Fig. 8-4: Fastening Screws Of The Hard Disk Frame - Bosch Rexroth VSB 40.1 Project Planning Manual

8-4
Maintenance and Installation
5. Loosen the four screws with which the hard disk frame is fixed at the
VSB 40.1:
Fig. 8-3: Loosen the fastening screws at the mounting frame
6. Remove the VSB 40.1 from the mounting plate (mounting frame), so
that it is turned away from you.
7. Loosen the fastening screws of the hard disk frame. The hard disk
and (depending on the device design) the CD DVD drive are mounted
on this plate:
Fig. 8-4: Fastening screws of the hard disk frame
VSB 40.1
83_Gehäuse.JPG
83_Laufwerk2.JPG
DOK-SUPPL*-VSB*40.1***-PR01-EN-P