Tool Measuring; Types Of Workpiece Measurement; Measurement Of Tool Lengths (Measurement Type 10) - Siemens SINUMERIK 840D sl Function Manual

8.5.4

Tool measuring

The control calculates the distance between the tool tip and the tool carrier reference point T
from the tool length specified by the user.
The following measurement types can be used to measure a tool loaded on a turning or milling
machine:
Measurement types
$AC_MEAS_TYPE = 10
$AC_MEAS_TYPE = 11
$AC_MEAS_TYPE = 22
$AC_MEAS_TYPE = 23
8.5.5

Types of workpiece measurement

8.5.5.1

Measurement of tool lengths (measurement type 10)

Tool length measurement on a reference part that has already been measured ($AC_MEAS_TYPE =
10)
The tool length can be measured on a previously measured reference part.
Extended Functions
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
8.5 Setting zeros, workpiece measuring and tool measuring
Tool measuring
Tool lengths on a reference part that has already been measured
Tool diameter on a reference part that has already been measured
Tool diameters on machines with zoom-in function (ShopTurn)
Tool lengths with stored or current positions (ShopTurn)
Measurement of a tool length of two tools with the following orientation:
Two turning tools with:
Their own reference point each for tool orientation in the approach direction.
One reference point for tool position that is opposite to the approach direc‐
tion and tool orientation.
Two milling tools with:
Their own reference point each for tool orientation in -y.
One reference point for tool position in -y and a tool position opposite to the
approach direction.
Two milling tools rotated 90 degrees with:
Their own reference point each for tool orientation in the approach direction.
One reference point for a tool position that is opposite to the approach
direction and tool orientation.
M5: Measurement
559