Connecting The Base Station - Toshiba IP4100 Product Bulletin

Base Station
Base Station

Connecting the Base Station

1. Connect a standard Ethernet cable (Cat 5 or higher) to the Ethernet/PoE jack on the rear of the base
station.
2. Connect the other end of the cable to your TCP/IP network.
3. When the base station powers on, the Status LED on the front briefly lights orange and then turns off
while it initializes and connects to the network. After the base station successfully initializes and
connects to the network, the LED lights green and remains steady on.
2 of 19
Introducing the New IP4100 DECT Telephone!