Table of Contents
Advertisement
Modem Settings
SIEMENS AG
Under "modem", you can set how the
modem behaves. Setting a checkmark
activates the function in question.
Answer incoming calls activates the
automatic call acceptance after the first
dialling tone.
Local Echo on (E1) switches on the
modem's echo.
Quiet Mode (Q1) switches result
codes off.
Ignore DTR (&D0) ignores the DTR
status change.
(Not used here !)
RS485 (Half Duplex) &H1 half-duplex
control for RS485 with a bus system.
Enable Password protection
(de)activates password protection for
connection passwords (is blocked in
the Serial Modem).
Enable Password protection via the
serial interface only, see P.63)
Note: Please follow the application
instructions for DIGSI 4 on the included
CD/DVD as well as in the Internet
under www.siemens.com/siprotec
Page 43 of 79
Manual 7XV5655-0BB00
C53000-G1176-C175-3
Advertisement
Table of Contents
