed on the display. To return to the previous display, press the knob or the back button (type A) or the “TEXT”...
Page 374: Bluetooth Phone
® 5-9. Bluetooth Phone ∗ Making a phone call To enter the “TEL” mode, press the off-hook switch. Dialing by selecting a name Select “Phonebook” using the tune/scroll knob. Select the desired name using the knob and press the off-hook switch.
Page 375 ® 5-9. Bluetooth Phone Dialing from call histories Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls” using the tune/scroll knob. Select a desired number using the knob and press the off-hook switch. The following operations can be performed: ●...
Page 376: Receiving A Phone Call
® 5-9. Bluetooth Phone Receiving a phone call Answering the phone Press the off-hook switch. Refusing the call Press the on-hook switch. Receiving a call when on another call Press the off-hook switch. Pressing the off-hook switch again returns you to the previous call. Adjusting the ring tone volume when receiving a call To decrease the volume: Turn the power/volume knob counterclock- wise.
Page 377: Speaking On The Phone
® 5-9. Bluetooth Phone Speaking on the phone Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the operation of the phone.
Page 378 ® 5-9. Bluetooth Phone ■ When talking on the phone ● Do not talk simultaneously with the other party. ● Keep the volume of the received voice down. Otherwise, voice echo will increase. ■ Automatic volume adjustment When vehicle speed is 80 km/h (50 mph) or more, the volume automatically increases.
Page 379: Bluetooth
® 5-10. Bluetooth ® Bluetooth ® When using the Bluetooth audio/phone ■ ● In the following situations, the system may not function. ® • The portable player does not support Bluetooth • The cellular phone is located outside the service area ®...
Page 380 ® 5-10. Bluetooth ® About Bluetooth ■ Bluetooth is a registered trade- mark of Bluetooth SIG, Inc. Compatible models ■ ® ● Bluetooth specifications: Ver. 1.1, or higher (recommended: Ver. 2.1 + EDR or higher) ● Following Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (recommended: Ver.
Page 381 ® 5-10. Bluetooth Certification ■...
Page 382 ® 5-10. Bluetooth...
Page 383 ® 5-10. Bluetooth...
Page 384 ® 5-10. Bluetooth...
Page 385 ® 5-10. Bluetooth WARNING ■ Caution while driving Observe the following precautions to avoid an accident that could result in death or serious injuries. ● Do not use a cellular phone. ® ● Do not connect Bluetooth device or operate the controls. ■...
Page 386 ® 5-10. Bluetooth...
Page 387: Interior Features
Interior features 6-1. Using the air conditioning 6-3. Using the storage features system and defogger List of storage features ..408 Manual air conditioning • Glove box ......409 system ......388 • Console box ....410 Automatic air conditioning • Overhead console ..410 system ......394 •...
Page 388: System
6-1. Using the air conditioning system and defogger ∗ Manual air conditioning system Control panel Vehicles without windshield wiper de-icer Vehicles without power heater :This switch is also installed on vehicles that do not have an air conditioning system. Even though the switch indicator will start to blink when the button is pressed, no system will operate.
Page 389 6-1. Using the air conditioning system and defogger Adjusting the temperature setting (vehicles without air condi- ■ tioning system) Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). This system will supply only ambient temperature air if the dial is turned counterclockwise (cool).
Page 390: Other Functions
6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time the button is pressed. Defogging the windshield ■...
Page 391 6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected air flow mode. Adjusting the position of and opening and closing the air out- ■ lets Center outlets Right and left side outlets Direct air flow to the left or right, up or down.
Page 392 6-1. Using the air conditioning system and defogger ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the windshield effectively.
Page 393 6-1. Using the air conditioning system and defogger ■ When an odor comes from the air conditioning system while the engine is stopped due to the Stop & Start system (vehicles with Stop & Start system) Press the Stop & Start cancel switch to restart the engine. ■...
Page 394: Automatic Air Conditioning System
6-1. Using the air conditioning system and defogger ∗ Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Control panel The illustration below is for left-hand drive vehicles. The button posi- tions are reversed for right-hand drive vehicles. Vehicles without windshield wiper de-icer Vehicles without power heater ∗...
Page 395 6-1. Using the air conditioning system and defogger Adjusting the temperature setting ■ Turning to the right increases the temperature and turning the knob to the left decreases the temperature. The temperature for the driver’s and front passenger’s seats can be set separately.
Page 396 6-1. Using the air conditioning system and defogger Using the automatic mode Press The air conditioning system will begin to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting. Adjust the temperature setting. Automatic mode indicator ■...
Page 397 6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time the button is pressed. Defogging the windshield ■...
Page 398 6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected air flow mode. Adjusting the position of and opening and closing the air out- ■ lets Center outlets Right and left side outlets Direct air flow to the left or right, up or down.
Page 399 6-1. Using the air conditioning system and defogger ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the windshield effectively.
Page 400 6-1. Using the air conditioning system and defogger ■ When an odor comes from the air conditioning system while the engine is stopped due to the Stop & Start system (vehicles with Stop & Start system) Press the Stop & Start cancel switch to restart the engine. ■...
Page 401: Power Heater
6-1. Using the air conditioning system and defogger ∗ Power heater This feature is used to keep the cab warm in cold conditions. On/off The power heater turns on about 30 seconds after you press the switch and it takes about another 55 seconds to warm up.
Page 402 ● Do not modify or open the heater without consulting any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. This may cause a heater malfunction or a fire.
Page 403: Seat Heaters
6-1. Using the air conditioning system and defogger ∗ Seat heaters Left-hand drive vehicles: For driver’s seat Right-hand drive vehicles: For front passenger’s seat Left-hand drive vehicles: For front passenger’s seat Right-hand drive vehicles: For driver’s seat The indicator light comes on. Adjusts the seat temperature The further you turn the dial upward, the warmer the seat becomes.
Page 404 6-1. Using the air conditioning system and defogger NOTICE ● Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat. ● To prevent battery discharge, do not use the seat heater when the engine is off.
Page 405: Using The Interior Lights
6-2. Using the interior lights Interior lights list Personal lights (→P. 406) Personal/interior lights (→P. 406) Engine switch light (if equipped) Foot lights (if equipped) Tray illumination Front door courtesy lights...
Page 406: Personal/Interior Light Main Switch
6-2. Using the interior lights Personal/interior light main switch Vehicles without intrusion sen- Vehicles with intrusion sensor Door position The personal/interior lights come on when a door is opened. They turn off when the doors are closed. “OFF” The personal/interior lights can be individually turned on or off. Personal/interior lights On/off The personal/interior lights turn on/...
Page 407 6-2. Using the interior lights ■ Illuminated entry system Vehicles without smart entry & start system The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are open/ closed. Vehicles with smart entry & start system The lights automatically turn on/off according to engine switch mode, the presence of the electronic key, whether the doors are locked/unlocked, and whether the doors are open/closed.
Page 408: 6-3. Using The Storage Features
6-3. Using the storage features List of storage features Coin box Cup holders Overhead console Console box Glove box Cup holders Bottle holders : If equipped WARNING ● Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: •...
Page 409: Glove Box
6-3. Using the storage features Glove box Left-hand drive vehicles Pull up the lever to open the glove box. Right-hand drive vehicles The glove box can be opened by pulling the lever, locked and unlocked by using the key. Open Lock Unlock The glove box light turns on when the tail lights are on.
Page 410: Console Box
6-3. Using the storage features Console box Vehicles with console box lid: Pull up the lever to release the lock. Slide the armrest. Pull up the lever and lift the armrest to open. Overhead console (if equipped) Push the lid. The overhead console is useful for temporarily storing small items.
Page 411: Cup Holders/Bottle Holders
6-3. Using the storage features Cup holders/bottle holders Cup holders ■ Front type A Front type B Vehicles with cup holder lid: Open Vehicles with console box lid: the cup holder lid. Slide the armrest. Rear (if equipped) Pull down the armrest and open the lid.
Page 412 6-3. Using the storage features ■ The front cup holder (type B) can be moved The position can be altered by sliding back and forth. ■ When storing a bottle in the bottle holder ● Close the cap. ● The bottle may not be stored depending on its size or shape. WARNING ●...
Page 413: Coin Box
6-3. Using the storage features Coin box Pull up the lever.
Page 414: Trunk Features (Sedan)
6-3. Using the storage features Trunk features (sedan) Cargo hooks (if equipped) Cargo hooks are provided for securing loose items. WARNING To avoid injury, always return the cargo hooks to their positions when not in use. First-aid kit storage belt...
Page 415 6-3. Using the storage features Luggage mat Pull the lever upwards when lift- ing the luggage mat up. The lever can be hooked on the edge of the trunk. NOTICE Do not leave the luggage mat lever hooked on the edge of the trunk. The luggage mat may get damaged.
Page 416: Luggage Compartment Features (Wagon)
6-3. Using the storage features Luggage compartment features (wagon) Cargo hooks (if equipped) Raise the hooks to use. Cargo hooks are provided for securing loose items. Vehicles without deck rail Vehicles with deck rail ■ The cargo hooks can be moved (vehicles with deck rail) Pushing and holding the center switch allows the cargo hooks to be moved for- wards and backwards.
Page 417 6-3. Using the storage features Auxiliary box Front Lift the front deck board. Rear Pull the lever upwards when lift- ing the rear deck board. Press down the rear deck board. Side Lift the left or right side deck board.
Page 418 6-3. Using the storage features WARNING ■ When opening/removing the deck boards Do not place anything on the deck boards when opening/closing them. Oth- erwise, your fingers may be caught or an accident may result causing inju- ries. ■ While driving Do not drive with any of the deck boards opened.
Page 419 6-3. Using the storage features Removing the luggage cover ■ The luggage cover can be removed by following the procedure below. Pull the release lever Lift up ■ Stowing the luggage cover (vehicles without deck rail) Remove the side deck boards and open the rear deck board.
Page 420 6-3. Using the storage features WARNING ■ When installing/stowing the luggage cover Make sure that the luggage cover is securely installed/stowed. Failure to do so may result in serious injury in the event of sudden braking or a collision. ■ Caution for the luggage cover ●...
Page 421 6-3. Using the storage features Removing the separation net The separation net can be removed by following the procedure below. Push the release button Lift up ■ Stowing the separation net (vehicles without deck rail) Remove the side deck boards and open the rear deck board.
Page 422 6-3. Using the storage features WARNING ■ When using the separation net Make sure that the hooks are engaged in the correct position on the anchors. Fail- ure to do so may result in serious injury in the event of sudden braking or a colli- sion.
Page 423: Using The Other Interior Features
6-4. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirror Slide the cover to open.
Page 424: Power Outlet
6-4. Using the other interior features Power outlet Please use as a power supply for electronic goods that use less than 12 V DC / 10 A (power consumption of 120 W). ■ The power outlet can be used when The engine switch is in the “ACC”...
Page 425: Armrest
6-4. Using the other interior features Armrest Fold down the armrest for use. NOTICE To prevent damage to the armrest, do not apply too much load on the arm- rest.
Page 426: Trunk/Luggage Compartment Storage Extension
6-4. Using the other interior features Trunk/luggage compartment storage extension (if equipped) Long objects can be loaded in the vehicle by utilizing the trunk/lug- gage compartment space and rear seat area. Fold down the armrest. Open the trunk/luggage com- partment door cover. WARNING Ensure that the trunk/luggage compartment door is closed when not in use.
Page 427: Panoramic Roof Shade
6-4. Using the other interior features Panoramic roof shade (wagon) (if equipped) Use the overhead switches to open or close the panoramic roof shade. Close To stop partway, press the switch lightly. Open To stop partway, press the switch lightly. ■...
Page 428 6-4. Using the other interior features WARNING ■ When closing the panoramic roof shade Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their bod- ies in a position where they could be caught when the panoramic roof shade is being operated.
Page 429: Coat Hooks
6-4. Using the other interior features Coat hooks The coat hooks are provided with the rear assist grips. WARNING Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury.
Page 430 6-4. Using the other interior features...
Page 431: Maintenance And Care
Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior ....432 Cleaning and protecting the vehicle interior ....436 7-2. Maintenance Maintenance requirements....439 7-3. Do-it-yourself maintenance Do-it-yourself service precautions ......442 Hood ........446 Positioning a floor jack..448 Engine compartment..449 Tires........464 Tire inflation pressure ..482 Wheels.......484...
Page 432: Vehicle Exterior
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 433 7-1. Maintenance and care ■ Aluminum wheels (if equipped) ● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical clean- ers. Use the same mild detergent and wax as used on the paint. ●...
Page 434 7-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
Page 435 7-1. Maintenance and care NOTICE ■ When using a high pressure car wash Do not bring the nozzle tip close to following parts and boots (rubber or resin manufactured cover), or connectors. Parts may be damages if they come into contact with high pressure water. ●...
Page 436: Cleaning And Protecting The Vehicle Interior
7-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 437 7-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 438 When cleaning the inside of the windshield (vehicles with Toyota Safety Sense system) Be careful not to touch the front sensor (→P. 270). If the camera is accidentally scratched or hit, Toyota Safety Sense system may not operate properly or may cause a malfunction. ■...
Page 439: Maintenance
Scheduled maintenance Scheduled maintenance be performed at specified intervals according to the maintenance schedule. For full details of your maintenance schedule, read the “Toyota Service Booklet” or “Toyota Warranty Booklet”. Do-it-yourself maintenance What about do-it-yourself maintenance? Many maintenance items are easy to do yourself if you have a little mechanical ability and a few basic automotive tools.
Page 440 ● Engine coolant temperature continually higher than normal If you notice any of these clues, take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, as soon as possible. Your vehicle may need adjustment or repair.
Page 441 7-2. Maintenance WARNING ■ If your vehicle is not properly maintained It could result in serious damage to the vehicle and possible personal injury or death. ■ Handling of the battery Battery posts, terminals and related accessories contain lead and lead com- pounds which are known to cause brain damage.
Page 442: Precautions
(→P. 459) • Conventional wrench (for terminal clamp bolts) Gasoline engine • Toyota Super Long Life Coolant or similar high qual- ity ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology. Toyota Super Long Life Coolant is pre-mixed with 50% coolant and 50% deionized water.
Page 443 7-3. Do-it-yourself maintenance Items Parts and tools • Bulb with same number and wattage rating as origi- Light bulbs • Phillips-head screwdriver (→P. 497) • Flathead screwdriver • Wrench Radiator, condenser and  intercooler (→P. 459) Tire inflation pressure • Tire pressure gauge •...
Page 444 7-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing, and tools away from the moving fan and engine drive belt.
Page 445 7-3. Do-it-yourself maintenance NOTICE ■ If you remove the air cleaner filter Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air. ■ If the brake fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high.
Page 446: Hood
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Lift the hood catch tab and lift the hood. Hold the hood open by inserting the supporting rod into the slot.
Page 447 7-3. Do-it-yourself maintenance WARNING ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 448: Positioning A Floor Jack
7-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.
Page 449: Engine Compartment
7-3. Do-it-yourself maintenance Engine compartment Gasoline engine Washer fluid tank (→P. 462) Battery (→P. 459) Engine coolant reservoir Fuse box (→P. 492) (→P. 457) Electric cooling fan Engine oil filler cap (→P. 454) Condenser (→P. 459) Engine oil level dipstick Radiator (→P.
Page 450 7-3. Do-it-yourself maintenance Diesel engine Washer fluid tank (→P. 462) Fuse box (→P. 492) Engine coolant reservoir Battery (→P. 459) (→P. 457) Electric cooling fans Engine oil filler cap (→P. 454) Condenser (→P. 459) Engine oil level dipstick Intercooler (→P. 459) (→P.
Page 451 7-3. Do-it-yourself maintenance Engine compartment cover Removing the engine compartment cover ■ Installing the clips ■ Rotate center portion Push up center portion Insert Press NOTICE ■ After installing an engine compartment cover Make sure that the cover is securely installed in its original position.
Page 452 7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 453 7-3. Do-it-yourself maintenance Holding a rag under the end, pull the dipstick out and check the oil level. Normal Excessive Flat dipstick Non-flat dipstick type A Measuring side Non-flat dipstick type B The shape of the dipstick may differ depending on the type of vehicle or engine Wipe the dipstick and reinsert it fully.
Page 454 7-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 455 7-3. Do-it-yourself maintenance ■ After changing the engine oil (diesel engine) The engine oil maintenance data should be reset. Perform the following pro- cedures: Switch the display to the maintenance required information (→P. 107), when the engine switch is in the “ON” position (vehicles without smart entry &...
Page 456 Be sure the engine oil filler cap is properly tightened. ■ Engine oil (diesel engine) Using engine oil other than “Toyota Genuine Motor Oil 5W-30 Premium Fuel Economy for 1WW/2WW engines” or any of the approved engine oils may damage the engine.
Page 457: Engine Coolant
7-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. Reservoir cap “FULL” “LOW” Gasoline engine Diesel engine If the level is on or below the “LOW” line, add coolant up to the “FULL” line.
Page 458 Visually check the radiator, hoses, engine coolant reservoir cap, drain cock and water pump. If you cannot find a leak, have any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, test the cap and check for leaks in the cooling system.
Page 459 If any of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional.
Page 460 N (manual transmission). Open and close any of the doors. Restart the engine. ■ When replacing the battery A proper battery should be used. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 461 7-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near battery: ●...
Page 462 7-3. Do-it-yourself maintenance NOTICE ■ When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. Washer fluid If the fluid level is extremely low, add washer fluid. Raise the cap keeping your finger pressed down on the hole in the center and check the fluid level in the tube.
Page 463 Fuel filter (diesel engine) The water in the fuel filter needs to be drained every 20000 km (12000 miles). Have the fuel filter drained by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. NOTICE ■...
Page 464: Tires
7-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, such as excessive wear on one side of the tread.
Page 465 With full-size spare tire (vehicles without tire pressure warning sys- tem) Rotate the tires in the order shown. To equalize tire wear and help extend tire life, Toyota recom- mends that you rotate your tires Front approximately every 10000 km (6000 miles).
Page 466 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. (→P. 468) ◆...
Page 467 7-3. Do-it-yourself maintenance How to initialize the tire pressure warning system ■ Park the vehicle in a safe place and turn the engine switch to the “LOCK” position (vehicles without smart entry & start system) or off (vehicles with smart entry & start system). Initialization cannot be performed while the vehicle is moving.
Page 468 The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 469 Your vehicle is equipped with tire pressure warning system with the function to have ID codes registered for a second wheel set, for example a winter set, by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 470 7-3. Do-it-yourself maintenance Press and hold the “DISP” switch while the cursor is on “CHANGE” to switch to the other registered wheel set. If operation is completed, the tire pressure warning light will blink 3 times. Initialize the tire pressure warning system. (→P. 466) Vehicles with color display Press of the meter control switch to select...
Page 471 A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 472 ● In the following cases, the tire pressure warning system may not operate properly. • If non-genuine Toyota wheels are used. • A tire has been replaced with a tire that is not an OE (Original Equipment) tire. • A tire has been replaced with a tire that is not of the specified size.
Page 473 If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 474 7-3. Do-it-yourself maintenance ■ Certification for tire pressure warning system...
Page 475 7-3. Do-it-yourself maintenance...
Page 476 7-3. Do-it-yourself maintenance...
Page 477 7-3. Do-it-yourself maintenance...
Page 478 7-3. Do-it-yourself maintenance...
Page 479 7-3. Do-it-yourself maintenance...
Page 480 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 481 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or other qualified service shop as soon as possible.
Page 482: Tire Inflation Pressure
● Reduced safety ● Damage to the drive train If a tire needs frequent inflating, have it checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 483 7-3. Do-it-yourself maintenance WARNING ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: ●...
Page 484: Wheels
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 485 ■ When replacing wheels (vehicles with the tire pressure warning system) The wheels of your Toyota are equipped with tire pressure warning valves and transmitters (except for spare tire) that allow the tire pressure warning system to provide advance warning in the event of a loss in tire inflation pres- sure.
Page 486 Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional or other qualified service shop. In addition, make sure to...
Page 487: Air Conditioning Filter
7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Turn the engine switch to the “LOCK” position (vehicles without smart entry & start system) or off (vehicles with smart entry & start system).
Page 488 Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Toyota Service Booklet” or “Toyota Warranty Booklet”.) ■ If air flow from the vents decreases dramatically The filter may be clogged.
Page 489: Wireless Remote Control/Electronic Key Battery
7-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is discharged. You will need the following items: ● Flathead screwdriver ● Small Phillips-head screwdriver ● Lithium battery Vehicles without smart entry & start system: CR2016 Vehicles with smart entry &...
Page 490 7-3. Do-it-yourself maintenance Remove the depleted battery. Insert a new battery with the “+” terminal facing up. Vehicles with smart entry & start system Take out the mechanical key. Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag.
Page 491 Vehicles without smart entry & start system: CR2016 Vehicles with smart entry & start system: CR1632 ● Batteries can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, local electrical appliance shops or camera stores.
Page 492: Checking And Replacing Fuses
7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the engine switch to the “LOCK” position (vehicles without smart entry &...
Page 493 7-3. Do-it-yourself maintenance Driver’s side instrument panel: type B fuse box (left-hand drive vehicles) Remove the coin box. Passenger’s side instrument panel: type A fuse box (right-hand drive vehicles) Remove the cover. Remove the lid.
Page 494 7-3. Do-it-yourself maintenance Passenger’s side instrument panel: type B fuse box (right-hand drive vehicles) Open the glove box. Slide off the damper. Push in each side of the glove box to disconnect the claws. Remove the fuse with the pull- out tool.
Page 495 Replace it with one of an appropriate amperage rating. The amper- age rating can be found on the fuse box lid. Type C and D Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Type A...
Page 496 (→P. 497) ● If the replaced fuse blows again, have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. ■ If there is an overload in the circuits The fuses are designed to blow, protecting the wiring harness from damage.
Page 497: Light Bulbs
As there is a danger that components may be damaged, we recommend that replacement is carried out by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced.
Page 498 7-3. Do-it-yourself maintenance Rear ■ Sedan Rear turn signal light Back-up light (right-hand drive vehicles) Back-up light (left-hand drive vehicles) License plate lights Wagon Rear turn signal light Back-up light (right-hand drive vehicles) Back-up light (left-hand drive vehicles) License plate lights...
Page 499 7-3. Do-it-yourself maintenance Replacing light bulbs Headlights (halogen bulbs) ■ right side only: Remove the securing clip and turn and pull off the washer fluid filler opener. For the left side only: Remove the securing clip and the upper part of the air cleaner duct (if it is remov- able).
Page 500 7-3. Do-it-yourself maintenance Replace the light bulb, set the connector and install the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. Shake the bulb base gently to check that it is not loose, turn the headlight low beam on once and visually confirm that no light...
Page 501 7-3. Do-it-yourself maintenance Front fog light (if equipped) ■ Remove the fender liner bolts. Partly remove fender liner. Unplug the connector while pushing the lock release. Turn the bulb base counter- clockwise. Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert.
Page 502 7-3. Do-it-yourself maintenance Turn and secure the bulb base. Set the connector. Shake the bulb base gently to check that it is not loose, turn the front fog light on once and visually confirm that no light is leaking through the mounting. Reinstall the fender liner with bolts by conducting in reverse.
Page 503 7-3. Do-it-yourself maintenance Turn the bulb base counter- clockwise. Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. Set the connector. Shake the bulb base gently to check that it is not loose, turn the cornering/fog light on once...
Page 504 7-3. Do-it-yourself maintenance Front turn signal light ■ For the left side only: Remove the securing clip and the upper part of the air cleaner duct (if it is remov- able). Turn the bulb base counter- clockwise. Remove the light bulb. When installing the bulb, reverse the steps in reverse.
Page 505 7-3. Do-it-yourself maintenance Back-up light (sedan) ■ For the right side, open the trunk and remove the cover clips and the trunk grip. For the left side, open the trunk and remove the cover clips. Partly remove the trunk panel cover and turn the bulb base counterclockwise.
Page 506 7-3. Do-it-yourself maintenance Back-up light (wagon) ■ Open the back door and remove the cover. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 507 7-3. Do-it-yourself maintenance Rear turn signal light (sedan) ■ Open the trunk and remove the cover. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 508 7-3. Do-it-yourself maintenance Rear turn signal light (wagon) ■ Open the back door and remove the cover. Turn the bulb bases counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 509 7-3. Do-it-yourself maintenance License plate light ■ Remove the cover. Insert a flathead screwdriver or similar into the hole and remove it as shown in the illustration. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Remove the light bulb.
Page 510 7-3. Do-it-yourself maintenance Remove the socket from the side turn signal light housing. Remove the bulb. Replace the bulb and install the socket to the side turn signal light housing. Align the grooves of the socket to the side turn signal light hous- ing.
Page 511 LEDs. If any of the LEDs burn out, take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional to have the light...
Page 512 7-3. Do-it-yourself maintenance WARNING ■ Replacing light bulbs ● Turn off the headlights. Do not attempt to replace the bulb immediately after turning off the headlights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
Page 513: When Trouble Arises
When trouble arises 8-1. Essential information 8-2. Steps to take in an emergency Emergency flashers...514 If your vehicle needs to If your vehicle has to be towed ......517 be stopped in an emergency.......515 If you think something is wrong.......524 Fuel pump shut off system (gasoline engine) .....525 If a warning light turns on or a warning buzzer...
Page 514: 8-1. Essential Information
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 515: If Your Vehicle Has To Be Stopped In An Emergency
8-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 516 8-1. Essential information Vehicles with smart entry & start system: stop engine, press and hold the engine switch for 2 consecutive seconds or more, or press it briefly 3 times or more in suc- Press and hold for 2 seconds or more, or press briefly cession.
Page 517: Steps To Take In An Emergency If Your Vehicle Needs To Be Towed
Situations when it is necessary to contact dealers before towing The following may indicate a problem with your transmission. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or commercial towing service before towing. ● The engine is running, but the vehicle does not move.
Page 518 8-2. Steps to take in an emergency Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck From the front From the rear Release the parking brake. Use a towing dolly under the front wheels.
Page 519 8-2. Steps to take in an emergency Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. Use wheel chocks for front tires to prevent the vehicle from rolling. Secure the vehicle by strapping the tires to the deck of the tow truck as shown.
Page 520 8-2. Steps to take in an emergency Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing eyelets or hooks. This should only be attempted on hard sur- faced roads for at most 80 km (50 miles) at under 30 km/h(18 mph).
Page 521 8-2. Steps to take in an emergency Insert the towing eyelet into the hole and tighten partially by hand. Insert a wheel nut wrench or hard metal bar into the towing eyelet parallel to the front bumper surface. To prevent damaging the vehicle, cover the ends of the wheel nut wrench or hard metal bar with rags, tapes, etc.
Page 522 8-2. Steps to take in an emergency ■ While towing If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult. ■ Wheel nut wrench Wheel nut wrench is installed in the trunk or luggage compartment. (→P.
Page 523 8-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle when towing using a wheel-lift type truck ● Vehicles without smart entry & start system: Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed.
Page 524: If You Think Something Is Wrong
If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional, as soon as possible.
Page 525: Fuel Pump Shut Off System (Gasoline Engine)
8-2. Steps to take in an emergency Fuel pump shut off system (gasoline engine) To minimize the risk of fuel leakage when the engine stalls or an airbag inflates upon collision, the fuel pump shut off system stops supplying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 526: If A Warning Light Turns On Or A Warning Buzzer Sounds
However, if this continues to occur, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Warning light and warning buzzer list...
Page 527 ABS warning light Indicates a malfunction in: • The ABS; or • The brake assist system → Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. Brake system warning light (yellow indicator) Indicates a malfunction in the electric parking brake →...
Page 528 “AFS OFF” indicator (if equipped) Indicates a malfunction in the AFS (Adaptive Front-lighting System). (Flashes) → Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. Stop & Start cancel indicator (if equipped) Indicates a malfunction in the Stop &...
Page 529 When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system (→P. 531) → Have the system checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 530 8-2. Steps to take in an emergency ■ Electric power steering system warning light (warning buzzer) When the battery charge becomes insufficient or the voltage temporarily drops, the electric power steering system warning light may come on and the warning buzzer may sound. ■...
Page 531 “ON” position (vehicles with- out smart entry & start system) or IGNITION ON mode (vehicles with smart entry & start system), have it checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 532 Check the tires. If a tire is flat, change it with the spare tire and have the flat tire repaired by the nearest authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 533: If A Warning Message Is Displayed
Multi-information display If any of the warning light comes on again after the following actions have been performed, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Warning message and warning buzzer list...
Page 534 Indicates a malfunction in the brake system → Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. Continuing to drive the vehicle may be dan- gerous.
Page 535 Details/Actions Indicates a malfunction in the PCS (Pre-Crash Safety system) A buzzer also sounds. → Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. (Flashes) (If equipped) Indicates a malfunction in the Stop & Start system A buzzer also sounds.
Page 536 Indicates a malfunction in the RSA (Road Sign Assist) A buzzer also sounds. → Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional. (If equipped) Indicates a malfunction in the clutch switch A buzzer also sounds.
Page 537 Indicates a malfunction in the electric parking brake system A buzzer also sounds. → Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional. (Yellow) Indicates a malfunction in the EPS (Electric Power Steering) system A buzzer also sounds.
Page 538 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the parking brake is not engaged When the engine switch is turned off while the vehicle is not at standstill, a message is dis- played and a buzzer sounds twice to indicate that the parking brake is not engaged.
Page 539 DPF system has reached the specified level. Regenerate the filter → P. 543 (Diesel engine) Indicates a malfunction in the DPF system → Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. (Diesel engine)
Page 540 Details/Actions Indicates that the pre-crash safety system is dis- abled. → Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional. (Flashes) (If equipped) Indicates that, since the VSC (Vehicle Stability...
Page 541 • The LED headlight system (if equipped); A buzzer also sounds. → Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional. Indicates that: • There is a high possibility of a frontal collision;...
Page 542 8-2. Steps to take in an emergency Warning message Details/Actions The system is temporarily canceled because the operating conditions of the front sensor (tempera- ture, etc.) are not met. The following systems may be suspended: • PCS (Pre-Crash Safety system) (if equipped); •...
Page 543 The warning message will disappear when regeneration is complete. How- ever, if this driving cannot be carried out, or if the message does not disap- pear even after driving, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional imme- diately.
Page 544 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer electronic detected when an attempt is  Once made to start the engine. → Confirm the location of the electronic key. (Flashes) The electronic key was carried outside the vehicle and a door other than the driver’s door was opened and closed while the...
Page 545 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer An attempt was made to start the engine without the elec- tronic key being present, or the electronic key was not function- ing normally.  Once An attempt was made to drive when the regular key was not inside the vehicle.
Page 546 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer An attempt was made to lock the doors using the smart entry & start system while the elec- tronic key was still inside the vehicle. → Retrieve the electronic key from the vehicle and lock the doors again.
Page 547 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer • When doors were unlocked with the mechanical key and then the engine switch was pressed, the elec- tronic could detected in the vehicle. • The electronic key could not be detected in the vehicle (Multidrive) ...
Page 548 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer An attempt was made to turn the engine switch off when the shift lever was not in P.  → To turn off the engine, first Once shift the shift lever to P and then turn the engine...
Page 549 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The driver’s door was opened and closed with the engine switch turned off and then the engine switch ACCESSORY mode twice with- out the engine being started. →...
Page 550: If You Have A Flat Tire (Vehicles With Spare Tire)
8-2. Steps to take in an emergency If you have a flat tire (vehicles with spare tire) Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: →P. 464 WARNING ■...
Page 551 8-2. Steps to take in an emergency Location of the spare tire, jack and tools (sedan) Vehicles with compact spare tire Towing eyelet Spare tire Jack Wheel nut wrench Jack handle Parking brake release tool Vehicles with full-size spare tire Jack Jack handle Towing eyelet...
Page 552 8-2. Steps to take in an emergency Location of the spare tire, jack and tools (wagon) Vehicles with compact spare tire Rear auxiliary box Wheel nut wrench Jack handle Parking brake release tool Spare tire Towing eyelet Jack Vehicles with full-size spare tire Rear auxiliary box Towing eyelet Jack handle...
Page 553 8-2. Steps to take in an emergency WARNING ■ Using the tire jack Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or install- ing and removing tire chains.
Page 554 8-2. Steps to take in an emergency Taking out the jack (sedan) Lift up the hook of the panel on the trunk floor. Secure the panel using the hook provided. Vehicles with full-size spare tire: Unhook the tightening strap and remove the jack. After storing the jack, make sure it is securely held by the tightening strap.
Page 555 8-2. Steps to take in an emergency Remove the rear auxiliary box. Vehicles with full-size spare tire: Unhook the tightening strap and remove the jack. After storing the jack, make sure it is securely held by the tightening strap. Taking out the spare tire (sedan) Vehicles with compact spare tire Loosen the center fastener that secures the spare tire.
Page 556 8-2. Steps to take in an emergency Taking out the spare tire (wagon) Vehicles with compact spare tire Loosen the center fastener that secures the spare tire. Vehicles with full-size spare tire Loosen the center fastener that secures the spare tire and tool box.
Page 557 8-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Sedan Wagon Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side...
Page 558 8-2. Steps to take in an emergency Turn the tire jack portion by hand until the notch of the jack is in contact with the jack point. Sedan Wagon Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire.
Page 559 8-2. Steps to take in an emergency WARNING ■ Replacing a flat tire ● Observe the following precautions. Failure to do so may result in serious injury: • Do not try to remove the wheel ornament by hand. Take due care in handling the ornament to avoid unexpected personal injury.
Page 560 8-2. Steps to take in an emergency Install the tire and loosely tighten each wheel nut by hand by approximately the same amount. Replacing a steel wheel with a steel wheel (including a compact spare tire) Tighten the nuts until the tapered Tapered portion portion comes into loose contact with the disc wheel sheet.
Page 561 8-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each nut two or three times in the order shown in the illustration. Tightening torque: 103 N•m (10.5 kgf•m, 76 ft•lbf) Vehicles with full wheel orna- ment, reinstall the wheel orna- ment.
Page 562 8-2. Steps to take in an emergency ■ The full-size spare tire ● On vehicles with a tire pressure warning system, the full-size spare tire has a “Temporary use only” label on the outer surface of the wheel. Use the full-size spare tire temporarily, and only in an emergency. ●...
Page 563 8-2. Steps to take in an emergency ■ Certification for the jack...
Page 564 8-2. Steps to take in an emergency WARNING ■ When using the compact spare tire ● Remember that your compact spare tire is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. ●...
Page 565 When replacing the tires When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as the tire pressure warning valve and transmitter may be damaged if not handled correctly.
Page 566: Puncture Repair Kit
(→P. 576) After temporarily repairing the tire with the kit, have the tire repaired or replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Repairs conducted using the emergency tire puncture repair kit are only a temporary measure.
Page 567 Jack* : Use of the jack and wheel nut wrench. (if equipped) (→P. 557) A jack and wheel nut wrench can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. : Use of the wheel cap clip. (if equipped) (→P. 485)
Page 568 Rear auxiliary box : Use of the jack and wheel nut wrench. (if equipped) (→P. 557) A jack and wheel nut wrench can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. : Use of the wheel cap clip. (if equipped) (→P. 485)
Page 569 8-2. Steps to take in an emergency Emergency tire puncture repair kit components Nozzle Hose Stickers Compressor switch Pressure release button Air pressure gauge Power plug Before performing emergency repair Check the degree of the tire dam- age. Do not remove the nail or screw from the tire.
Page 570 Remove any dirt and moisture from the wheel before attaching the label. If it is impossible to attach the label, make sure to tell any authorized Toyota dealer repairer, or other duly qualified and equipped professional when you have them repair and replace the tire that sealant is injected.
Page 571 8-2. Steps to take in an emergency Connect the nozzle to the valve. Screw the end of the nozzle clock- wise as far as possible. The bottle should hang vertically without contacting the ground. If the bottle does not hang vertically, move the vehicle so that the tire valve is located properly.
Page 572 8-2. Steps to take in an emergency Make sure that the compressor switch is off. Remove the power plug from the compressor. Connect the power plug to the power outlet socket. (→P. 424) Check the specified tire inflation pressure. Tire inflation pressure is specified on the label as shown. Left-hand drive vehicles Right-hand drive vehicles Start the vehicle’s engine.
Page 573 35 minutes with the switch on, the tire is too damaged to be repaired. Turn the compressor switch off and contact authorized Toyota dealer or repairer, or another duly qualified equipped profes- sional. • If the tire inflation pressure exceeds the specified air pressure,...
Page 574 8-2. Steps to take in an emergency Turn the compressor off. Disconnect the nozzle from the valve on the tire and then pull out the power plug from the power outlet socket. Some sealant may leak when the nozzle is removed. Press the button to release pressure from the bottle.
Page 575 Taking precautions to avoid sudden braking, sudden acceleration and sharp turns, drive carefully at under 80 km/h (50 mph) to the nearest authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional for tire repair or replacement.
Page 576 The sealant stored in the emergency tire puncture repair kit can be used only once to temporarily repair a single tire. If the sealant has been used and needs to be replaced, purchase a new bottle at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. The compressor is reusable.
Page 577 8-2. Steps to take in an emergency ■ If the tire is inflated to more than the specified air pressure Press the button to let some air out. Check that the air pressure indicator shows the specified air pressure. If the air pressure is under the designated pressure, turn the compressor switch on again and repeat the inflation procedure until the specified air pressure is reached.
Page 578 8-2. Steps to take in an emergency WARNING ■ Caution while driving ● The repair kit is exclusively only for your vehicle. Do not use repair kit on other vehicles, which could lead to an accident causing death or serious injury. ●...
Page 579 8-2. Steps to take in an emergency WARNING ■ When fixing the flat tire ● After inflation of the tire has completed, the sealant may splatter when the hose is disconnected or some air is let out of the tire. ●...
Page 580 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. After use of liquid sealant, make sure to replace the tire pressure warning valve and transmitter when repair- ing or replacing the tire.
Page 581: If The Engine Will Not Start
8-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (→P. 209, 212), consider each of the fol- lowing points: The engine will not start even though the starter motor operates normally.
Page 582 ● There may be a malfunction in the steering lock system. (vehicles with smart entry & start system) Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, if the problem cannot be repaired, or if repair procedures are unknown.
Page 583: If The Shift Lever Cannot Be Shifted From P
(a system to prevent accidental operation of the shift lever). Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 584: If The Parking Brake Cannot Be Released
If the switch cannot be operated even when the battery is nor- mal, the parking brake system may be malfunctioning. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. Before releasing the parking brake manually ●...
Page 585 8-2. Steps to take in an emergency Releasing the parking brake manually (sedan) Lift the luggage mat. (→P. 415) Take out the parking brake release tool from the trunk. (→P. 551, 567) Turn over the left side floor mat in the trunk. Remove or break the seal cov- ering the releasing hole.
Page 586 8-2. Steps to take in an emergency Releasing the parking brake manually (wagon) Take out the parking brake release tool from the luggage compart- ment. (→P. 552, 567) Lift the left side deck board. (→P. 417) Turn over the luggage box cap. Remove or break the seal cov- ering the releasing hole.
Page 587 8-2. Steps to take in an emergency ■ When the seal is damaged The seal needs to replace by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. If the trunk/luggage compartment has flooded with water when the seal has...
Page 588: If The Electronic Key Does Not Operate Properly
8-2. Steps to take in an emergency If the electronic key does not operate properly For vehicles with smart entry & start system: If communication between the electronic key and vehicle is interrupted (→P. 152) or the electronic key cannot be used because the battery is depleted, the smart entry &...
Page 589 (Multidrive) or clutch pedal (manual trans- mission) depressed. In the event that the engine switch still cannot be operated, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ Stopping the engine Shift the shift lever to P (Multidrive) or N (manual transmission) and press the engine switch as you normally do when stopping the engine.
Page 590 8-2. Steps to take in an emergency ■ Changing engine switch modes Multidrive Within 10 seconds of the buzzer sounding, release the brake pedal and press the engine switch. The engine does not start and modes will be changed each time the switch is pressed.
Page 591: If The Vehicle Battery Is Discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 592 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were connected. Once the engine starts, have the vehicle inspected at any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional, as soon as possible.
Page 593 8-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged (vehicles with Multid- rive) The engine cannot be started by push-starting. ■ To prevent battery discharge ● Turn off the headlights and the audio system while the engine is turned off. ●...
Page 594 If an unsupported battery is used, Stop & Start system functions may be restricted to protect the battery. Also, battery performance may decrease and the engine may not be able to restart. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for details. WARNING ■...
Page 595 8-2. Steps to take in an emergency NOTICE ■ When handling jumper cables When connecting the jumper cables, ensure that they do not become entan- gled in the cooling fans or belt.
Page 596: If Your Vehicle Overheats
Radiator Cooling fan If a large amount of coolant leaks, immediately contact any authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional. The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir.
Page 597 Stop the engine immediately and contact any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional. If the fan is operating: Have the vehicle inspected at the nearest authorized Toyota dealer or repairer, or another duly qualified and equipped professional. WARNING ■...
Page 598 8-2. Steps to take in an emergency NOTICE ■ When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine. ■...
Page 599: If The Vehicle Becomes Stuck
8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. Stop the engine. Set the parking brake and shift the shift lever to P (Multidrive) or N (manual transmission).
Page 600 8-2. Steps to take in an emergency NOTICE ■ To avoid damage to the transmission and other components ● Avoid spinning the wheels and depressing the accelerator pedal more than necessary. ● If the vehicle remains stuck even after these procedures are performed, the vehicle may require towing to be freed.
Page 601: Vehicle Specifications
Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)...602 Fuel information ....622 9-2. Customization Customizable features ..625 9-3. Items to initialize Items to initialize ....634...
Page 602: Specifications Maintenance Data (Fuel, Oil Level, Etc.)
9-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Sedan 4750 mm (187.0 in.) Overall length Wagon 4820 mm (189.8 in.) Overall width 1810 mm (71.3 in.) Overall height 1480 mm (58.3 in.) Wheelbase 2700 mm (106.3 in.) 1560 mm (61.4 in.) Front 1550 mm (61.0 in.)
Page 603 9-1. Specifications Drawbar load 75 kg (165.3 lb.) 1ZR-FAE engine 1400 kg (3086.5 lb.) 2ZR-FAE engine 1600 kg (3527.4 lb.) 1500 kg (3306.9 lb.) 3ZR-FAE engine With brake Towing capacity 1800 kg (3968.3 lb.) 1WW engine 1600 kg (3527.4 lb.) 2WW engine 1800 kg (3968.3 lb.) Without brake...
Page 604 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped under the right-hand front seat.
Page 605: Engine Number
9-1. Specifications Engine number ■ The engine number is stamped on the engine block as shown. Gasoline engine Diesel engine Engine Gasoline engine Model 1ZR-FAE, 2ZR-FAE, 3ZR-FAE Type 4-cylinder in line, 4-cycle, gasoline 1ZR-FAE engine 80.5 × 78.5 mm (3.17 × 3.09 in.) 2ZR-FAE engine Bore and stroke 80.5 ×...
Page 606 9-1. Specifications 7.6  10.0 mm (0.30  0.39 in.) Generator Water pump Crankshaft 1ZR-FAE Drive belt conditioning tension compressor : Drive belt deflection with 98 N (10 kgf, 22 lbf) thumb force (used belt) 2ZR-FAE Automatic adjustment 3ZR-FAE Diesel engine Model 1WW, 2WW Type...
Page 607 9-1. Specifications Fuel Gasoline engine EU area: Unleaded gasoline conforming to Euro- Fuel type pean standard EN228 only Except EU area: Unleaded gasoline only Research octane 95 or higher number Fuel tank capacity 60 L (15.9 gal., 13.2 Imp.gal.) (reference) Diesel engine Diesel fuel conforming to European stan- Fuel type...
Page 608: Lubrication System
9-1. Specifications Lubrication system Gasoline engine Oil capacity With filter: 4.2 L (4.4 qt., 3.7 Imp.qt.) (Drain and refill  Without filter: 3.9 L (4.1 qt., 3.4 Imp.qt.) reference : The engine oil capacity is a reference quantity to be used when changing the engine oil.
Page 609 9-1. Specifications Engine oil selection (Except for New Zealand) ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota recommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used.
Page 610 9-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil contain- ers to help you select the oil you should use. API Service Symbol Top portion: “API SERVICE SN” means the oil quality designa- tion by American Petroleum Institute (API).
Page 611 9-1. Specifications Engine oil selection (For New Zealand) ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: 0W-20, 5W-20, 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”...
Page 612 9-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil contain- ers to help you select the oil you should use. API Service Symbol Top portion: “API SERVICE SN” means the oil quality designa- tion by American Petroleum Institute (API).
Page 613 NOTICE ■ To prevent damage to the engine ● Use of engine oils other than “Toyota Genuine Motor Oil 5W-30 Premium Fuel Economy for 1WW/2WW engines” or any other approved engine oil, may cause damage to the engine. ● If the approved oils are not available, up to 1 L (1.1 qt., 0.9 Imp.qt.) of the following oils may be used: ACEA C3 oils.
Page 614: Cooling System
Do not use plain water alone. “Toyota Genuine Premium Long Life Coolant 1WW/ Coolant 2WW” or equivalent. type “Toyota Genuine Premium Long Life Coolant 1WW/ 2WW” concentrated product always needs to be Diesel mixed as 50% coolant and 50% deionized water.
Page 615 9-1. Specifications Ignition system (gasoline engine) Spark plug Make DENSO SC20HR11, SC16HR11 1.1 mm (0.043 in.) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.
Page 616: Electrical System
7.2 L (7.6 qt., 6.3 Imp.qt.) Fluid type Toyota Genuine CVT Fluid FE The fluid capacity is the quantity of reference. If replacement is neces- sary, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. NOTICE ■...
Page 617 Please be aware that depending on the particular characteristics of the gear oil used or the operating conditions, idle sound, shift feeling and/or fuel effi- ciency may be different or affected. Toyota recommends to use “TOYOTA Genuine Manual Transmission Gear Oil LV” to achieve optimal perfor-...
Page 618 9-1. Specifications Clutch 5  15 mm (0.2  0.6 in.) Pedal free play SAE J1703 or FMVSS No. 116 DOT 3 or Fluid type SAE J1704 or FMVSS No. 116 DOT 4 Brakes Pedal clearance Left-hand drive vehicles 83 mm (3.27 in.) Min. Right-hand drive vehicles 71 mm (2.80 in.) Min.
Page 619: Tires And Wheels
9-1. Specifications Tires and wheels 225/45R18 95W Tire size 225/45R18 95W Front wheel Rear wheel Vehicle kPa (kgf/cm kPa (kgf/cm speed or bar, psi) or bar, psi) Tire inflation pressure More than (Recommended cold tire 160 km/h 280 (2.8, 41) 250 (2.5, 36) inflation pressure) (99 mph)
Page 620 9-1. Specifications 205/60R16 92V (Diesel engine) Tire size 205/60R16 92V Front wheel Rear wheel Vehicle kPa (kgf/cm kPa (kgf/cm speed or bar, psi) or bar, psi) Tire inflation pressure More than (Recommended cold tire 160 km/h 270 (2.7, 39) 250 (2.5, 36) inflation pressure) (99 mph) 160 km/h...
Page 621 9-1. Specifications Compact spare tire Tire size T145/70D17 106M Tire inflation pressure (Recommended cold tire 420 kPa (4.2 kgf/cm or bar, 60 psi) inflation pressure) 17 × 4T Wheel size Wheel nut torque 103 N•m (10.5 kgf•m, 76 ft•lbf) Light bulbs Light bulbs Type Headlights (halogen bulbs)
Page 622: Fuel Information
9-1. Specifications Fuel information EU area: Your vehicle must use only unleaded gasoline conforming to European standard EN228. optimum engine performance, select unleaded gasoline with a Research Gasoline engine Octane Number of 95 or higher. Except EU area: Your vehicle must use only unleaded gasoline.
Page 623 9-1. Specifications ■ Fuel tank opening for unleaded gasoline (gasoline engine) To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■ If you plan to drive in foreign countries (diesel engine) Low sulfur diesel fuel may not be available, so please confirm the availability with your distributor.
Page 624 “B30” or “B100” and fuel containing a large amount of FAME should not be used. The use of these fuels will damage the vehi- cle’s fuel system. In case of any doubt, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 625: Customization
The settings of these fea- tures can be changed using navigation system or the multime- dia system, the multi-information display or at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Some function settings are changed simultaneously with other func- tions being customized.
Page 626 9-2. Customization Changing using the multi-information display ■ Vehicles with monochrome display Press the “DISP” switch to display the setting screen while the vehicle is stopped, and then press and hold the “DISP” switch to display the customize mode screen. Press the “DISP”...
Page 627 Settings that can be changed using the multi-information display Settings that can be changed by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional Definition of symbols: O = Available, - = Not available Gauges, meters and multi-information display (→P.
Page 628 9-2. Customization Vehicles with color display Customized Function Default setting setting (Lane Departure High Standard – – Alert) sensitivity RSA (Road Sign Assist) – – AFS (Adaptive Front-light- – – ing System) No notification RSA (Road Sign Assist) set up (Excess speed con- Only visual Visual and dition method)
Page 629 9-2. Customization Customized Function Default setting setting French Spanish German Italian Russian Portuguese Turkish Czech Danish Language English Greek – Hungarian Dutch Norwegian Polish Romanian Slovak Finnish Swedish Ukrainian miles (MPG) km (L/100 km) – Units km (km/L) °C (Celsius) °F (Fahrenheit) –...
Page 630 9-2. Customization Customized Function Default setting setting Distance to – – empty Drive information 2 Average speed – – Stop & Start system – – operation time Drive information 3 Stop & Start system total – – operation time Pop-up display –...
Page 631 9-2. Customization Smart entry & start system (→P. 148) ■ Default Customized Function setting setting Smart entry & start system Wireless remote control (→P. 121) ■ Default Customized Function setting setting Wireless remote control Operation signal (Emergency flashers) Open door reminder buzzer (when locking the vehicle) 60 seconds Time elapsed before auto-...
Page 632 9-2. Customization Automatic light control system (→P. 232) ■ Default Customized Function setting setting Light sensor sensitivity Level 3 Level 1 to 5 seconds Follow me home (Time elapsed before head- seconds seconds lights automatically turn off) seconds : If equipped Illumination (→P.
Page 633 9-2. Customization Turn signal lever (→P. 228) ■ Default Customized Function setting setting Times of flashing of the lane change signal flashers Automatic air conditioning system (→P. 397) ■ On the navigation system or multimedia system, select “Vehicle” on the “Setup” screen and select “Climate control setting”. Default Customized Function...
Page 634: 9-3. Items To Initialize
9-3. Items to initialize Items to initialize The following items must be initialized for normal system opera- tion after such cases as the battery is reconnected, or mainte- nance is performed on the vehicle. Item When to initialize Reference Engine oil mainte- After changing engine oil P.
Page 635: Index
Index What to do if... (Troubleshooting) .....636 Alphabetical index ......640 For vehicles with navigation system or multimedia system, refer to the “Navigation and multimedia system Owner’s manual” for information regarding the equipment listed below. • Navigation system • Audio/video system •...
Page 636 You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. (→P. 122) ● Vehicles with smart entry & start system If you lose your electronic keys, the risk of vehicle theft increases signifi- cantly.
Page 637 What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without smart entry & start system) ● Vehicles with Multidrive Is the shift lever in P? (→P. 209) ● Vehicles with manual transmission Do you turn the key with the clutch pedal depressed firmly? (→P.
Page 638 What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without smart entry & start system It is locked to prevent theft of the vehicle if the key is removed from the engine switch.
Page 639 What to do if... (Troubleshooting) An alarm is activated and the horn sounds (if equipped) ● Did anyone inside the vehicle open a door during setting the alarm? The sensor detects it and the alarm sounds. (→P. 89) To stop the alarm, turn the engine switch to IGNITION ON mode or start the engine.
Page 640: Alphabetical Index
Alphabetical index Alphabetical index Airbags ........39 Airbag manual on-off A/C........388, 394 system ........52 Air conditioning filter....487 Airbag operating Automatic air conditioning conditions ......46 system ........ 394 Airbag precautions for your Manual air conditioning child ........41 system ........
Page 641 Alphabetical index Audio system ......314 Battery Antenna......... 326 Battery checking ....459 Audio input ......355 If the battery is discharged..591 AUX port ....... 355 Preparing and checking ® Bluetooth audio....370 before winter....... 310 ® CD player ......327 Bluetooth ......
Page 642 Alphabetical index Child-protectors....... 136 Cleaning ......432, 436 Care Aluminum wheels....433 Aluminum wheels....433 Exterior ......... 432 Exterior........432 Interior........436 Interior........436 Seat belts......437 Seat belts ......437 Clock......... 105 Cargo capacity ......198 Clutch ........618 Cargo hooks.....
Page 643 Alphabetical index Display Drive information... 108, 112 Electric power steering Fuel consumption Function ........ 304 information......117 Warning light......527 LDA (Lane Departure Warning message....537 Alert) ........271 Electronic key Multi-information Battery-saving function ..152 display ......108, 111 If the electronic key does not Trip information .....
Page 644 Alphabetical index Emergency tire puncture Engine oil maintenance repair kit ......... 566 data......... 455 Engine Engine switch ....209, 212 “ACC” position....... 210 Auto power off function ..216 Accessory mode ....215 Changing the engine switch Before stopping the engine mode ........
Page 645 Alphabetical index Front position lights Light switch ......232 Gas station information ..656 Wattage......... 621 Gauges ........104 Front seats ....... 166 Gear Shift Indicator ....225 Adjustment ......166 Glove box ......... 409 Cleaning........ 436 Glove box light......409 Correct driving posture....
Page 646 Alphabetical index High mounted stoplight Inside rear view mirror .... 176 Replacing ......511 Instrument panel/ Hill-start assist control.... 304 cluster light control..106, 114 Hood.......... 446 Intercooler ........ 459 Warning buzzer.......89 Interior lights......405 Hooks Switch ........406 Cargo hooks....414, 416 Wattage ........
Page 647 Alphabetical index Lock steering column ..210, 216 Luggage compartment Language (multi-information Auxiliary box ......417 display)........627 Cargo hooks ......416 LDA (Lane Departure Alert) ..270 Extending a space ....426 Lever Luggage cover ...... 418 Auxiliary catch lever ....446 Separation net ......
Page 648 Alphabetical index MP3 disc ......... 327 Multidrive........219 Paddle shift switches ..221, 222 Multimedia system Panoramic roof shade Multi-information Jam protection function..427 display Operation ......427 Drive information... 108, 112 Parking brake Language ......627 Operation ......229 LDA (Lane Departure Parking brake engaged Alert) ........
Page 649 Alphabetical index Radiator ........459 Seat belts........34 Radio ........321 Adjusting the seat belt .... 35 Radio data system (RDS) ..325 Child restraint system Rear fog light installation ......64 Replacing light bulbs..... 511 Cleaning and maintaining Switch ........240 the seat belts ......
Page 650 Alphabetical index Sensor Sport mode....... 220 Automatic headlight SRS airbags ....... 39 system ........ 237 Steering lock ....210, 216 Automatic High Beam Steering wheel system ........ 276 Adjustment......174 Inside rear view mirror ..178 Audio switches...... 317 LDA (Lane Departure “DISP”...
Page 651 Alphabetical index Talk switch (Lane Departure Alert)..270 Telephone switch ....362 Light switches ....... 232 Theft deterrent system Meter control switches ..112 Alarm ........89 Outside rear view mirror Double locking system.... 87 switches......179 Engine immobilizer system ..78 Odometer/trip meter button...
Page 652 Emergency towing ....517 USB memory ......347 Towing eyelet......520 USB port ......... 318 Trailer towing ......200 Toyota Safety Sense....251 Traction control ....... 304 Vanity lights Transmission Vanity lights ......423 Driving mode select switch ... 220 Wattage ........ 621 If the shift lever cannot be Vanity mirrors ......
Page 653 Alphabetical index Warning lights Washer ABS........527 Checking....... 462 AFS ........528 Preparing and checking Brake system ....526, 527 before winter....... 310 Electronic engine control Switch ......242, 246 system ........ 526 Washing and waxing ....432 Electric power steering..527 Weight........
Page 654 Alphabetical index...
Page 655 Alphabetical index...
Page 656: Gas Station Information
GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 446 P. 249 Hood lock release Fuel filler door opener Tire inflation pressure lever P. 446 P. 249 P. 619 Fuel tank capacity (Reference) 60 L (15.9 gal., 13.2 Imp.gal.) Fuel type P.

Toyota AVENSIS Manual

1 For Safety and Security

2 Instrument Cluster

4 Driving

5 Audio System

6 Interior Features

7 Maintenance and Care

9 Vehicle Specifications

Quick Links

Pictorial index

specifications

Related Manuals for Toyota AVENSIS

Summary of Contents for Toyota AVENSIS